Instrukcja obsługi TP-Link TL-SL1210MP

TP-Link nieskategoryzowany TL-SL1210MP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link TL-SL1210MP (17 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 28 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/17

Regulatory Compliance

Switch

For Class A switch with power adapter:

FCC Compliance Information Statement

Product Name: Switch

Model Number: T1500G‑8T / TL‑SF1005LP / TL‑SF1005P / TL‑SF1008LP / TL‑SF1008P /

TL‑SF1009P / TL‑SG1005LP / TL‑SG1005P / TL‑SG1008P / TL‑SG105‑M2 / TL‑SG108‑M2 / TL‑

SG108PE /TL‑SG116 / TL‑SG116E / TL‑SG1210P / TL‑SG2008 /TL‑SG2008P / TL‑SG2210P / TL‑

SG3428 /TL‑SL1210MP

Component Name Model

Power Adapter

T120100‑2B1 (For T1500G‑8T / TL‑SG116E / TL‑SG116 / TL‑

SG2008)

T120150‑2B1 (For TL‑SG105‑M2 / TL‑SG108‑M2)

T120200‑4 (For TL‑SG3428)

T535081‑2‑DT (For TL‑SG1005LP / TL‑SF1005LP / TL‑SF1008LP)

T535131‑2‑DT (For TL‑SG108PE/TL‑SG2210P / TL‑SG1005P

/ TL‑SG1008P / TL‑SG1210P / TL‑SF1005P / TL‑SF1008P /

TL‑SF1009P)

T535135‑2‑DT (For TL‑SG2008P)

T535243‑2‑DT (For TL‑SL1210MP)

Responsible party:

TP‑Link USA Corporation, d/b/a TP‑Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: https://www.tp‑link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Product Name: Power Adapter

Model Number: T120100‑2B1 / T120150‑2B1 /T480125‑2‑DT / T535081‑2‑DT / T535131‑2‑DT /

T535135‑2‑DT / T535243‑2‑DT

Responsible party:

TP‑Link USA Corporation, d/b/a TP‑Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: https://www.tp‑link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

■Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Specyfikacje produktu

Marka:	TP-Link
Kategoria:	nieskategoryzowany
Model:	TL-SL1210MP
Kolor produktu:	Czarny
Standardy komunikacyjne:	IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Obsługa PoE:	Tak
Możliwości montowania w stelażu:	Nie
Typ przełącznika:	Nie zarządzany
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	9
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Ilość portów Fast Ethernet (copper):	8
Obsługa 10G:	Nie
Wielkość tabeli adresów:	2000 wejścia
Przepustowość rutowania/przełączania:	5.6 Gbit/s
Podpora kontroli przepływu:	Tak
Prędkość przekazywania:	4.166 Mpps
Zasilacz dołączony:	Tak
Całkowita Power over Ethernet (PoE) budżetu:	124 W
Technologia okablowania Copper Ethernet:	10BASE-T, 100BASE-TX
Automatyczne MDI/MDI-X:	Tak
Store-and-forward:	Tak
Bez wiatraka:	Tak
Wspierany auto-learning adresów MAC:	Tak
Wspierany auto-aging adresów MAC:	Tak
Auto-Negocjacja:	Tak
Obsługiwane typy kabli:	Cat3, Cat4, Cat5, Cat5e
Ilość portów Gigabit Ethernet:	1
Power over Ethernet Plus (PoE +) ilość portów:	8
Ilość slotów Modułu SFP:	1
Zasilanie przez Ethernet (PoE) zasilanie na port:	30 W