Instrukcja obsługi TRENDnet TPE-TG240g

TRENDnet Schakelaar TPE-TG240g

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TRENDnet TPE-TG240g (5 stron) w kategorii Schakelaar. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
Ÿ16-Port Gigabit PoE+ Switch
TPE-TG160g
ŸQuick Installation Guide (1)
TPE-TG160 (V1) /07.30.2015
Minimum Requirements
ŸTPE-TG160g
ŸQuick Installation Guide
ŸPower cord
ŸRack mount kit
ŸComputer with network adapter installed
ŸRJ-45 Network cable
Package Contents
1. Before You Start
1
Optional Equipment
ŸEIA standard 19” rack
2. LEDs
LED Color Definition
Green
Red
Device is on
Device is off
The total PoE output power has reached maximum capacity, do not connect any
more PoE devices to the unit.
System has adequate power reserves to power another device
PWR
PWR Max
Green
There is an error with the PoE connection at this port
A gigabit connection has been detected
Data is being transmitted
Fan
An ethernet / fast ethernet connection has been detected
Green
Amber
LINK/ACT
No active connectionOff
Sequence
Solid
Off
Solid
Solid
Solid
Blinking
Solid
Off
Blinking Data is being transmitted
PoE
Red
Off
The fan has experienced a failure, and is not operational
The switch is connected and supplying power to a PoE device
Solid
Off The fan is operating normally
Amber
Off
Solid
No PoE device has been detected at this port
Off
2
3. Hardware Installation
Note: The maximum amount of power available is 30 Watts per port and 246 Watts total. If a power
overload has occurred, the Switch will prioritize the distribution of power by port (from lowest to highest).
That is, port 1 will receive the highest priority and port 4 will receive the lowest priority. The ports with lower
priority will have their PoE function disabled until sufficient power becomes available.
1 power adapter power adapter. Plug the power cord into the . Connect the to the TPE-TG160g and then
to a power outlet.
2. Connect an RJ-45 network cable from the TPE-TG160g to your computer's network port.
3 network . Connect an RJ-45 cable from a port on the TPE-TG160g to the port of the PoE device
(e.g. TV-IP310PI).
4: Verify the following LEDs are on: , and . Power PoE Status Link/ACT
1
2
3PoE

Specyfikacje produktu

Marka: TRENDnet
Kategoria: Schakelaar
Model: TPE-TG240g

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TRENDnet TPE-TG240g, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Schakelaar TRENDnet

TRENDnet

TRENDnet TPE-1020WS Instrukcja

4 Października 2024
TRENDnet

TRENDnet TPE-TG160H Instrukcja

4 Października 2024
TRENDnet

TRENDnet TPE-TG240g Instrukcja

4 Października 2024
TRENDnet

TRENDnet TI-TPG80 Instrukcja

4 Października 2024
TRENDnet

TRENDnet TI-G62 Instrukcja

4 Października 2024
TRENDnet

TRENDnet TPE-113GI Instrukcja

3 Października 2024
TRENDnet

TRENDnet TEG-30262 Instrukcja

3 Października 2024
TRENDnet

TRENDnet TI-EU120 Instrukcja

3 Października 2024
TRENDnet

TRENDnet TEG-S591 Instrukcja

3 Października 2024
TRENDnet

TRENDnet TPE-119GI Instrukcja

3 Października 2024

Instrukcje Schakelaar

Najnowsze instrukcje dla Schakelaar

CyberPower

CyberPower PDU41116 Instrukcja

4 Października 2024
Suevia

Suevia DigiAstro 2 Instrukcja

4 Października 2024
Rex

Rex 910402 Instrukcja

4 Października 2024
Digitus

Digitus DS-12850 Instrukcja

4 Października 2024
SEADA

SEADA SWM36 Instrukcja

3 Października 2024
SEADA

SEADA SWM16 Instrukcja

3 Października 2024
SEADA

SEADA HBT100UB Instrukcja

3 Października 2024
SEADA

SEADA SWM08 Instrukcja

3 Października 2024
SEADA

SEADA MS-HBT88B70 KIT Instrukcja

3 Października 2024
SEADA

SEADA SWM80 Instrukcja

3 Października 2024