Instrukcja obsługi Tripp Lite EN1111


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite EN1111 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
1
Installation Guide
11” x 11” ABS Wireless Access
Point Enclosure with Lock
Model: EN1111
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All trademarks are the sole property of their respective owners.
Español 5 • Français 9 • 13Русский
2
Components List
Installation
IMPORTANT:
Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or
faulty, visit www.tripplite.com/support for service.
(x1) (x1) (x1) (x1)(x2) (x2) (x2) (x2)
1. Mount Enclosure Box to Wall
Mark the exact location of the
mounting holes
Attach the
enclosure onto
the wall
Drill pilot holes
Find a wood stud
location for mounting
the enclosure
(Mounting Hardware
Not Included)
3
Installation
IMPORTANT!
Attach all data and power cables to the access point prior to attaching to the enclosure.
Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws (not included) to secure the
enclosure in place.
Make sure mounting screws are anchored into the center of the studs. Use of a studnder is highly recommended.
If there is no stud at the mounting location, it is recommended you use four anchors to secure the enclosure in place. Due to the
weight of the enclosure, plastic expansion wall anchors are not recommended for drywall installations. Suitable anchors include: thread-
ed drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors (a.k.a. molly bolts) or toggle bolts.
If placing the enclosure over a telecommunications receptacle, remove the wall plate, then fasten the enclosure to the wall. Once se-
cured, fasten the wall plate over the receptacle.
If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be mounted inside the unit.
Use an adhesive-backed surface mount box.
2. Run Data and Power Cable (If Required) Through the Rear Cutout or Side
Conduit Cutout
3. Using the Provided Screws, Attach the Access Point
3a. Cisco Universal Bracket (AIR-AP-BRACKET-2)* Installation
AIR-AP-BRACKET-2
Security Tab
Access Point
Security Tab
Zip Tie
(Included)
* Cisco brackets not included.


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Niesklasyfikowane
Model: EN1111

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite EN1111, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Tripp Lite

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane