Instrukcja obsługi Tripp Lite AV550SC

Tripp Lite UPS AV550SC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite AV550SC (24 stron) w kategorii UPS. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
1
Owner’s Manual
Backup Power Block
Model: AV550SC
Series Number: AGBC6650
Not suitable for mobile applications.
Español 9 • Français 17
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
17-05-142-932710.indb 1 6/2/2017 11:48:04 AM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during
the installation, operation and storage of this product. Failure to heed these
warnings may affect the warranty.
UPS Location Warnings
Use caution when lifting the UPS system. Because of the considerable weight of all
rack-mount UPS systems, at least two people should assist in lifting and installing
them.
Install the UPS system indoors in an area free from excess moisture, heat, dust,
conductive contaminants, and direct sunlight.
The UPS system operating temperature is 32° to 104°F (0° to 40°C). For optimum
battery performance, the ambient temperature should be maintained between 68° and
77°F (20° and 25°C).
Leave adequate space around all sides of the UPS system for proper ventilation. Do
not obstruct its vents or fan openings.
When mounting the UPS system in tower orientation, make sure the LCD screen panel
is at the top of the UPS system, not at the bottom.
Do not mount unit with its front or rear panel facing down (at any angle). Mounting in
this manner will seriously inhibit the unit’s internal cooling, eventually causing product
damage not covered under warranty.
The UPS system must be returned to Tripp Lite for battery replacement. Visit
www.tripplite.com/support and click the product returns link to request a Returned
Material Authorization (RMA) number (an RMA number is required for servce). Once
the product request information is completed, an assigned RMA number and shipping
instructions will be sent to your email account. See for more Storage and Service
information.
UPS Connection Warnings
CAUTION: To reduce the risk of re, connect only to a circuit provided
with branch circuit overcurrent protection in accordance with the National
Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1.
Short circuit backup protection overcurrent protection is provided by the
building installation. Be sure to use the proper overcurrent protection for the
installation in accordance with the plug/equipment rating.
The UPS system contains its own energy source (battery). The output terminals may be
live even when the UPS system is not connected to an AC supply.
Connect the UPS system to a properly grounded AC power outlet. Do not modify the
UPS system’s plug in a way that would eliminate its connection to ground. Do not use
adapters that eliminate the UPS system’s connection to ground.
Do not plug the UPS system into itself. This will damage the UPS system and void the
warranty.
If connecting the UPS system to a motor-powered AC generator, the generator must
provide ltered, frequency-regulated computer-grade output.
17-05-142-932710.indb 2 6/2/2017 11:48:04 AM
3
Important Safety Instructions
Equipment Connection Warnings
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended.
Do not connect surge protectors or extension cords to the output of your UPS system.
This might damage the UPS system and may affect the surge protector and UPS
warranties.
Battery Warnings
Batteries can present a risk of electrical shock and burn from high short-circuit current.
Observe proper precautions. Do not dispose of the batteries in are. Do not open the
UPS or batteries. Do not short or bridge the battery terminals with any object. There
are no user-serviceable parts inside the UPS. At the end of the UPS system’s life,
follow best practice by discharging the battery prior to disposal. Refer to local codes
for disposal requirements. Do not connect or disconnect battery packs when the UPS
system is operating on battery power.
Do not operate the UPS system without batteries.
17-05-142-932710.indb 3 6/2/2017 11:48:04 AM


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: UPS
Model: AV550SC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite AV550SC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje UPS Tripp Lite

Instrukcje UPS

Najnowsze instrukcje dla UPS

APC

APC Back-UPS BN575G Instrukcja

12 Października 2024
APC

APC Smart-UPS SMC1000-2UC Instrukcja

12 Października 2024
APC

APC Back-UPS BX550CI-AR Instrukcja

12 Października 2024
APC

APC Back-UPS BN600G Instrukcja

12 Października 2024
APC

APC Back-UPS BX650CI-GR Instrukcja

12 Października 2024
APC

APC Back-UPS BX950U-FR Instrukcja

12 Października 2024
APC

APC Back-UPS BX650LI Instrukcja

12 Października 2024
APC

APC Easy UPS BVX1000UXI Instrukcja

12 Października 2024
Eaton

Eaton EX 3000VA 3U XL Instrukcja

11 Października 2024