Instrukcja obsługi Tripp Lite B021-000-19-HD2

Tripp Lite Niesklasyfikowane B021-000-19-HD2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite B021-000-19-HD2 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
1
Owner’s Manual
1U Rackmount Console
(for KVM Switch or Server)
Model:
B021-000-19-HD2
Series No:
AGCB6533
Package Contents
Features
• Rackmount console (LCD monitor, keyboard, touchpad) in an integrated 1U rackmountable housing
• Sleep mode when the monitor cover is closed
• Rackmountable in EIA-standard 19-inch rack (1U)
• Includes rackmount brackets
• Supports resolutions up to 1920 x 1080
• Includes a USB 2.0 pass-through port, which can be used to provide easy access to a USB port on a connected device
(KVM switch or computer)
• Includes a DVI-I port for connecting to a DVI or VGA* server or KVM switch
*VGA server connection using the included DVI-to-VGA adapter
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation and operation of the rackmount console
described in this manual. Read all instructions thoroughly before attempting to install or operate the rackmount console. Failure to comply
will void the warranty and could damage the rackmount console or connected equipment.
WARNING:
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the
life support equipment or to significantly affect its safety or effectiveness is not recommended.
Español p. 5 Français p. 9 Русский p. 13
• 1U Rackmount Console
• KVM Cable Kit (DVI-I, USB)
• DVI (Female) to VGA (Male) Adapter
• AC Power Cord
• Owner’s Manual
• Mounting Brackets
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
2
Introduction
Front View
1 Handle: Pull to slide the module out; push to slide the
module in.
2 LCD Monitor: After sliding the module out, flip up the cover to
access the LCD monitor, keyboard and touchpad.
3 Keyboard
4 Rackmounting Brackets: The brackets secure the chassis to
an EIA-standard 19-inch rack or rack enclosure.
5 2-Button Touchpad: Press the left button to left-click; press
the right button to right-click. Scroll up and down the screen by
running finger up or down the far right side of the touchpad.
6 Console and LCD Controls: The controls located here include
the console power On/Off button and the buttons used to control
the position and picture setting of the LCD display.
7 Pass-Through USB Port: This port is inactive until a USB A
male/male cable (Tripp Lite UR020-Series) is used to connect
the pass-through port on the back of the console to a USB port
on a computer or KVM switch. When active, a USB device
connected to the front of the console will be available for use
with the connected computer or KVM switch.
Rear View
1 Console Port Section: Connects the console to your server or
KVM switch with the included KVM cable kit.
2 Power Socket: The AC power cord plugs in here.
3 Pass-Through USB Port: This port is connected to the pass-
through USB port on the front of the console. The front pass-
through port is active when a USB A male/male cable (Tripp Lite
UR020-Series) is connected between the pass-through port on
the back and a USB port on a KVM switch or server.
Rackmounting
Tripp Lite's 1U Rackmount Console is designed for mounting in a 1U
rack system. The various mounting options are explained in the
sections that follow.
Standard 4-Post Rackmounting
The standard rackmounting brackets that come attached to the unit
allow it to be installed in EIA-standard 1U racks by a single
individual.
1 Slide out the rear mounting brackets from the console, and
mount both brackets (separate from the console) to the inside
rear of a 1U rack system using user-supplied screws.
2 Gently slide the console into the two rear-mounted brackets in
the rack. Secure the console in place by inserting user-supplied
screws.
2-Post Rackmounting
The console can also be mounted in a 2-post rack using the
optional 2-Post Rackmount Kit (Tripp Lite model B019-000). The
mounting hardware allows for the console to be opened with the
drawer in any position. The kit provides added stability and prevents
the console frame from twisting. See the B019-000 Owner's Manual
for detailed mounting instructions.
1
3
7
1
2
12 3
4
2
5
6
3
Refer to the installation diagrams below as you perform these steps.
Note: Make sure the power to the computer or KVM switch being connected to the console is powered off before proceeding with the installation.
1 Using the included cable kit, connect the DVI connector marked to the DVI port on the back of the console.CONSOLE
2 Connect the DVI connector marked to the DVI port on your server or KVM switch. SERVER
Note: If you are connecting to a computer with a VGA port, use the included DVI-I to VGA adapter. If your server or KVM switch uses a DVI-D port, you will need a
DVI-I to DVI-D adapter such as Tripp Lite’s P118-000 (sold separately). To connect to a server or KVM switch that uses an HDMI port, you will need a DVI to
HDMI adapter, such as Tripp Lite’s P132-000 (sold separately).
3 Connect the USB connector on the SERVER side of the included cable kit to a USB port on your server or KVM switch.
Note: Although KVM switches contain two USB console ports for keyboard and mouse, you can plug the cable kit’s USB connector into either port.
4 Remove the USB covers from each of the pass-through USB ports. Connect the pass-through USB port on the back of the console to a
USB port on a computer or KVM switch using a USB A male/male cable, such as Tripp Lite’s UR020-Series. Connect a USB device to the
pass-through USB port on the front of the console.
Note: The pass-through ports do not connect to the internal components in the console (keyboard, touchpad or console).
5 Connect the power cord to the socket on the back of the console, and then plug it into a Tripp Lite Surge Protector, Power Distribution
Unit (PDU), or Uninterruptible Power Supply (UPS).
6 Power on the connected computer or KVM switch.
7 Turn on the LCD screen by pressing the On/Off button on the control panel of the built-in monitor.
Computer Installation
Note: The diagram below shows the connection of a computer with USB keyboard and mouse ports. To connect to a PS/2 computer, use a PS/2 to
USB adapter such as Tripp Lite’s 0DT60002 (sold separately).
Function Specification
Connectors
Console 1 x DVI-I female
Cable Kit 1 x DVI-I male to 1 x DVI-I male, 1 x USB male
Power 1 x IEC-60320-C14 AC socket (100-240V~, 50/60Hz)
Comm. 1 x USB (Type A to Type A)
LCD Resolution 1920 x 1080; DDC2B
Environment
Operating Temperature: 32° to 104° F
Storage Temperature: -13° to 140° F
Humidity: 20 - 90% RH Noncondensing
Housing Metal
Weight 27.78 lbs.
Dimensions (L x W x H) 27.28 x 18.78 x 1.7 in.
Installation
Specifications
KVM Installation
Note: The diagram below shows the connection of a B042-016 KVM switch. The console ports of different model KVM switches may be located elsewhere on
the unit.
Computer Installation
KVM Installation
1
1
2
2
3
3
5
5
4
4

Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Niesklasyfikowane
Model: B021-000-19-HD2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite B021-000-19-HD2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Tripp Lite

Tripp Lite

Tripp Lite B127A-1A1-BDBH Instrukcja

12 Października 2024
Tripp Lite

Tripp Lite BP36V15-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite RBC92-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite SRCOMBO Instrukcja

8 Października 2024
Tripp Lite

Tripp Lite U360-004-MINI Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite PS-406-HGULTRA Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite T014-001 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite RBC7A Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite N250-P12 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite PS410HGUK Instrukcja

6 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024