Instrukcja obsługi Tripp Lite B125-101-60-IR

Tripp Lite odbiornik B125-101-60-IR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite B125-101-60-IR (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
1
Owner’s Manual
HDMI + IR over Dual
Cat5/Cat6 Extender Kit
Model: B125-101-60-IR
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
16-02-445-9334B1.indd 1 3/10/2016 11:27:09 AM
2
Features
Package Includes
Optional Accessories
Extend a 1920 x 1080 (1080p) @ 60Hz signal up to 150 ft. using
Cat5/Cat6 cabling
IR control allows you to use your HDMI source’s remote control in the
same location as your extended monitor
Supports 7.1 Channel Surround Sound, DTS-HD and Dolby® TrueHD
audio
Receiver unit features built-in Equalization control to adjust video image
Supports EDID passthrough; HDCP and 3D compatible
Plug-and-play; no software required
Transmitter and Receiver Units
IR-TX and IR-RX Cables
(x2) External Power Supplies (Input: 100-240V, 50/60Hz, 0.5A
Output: 9V, 1A)
Screwdriver for Equalization adjustment
Owner’s Manual
N202-Series Cat6 24 AWG Solid Wire Patch Cables
P568-Series High Speed HDMI Cables
16-02-445-9334B1.indd 2 3/10/2016 11:27:09 AM
3
Installation
Refer to the installation diagram below as you perform these steps.
Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6 cable
must be used. The use of stranded wire Cat5e/6 cable or cable with a gauge size
higher than 24 AWG will result in shorter extension distance. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG, solid wire cabling.
7
83
9
6
5
CH1
CH2
TRANSMIT TER RECEIVER
Blu-ray™ PLAYER
1080p (60 Hz)
DISPLAY
1080p (60 Hz)
Up to 150 ft. Cat5e/6
2
4
1. Make sure all equipment being connected is powered off.
2. Connect the HDMI source to the HDMI input on the transmitter unit.
3. Connect the IR-TX cable to the IR port on the transmitter unit.
Note: The IR-TX cable transmits the IR signal to the device being controlled.
Locate the IR-TX unit in an area with clear line of sight to the source
(e.g. Blu-ray player).
4. Connect the external power supply to the transmitter, then plug it into a
Tripp Lite Surge Protector, Uninterruptible Power Supply (UPS), or Power
Distribution Unit (PDU). The green LEDs on both the transmitter and
receiver units will illuminate to indicate that power is being received.
The orange LED on the receiver unit will illuminate to indicate that a
connection has been made with the transmitter unit via Cat5e/6 cable.
5. Connect the CH1 RJ45 port on the transmitter to the CH1 RJ45 port on
the receiver using Cat5e/6 cable.
Note: See the installation diagram for maximum extension distance at 1080p
(60Hz) video resolutions.
16-02-445-9334B1.indd 3 3/10/2016 11:27:09 AM


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: odbiornik
Model: B125-101-60-IR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite B125-101-60-IR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Tripp Lite

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik