Instrukcja obsługi Tripp Lite N286-100G-SR4SA

Tripp Lite nieskategoryzowany N286-100G-SR4SA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite N286-100G-SR4SA (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
1
PRODUCT
REGISTRATION
Register your product today for a
chance to win an ISOBAR® surge
protector in our monthly drawing!
TrippLite.Eaton.com/warranty
Español 5
Français 8
Italiana 11
Deutsch 14
10GBase-SR SFP+ Transceivers with DDM, OM4, 400M, LC
Models: N286-10G-SR-C, N286-10G-SR-G, N286-10G-SR-A, N286-10G-SR-J
25GBase-SR SFP28 Transceiver with DDM, OM4, 100M, LC
Model: N286-25G-SRS-G
40GBase-ESR4 QSFP+ Transceivers with DDM, OM4, 400M, 12F MPO
Models: N286-40G-ESR4-C, N286-40G-ESR4-G, N286-40G-ESR4-A, N286-40G-ESR4-J
100GBase-SR4 QSFP28 Transceivers with DDM, 100M, 12F MPO
Models: N286-100G-SR4SC, N286-100G-SR4SG, N286-100G-SR4SA, N286-100G-SR4SJ
400GBase-SR8 QSFP-DD Transceivers with DDM, 100M, 16F MPO
Models: N286-400G-SR8-G, N286-400G-SR8-C
1000Base-SX SFP Transceivers with DDM, OM2, 550M, LC
Models: N286-01G-SX-G, N286-01G-SX-A, N286-01G-SX-J, N286-01G-SX-C
Purchased product
may differ from image.
2
Installation
Notes:
• The installation steps outlined below apply to all N286 transceivers listed on the cover page. However, product
features will differ. Please reference TrippLite.Eaton.com for more information about the features that apply to
your specific model.
• Transceivers are static-sensitive devices that require proper handling. An anti-static ESD wrist strap (such as
P999-000, sold separately) should always be used when handling a transceiver.
• Never install a transceiver with cables already connected. Always remove cables prior to installation to avoid
damaging the cable, connectors and/or optical interface.
• Installing and uninstalling the transceiver numerous times will shorten its useful lifespan. Do not install and
uninstall more times than is necessary.
1. Remove the transceiver from its packaging, leaving the dust plugs inserted in the optical
bores.
2. Gently insert the transceiver into your device’s module socket, pressing on the dust plugs
until the transceiver locks into place.
3. Verify that the transceiver is locked into place by trying to remove it from the module
socket without releasing the latch. If it stays in place, it is properly seated. If it does not,
re-insert it, firmly pressing on the dust plugs until it locks into place.
4. Once you have verified that the transceiver is securely locked into place, remove the dust
plugs from the optical bores and connect your cables.
Note: Save the dust plugs so they can be re-used if you must uninstall and re-install the transceiver.
3
Warranty and Product Registration
3-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original
defects in material and workmanship for a period of three (3) years from the date of initial purchase. If the
product should prove defective in material or workmanship within that period, Seller will repair or replace
the product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT,
MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED
WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL
INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied
warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is suitable,
adequate or safe for the use intended. Since individual applications are subject to great variation, the
manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any
specific application.
Product Registration
Visit TrippLite.Eaton.com/warranty today to register your new product. You’ll be automatically entered into a
drawing for a chance to win a FREE Eaton Tripp Lite series product!*
*No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC Notice, Class A
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense. The user must use shielded cables and connectors with this
equipment. Any changes or modifications to this equipment not expressly approved by Eaton could void the
user’s authority to operate this equipment.
WEEE Compliance Information for Eaton Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing
regulations, when customers buy new electrical and electronic equipment from Eaton, they are
entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the
country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be
expected to cause the failure of the life support equipment or to significantly affect its safety or
effectiveness is not recommended.
Eaton has a policy of continuous improvement. Specifications are subject to change without notice. Photos
and illustrations may differ slightly from actual products.

Specyfikacje produktu

Marka: Tripp Lite
Kategoria: nieskategoryzowany
Model: N286-100G-SR4SA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite N286-100G-SR4SA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Tripp Lite

Tripp Lite

Tripp Lite B127A-111-BHTH Instrukcja

4 Września 2024
Tripp Lite

Tripp Lite B064C-16-1-IP Instrukcja

19 Sierpnia 2024
Tripp Lite

Tripp Lite U442-DOCK40-6 Instrukcja

10 Lipca 2024
Tripp Lite

Tripp Lite DMCSD3545M Instrukcja

29 Maja 2024
Tripp Lite

Tripp Lite CSHANDLEKIT Instrukcja

28 Maja 2024
Tripp Lite

Tripp Lite OMNIVSX850 Instrukcja

28 Maja 2024
Tripp Lite

Tripp Lite SmartRack SRCABLEVRT3FC Instrukcja

28 Maja 2024
Tripp Lite

Tripp Lite NPOEI-90W-1G Instrukcja

27 Maja 2024
Tripp Lite

Tripp Lite B136-101 Instrukcja

27 Maja 2024
Tripp Lite

Tripp Lite SmartRack SR2POST12HD Instrukcja

27 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024