Instrukcja obsługi TP-Link Tapo C425 KIT

TP-Link Kamera monitorująca Tapo C425 KIT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link Tapo C425 KIT (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Blinking red and green

Blinking red slowly

Solid amber

Blinking red quickly

Solid red

Blinking amber quickly for 3 seconds

Solid green

Blinking green quickly

Starting up

Plugging in USB charger

Connected to the cloud

Ready for setup

Connecting to Wi-Fi

Connected to Wi-Fi

Camera resetting

Camera updating

Camera Status LED Indication

Solar-Powered Security Camera KIT

Quick Start Guide

*Images may dier from actual products.

Note:

1. Peel o lm from the camera before use.

2. Charge the battery using the USB cable in the package. Inappropriate cables may result in slow

charging or failure to charge.

3. Warning: Do not tear o the silicone part by force as it may aect the waterproof performance.

4. When you plug in the USB charger, the LED should blink amber quickly for 3 seconds. If not,

make sure the power is running and check your connection.

5. Keep the ports rmly covered when not in use to ensure waterproof performance.

6. Check the battery status on the Tapo app after setup.

1. Tapo Get the app from the App Store or Google Play.

The battery comes partially charged. We recommend that you fully charge

the battery before use. This will take about hours.ve and a half

5V 2A USB Charger

2. Press and hold on your camera for about 3 seconds to turn it on.

Open the Tapo app, tap the button in the app, and select your model.

Then follow the app instructions to set up your camera.

1. Avoid placing behind glass. Glass will obstruct the motion

sensor of your camera.

2. Choose a proper location to mount your camera, or it will be

triggered too often by false alarms.

• Avoid pointing the camera directly at swaying trees.

• Avoid pointing the camera directly at vehicles and pedestrians on

the road.

• Avoid pointing the camera directly at street lamps and sunlight.

3. Mount your camera to the side so that movement goes across the

lens’ eld of view to better trigger motion detection and AI detection.

*Do not mount facing the

direction of movement.

4. Do not place the camera upside down.

5. Keep the motion sensor level for best results.

6. Tilt the camera downwards at an angle of about 15°.

15°

The position and tilt angle of the solar panel greatly aects the solar

eciency.

1. Choose a location where the solar panel gets the most sunlight

throughout the year.

2. Position the panel south-facing in the Northern Hemisphere or

north-facing in the Southern Hemisphere. The recommended tilt angle

between the panel and the horizontal ground is 35° ~ 45°.

3. Regularly wipe the panel to remove dust and debris.

Appearance

Front Side

1 2 3 4 1

microSD

11 USB Micro B Charging Port

9microSD Card Slot

8Speaker

7Power Button

Open the cover. Insert a microSD card*

and initialize it on the Tapo app for local

recording.

Reset Button

Open the cover. Use a pin to press and

hold for at least 5 seconds to reset the

camera to factory default settings.

Open the cover for USB charging.

*microSD card not included.

Press and hold for about 3 seconds to

turn on/o the camera.

Motion Sensor

Spotlights

Light Sensor

6Status LED

5Lens

4Microphone

Charge the Battery

Set Up the Camera

Camera Mounting Tips

Solar Panel Mounting Tips

Back Side

1. Drill Holes

Stick the mounting template to a solid and

level wall surface. Drill three screw holes

according to the template.

Use the appropriate waterproof gasket when connecting the solar panel to

your camera. The gasket protects your camera from exposed moisture and

dust that may damage the camera.

Φ=6 mm (15/64 in.)

2. Mount Bracket

Insert three wall anchors into the

holes and use the mounting screws to

ax the solar panel bracket over the

anchors. Then, insert two screw caps

into the upper screw holes.

3. Install the Solar Panel

Slide the solar panel onto the mounting

bracket until it clicks into place.

4. Adjust Solar Panel Angle

Loosen the adjustable screw, tilt the solar

panel to adjust the angle, and then tighten

the adjustable screw.

5. Install Camera & Adjust Angle

Install the camera onto the bracket and tilt the

camera downwards at an angle of about 15°.

15°

Safety Information

1. Install Waterproof Gasket

Insert the waterproof gasket into the camera’s charging port. Ensure that

the gasket is tightly sealed.

2. Power On Camera

Connect the solar panel by inserting the connector with the black ring into

the USB adpater until snug. Then connect the USB adpater to the

charging port of your camera.

Wall Anchors ×3 + Self-tapping Screws ×3 Screw Caps ×2

For Solar Panel:

• Keep the device away from re or hot environments. DO NOT immerse in water or any other liquid.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives

2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://ww w.tapo.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic

Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at https://ww w.tapo.com/support/ukca/

For Camera:

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended.

• Do not use the device where wireless devices are not allowed.

• Adapter shall be easily accessible.

• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't

hesitate to contact us.

• Keep the device away from re or hot environments. DO NOT immerse in water or any other liquid.

• Do not disassemble, repair or modify the product.

• Do not place near automatically controlled devices such as re alarms. Radio waves emitted from this product may cause such devices to

malfunction resulting in an accident.

• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.

• Do not use liquid to clean the product. Only use a dry cloth.

• Never put metal objects inside the product. If a metal object enters the product turn o the circuit breaker and contact an authorised

electrician.

• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as

pacemakers or hearing aids to determine if they are adequality shielded from external RF (radio frequency) energy.

• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF

energy.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will

occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives

2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://ww w.tapo.com/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment

Regulations 2017.

The original UK declaration of conformity may be found at https://ww w.tapo.com/support/ukca/

CAUTION!

Avoid replacement of a battery with an incorrect type that can defeat a safeguard.

Avoid disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of

ammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of

ammable liquid or gas.

• Do not place heavy objects on top of the product.

• When you leave the product unused for a long time unplug the product from the power outlet.

• This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.

• Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F)

• When mounting the camera with the magnetic base, we recommend installing it no higher than 2 meters.

• Adapter should be used indoors where the ambient temperature is lower than or equal to 40°C.

If the power cable is too short...

Extend the power cable using the provided extension cable. Insert the

connector with the black ring into the extension until snug and use the

appropriate gasket when connecting the solar panel to your camera.

Use the cable zip tie provided to bundle up the excess cable. Once

tightened, the zip tie cannot be easily adjusted. To release the tie, you

will need to cut the zip tie.

If the power cable is too long...

Extension CableSolar Panel Connector

Support

For technical support, the user guide, FAQs, warranty

and more, please visit https://www.tapo.com/support/

Black Ring

USB Adapter

Mount Solar Panel & Camera

5Connect to the Camera

35°-45°

Specyfikacje produktu

Marka:	TP-Link
Kategoria:	Kamera monitorująca
Model:	Tapo C425 KIT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TP-Link Tapo C425 KIT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca TP-Link

TP-Link InSight S345 Instrukcja

9 Października 2024

TP-Link InSight S485 Instrukcja

9 Października 2024

TP-Link Tapo TD25 Instrukcja

7 Października 2024

TP-Link Tapo C425 KIT Instrukcja

5 Października 2024

TP-Link VIGI C230I Mini Instrukcja

3 Października 2024

TP-Link Tapo TC40 Instrukcja

3 Października 2024

TP-Link VIGI C330 Instrukcja

3 Października 2024

TP-Link VIGI C240I Instrukcja

3 Października 2024

TP-Link VIGI C320I Instrukcja

3 Października 2024

TP-Link VIGI C440I Instrukcja

29 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs CCD-401C Instrukcja

15 Października 2024

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024

D-Link DCS-7510 Instrukcja

15 Października 2024

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024

Alecto DVC-215IP Instrukcja

13 Października 2024

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024