Instrukcja obsługi TP-Link TL-SG108-M2

TP-Link przełącznik TL-SG108-M2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link TL-SG108-M2 (17 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/17

Regulatory Compliance

Switch

For Class A switch with power adapter:

FCC Compliance Information Statement

Product Name: Switch

Model Number: T1500G‑8T / TL‑SF1005LP / TL‑SF1005P / TL‑SF1008LP / TL‑SF1008P /

TL‑SF1009P / TL‑SG1005LP / TL‑SG1005P / TL‑SG1008P / TL‑SG105‑M2 / TL‑SG108‑M2 / TL‑

SG108PE /TL‑SG116 / TL‑SG116E / TL‑SG1210P / TL‑SG2008 /TL‑SG2008P / TL‑SG2210P / TL‑

SG3428 /TL‑SL1210MP

Component Name Model

Power Adapter

T120100‑2B1 (For T1500G‑8T / TL‑SG116E / TL‑SG116 / TL‑

SG2008)

T120150‑2B1 (For TL‑SG105‑M2 / TL‑SG108‑M2)

T120200‑4 (For TL‑SG3428)

T535081‑2‑DT (For TL‑SG1005LP / TL‑SF1005LP / TL‑SF1008LP)

T535131‑2‑DT (For TL‑SG108PE/TL‑SG2210P / TL‑SG1005P

/ TL‑SG1008P / TL‑SG1210P / TL‑SF1005P / TL‑SF1008P /

TL‑SF1009P)

T535135‑2‑DT (For TL‑SG2008P)

T535243‑2‑DT (For TL‑SL1210MP)

Responsible party:

TP‑Link USA Corporation, d/b/a TP‑Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: https://www.tp‑link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Product Name: Power Adapter

Model Number: T120100‑2B1 / T120150‑2B1 /T480125‑2‑DT / T535081‑2‑DT / T535131‑2‑DT /

T535135‑2‑DT / T535243‑2‑DT

Responsible party:

TP‑Link USA Corporation, d/b/a TP‑Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: https://www.tp‑link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

■Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Specyfikacje produktu

Marka:	TP-Link
Kategoria:	przełącznik
Model:	TL-SG108-M2
Kolor produktu:	Czarny
Źródło zasilania:	DC
Wysokość produktu:	35 mm
Szerokość produktu:	226 mm
Głębokość produktu:	131 mm
Szerokość opakowania:	240 mm
Wysokość opakowania:	70 mm
Głębokość opakowania:	315 mm
Standardy komunikacyjne:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3p, IEEE 802.3u, IEEE 802.3x
Obsługa PoE:	Nie
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Przewody:	AC, LAN (RJ-45)
Kod zharmonizowanego systemu (HS):	85176990
Waga wraz z opakowaniem:	1350 g
Napięcie:	12 V
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 90 %
Obsługa jakość serwisu (QoS):	Tak
Prąd wejściowy:	1.5 A
Możliwości montowania w stelażu:	Nie
Typ przełącznika:	Nie zarządzany
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	8
Podstawowe przełączania Ethernet RJ-45 porty typ:	2.5G Ethernet (100/1000/2500)
Obsługa 10G:	Nie
Wielkość tabeli adresów:	16000 wejścia
Przepustowość rutowania/przełączania:	40 Gbit/s
Montaż naścienny / rzutowanie na sufit:	Tak
Podpora kontroli przepływu:	Tak
Prędkość przekazywania:	29.8 Mpps
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	10000
Zasilacz dołączony:	Tak
Ilość portów 2,5G Ethernet (miedź):	8
Automatyczne MDI/MDI-X:	Tak
Store-and-forward:	Tak
Emisja ciepła:	53.4 BTU/h
Bez wiatraka:	Tak
Auto-Negocjacja:	Tak
Pamięci bufora pakietów:	1.5 MB