Instrukcja obsługi Tripp Lite PDUMH20HVATS

Tripp Lite Niesklasyfikowane PDUMH20HVATS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite PDUMH20HVATS (36 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
Owner’s Manual
Metered Rack-Mount PDU
with Automatic Transfer Switch
Models: PDUMH15HVAT, PDUMH15HVATNET, PDUMH20HVAT,
PDUMH20HVAT1, PDUMH20HVATNET, PDUMH20HVATS,
PDUMNH20HVAT1
Series Number: AGAC7625
1. Important Safety Instructions 2
2. Installation 4
2.1 Mounting the PDU 4
2.2 Connecting the PDU 4
2.3 Networking the PDU 6
3. Features 7
4. Configuration and Operation 10
4.1 Automatic Transfer Switch 10
5. Warranty and Product Registration 12
Español 13
Français 25
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
2
SAVE THESE INSTRUCTIONS
• This manual contains instructions and warnings that should be followed
during the installation, operation and storage of this product. Failure to
heed these instructions and warnings may affect the product warranty.
• Warning: This equipment is compliant with Class A of CISPR 32. In a
residential environment, this equipment may cause radio interference.
• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line noise
protection for connected equipment.
• The PDU is designed for indoor use only, in a controlled environment, away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• Keep indoor ambient temperature between 0°C and 50°C (32°F and 122°F).
• The PDU must be installed by a qualified technician only.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Install in accordance with National Electrical Code standards ANSI/NFPA 70 and Canadian
Electrical Code, Part I, C22.1. Be sure to use the proper overcurrent protection for the
installation, in accordance with the plug/equipment rating.
• Connect the PDU to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
• The electrical outlets supplying power to the equipment should be installed near the equipment
and easily accessible.
• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
• Be sure to provide a local disconnect device on any models that are permanently installed
without a plug that is easily accessible.
• Never attempt to install electrical equipment during a thunderstorm.
• Individual equipment connected to the PDU should not draw more current than the individual
PDU’s outlet’s rating.
• The total load connected to the PDU must not exceed the maximum load rating for the PDU.
• Do not attempt to modify the PDU, input plugs or power cables.
• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable
parts inside.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended.
• The AC Mains tolerance of this equipment is +6/-10%
• Short-circuit backup protection and overcurrent protection is provided by the building installation.
• To reduce the risk of fire, connect only to a circuit provided branch circuit overcurrent protection
in accordance with the National Electrical Code, ANSI/NFPA 70 and the Canadian Electrical
Code, Part I, C22.1. Be sure to use maximum 20A overcurrent protection in accordance with
the plug/equipment rating, for the installation.
• The plugs on the power supply cords and appliance inlet serve as the disconnect devices. Make
sure the socket-outlets providing power to the PDU are easily accessible.
• This equipment is not suitable for use in locations where children are likely to be present.
1. Important Safety Instructions
3
1. Important Safety Instructions
• Only those who are properly trained or qualified to use this device should do so. Anyone who is
not trained or qualified should not use this device unless it is under the supervision of someone
who is properly trained or qualified to do so.
• Children must be supervised to ensure that they do not use the device as a toy.
• Never use the device if the cord and plug are damaged. If the device is not working properly or if
it has been dropped or damaged, take it to an authorized service center for inspection and
repair.
• If the power cord is damaged, it must be replaced by the manufacturer, its authorized service
agent or qualified personnel in order to avoid danger.

Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Niesklasyfikowane
Model: PDUMH20HVATS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite PDUMH20HVATS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Tripp Lite

Tripp Lite

Tripp Lite B127A-1A1-BDBH Instrukcja

12 Października 2024
Tripp Lite

Tripp Lite BP36V15-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite RBC92-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite SRCOMBO Instrukcja

8 Października 2024
Tripp Lite

Tripp Lite U360-004-MINI Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite PS-406-HGULTRA Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite T014-001 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite RBC7A Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite N250-P12 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite PS410HGUK Instrukcja

6 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024