Instrukcja obsługi TP-Link AC3200

TP-Link router AC3200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link AC3200 (12 stron) w kategorii router. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Quick Installation Guide
AC3200 Wireless Tri-Band Gigabit Router
Connecting the Hardware
Turn on the modem, and
then wait about 2 minutes
for it to restart.
Connect the modem to the
Internet port on your router with
an Ethernet cable.
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the routers Internet port, then follow steps 5 and 6 to
complete the hardware connection.
Router
Modem
Power adapter
7106505511 REV1.0.2
Turn off the modem,
and remove the backup
battery if it has one.
2
Place the router horizontally and extend the
antennas to the maximum angle.
1
Note: For best performance, horizontal installation is recommended.
Antenna direction and position can affect performance in vertical
installation situations.
4
3
Turn on the router.
5
Verify that the following LEDs are on and stable before continuing with
the configuration.
6
Internet
On
Internet5GHz-1
On
5GHz-2
On
Power
On
2.4GHz
On
3200
Note:
1. If all the LEDs are off, press the LED On/Off button for about 1 second, then check the LEDs again.
2. If the 2.4GHz, 5GHz-1, and 5GHz-2 LEDs are off, press the Wi-Fi On/Off button for about 2 seconds, then
check the LEDs again in a few seconds.
Configuring the Router
Wired
Connect your computer to the router (wired or wireless).
1.
Configure the router via a web browser.
2.
Enter or in the address bar of a web http://tplinkwifi.net http://192.168.0.1
browser. Use for both username and password, and click .admin Login
Note: If the login page does not appear, please refer to FAQ > Q1.
A
Login
●●●●●
admin
http://tplinkwifi.net
Click , select your region and time zone, and click .Quick Setup Next
C
Internet Connection Type
Region and Time Zone
Wireless Settings
Summary
Connection Test
NextExit
(GMT-08:00) Pacific Time (US & Canada); Tijuana
Region:
Time Zone:
United States
Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. is fixed to the U.S. region.
Create a new username and password, then click Confirm. Re-login using the
new credentials.
B
HighMiddleLow
Confirm
User_123
New Username:
●●●●●●●●
New Password:
●●●●●●●●
Confirm New Password:
FAQ (Frequently Asked Questions)
Q1. What can I do if the login page does not appear?
A1. If the computer is set to a static or fixed IP address, change the setting to obtain an
IP address automatically.
A2. Verify that is correctly entered in the web browser. http://tplinkwifi.net
Alternatively, enter or in the web browser http://192.168.0.1 http://192.168.1.1
and press .Enter
A3. Use another web browser and try again.
A4. Reboot your router and try again.
A5. Disable then re-enable the network adapter being used.
Q2. What can I do if I cannot access the Internet?
A1. Check if the Internet is working properly by connecting a computer directly to the
modem using an Ethernet cable. If it is not, contact your Internet Service Provider.
A2. Log in to the Web Management page of the router, and go to the Basic > Network
Map page to check whether the Internet IP address is valid or not. If it is, please run
the Quick Setup again; otherwise, recheck the hardware connection.
A3. For cable modem users, log in to the Web Management page of the router. Go to
Advanced > Network > Internet > MAC Clone Use Current Computer MAC , click
Address and click Save, then reboot both the modem and the router.
A4. Reboot your router and try again.
Q3. How do I restore the router to its factory default settings?
A1. While the router is powered on, press and hold the button on the back for Reset
about 7 seconds until all LEDs go off, then release the button.
A2. Log in to the Web Management page of the router. Go to Advanced > System
tools > Backup & Restore Factory Restore, and click . The router will restore and
reboot automatically.
Q4. What can I do if I forgot my web management password?
A. Refer to FAQ > Q3 to reset the router, and then use the default (all admin
lowercase) for both username and password to log in.
Q5. What can I do if I forgot my wireless network password?
A1. The factory default Wireless Password/PIN is printed on the product label of the
router.
A2. Log in to the routers Web Management page, and go to to obtain Basic > Wireless
or reset your wireless password.
To learn more about the USB features, visit , http://tp-link.com/app/usb
or simply scan the QR code.
USB Features
Use the USB ports for media sharing, storage sharing and printer sharing across your
local network. You can also set up an FTP server to access your files remotely through
the Internet.
Remote Access
via FTP Server Media Sharing Local Storage
Sharing Printer Sharing
USB 2.0 Port USB 3.0 Port
Connect wirelessly by using the SSIDs
(network names) and Wireless Password
printed on the product label at the bottom
of the router.
You can also connect by pressing the WPS
button on the front panel of the router.
For more information about WPS, refer to
the User Guide at www.tp-link.com.
Wireless
Turn off the Wi-Fi on your computer and connect the devices as shown below.
©2015 TP-LINK
Confirm your settings, and then click .Save
F
Test your Internet connection, then click to complete the Quick Setup.Finish
G
Internet Connection Type
Region and Time Zone
Wireless Settings
Summary
Connection Test
FinishBack
Congratulations!
You have completed the Quick Setup process.
Click Test Internet Connection below, then click Finish.
Test Internet Connection
Use the default or change the wireless settings, and click .Next
Note: If you change the default SSID and password, please note the new wireless settings.
E
Internet Connection Type
Region and Time Zone
Wireless Settings
Summary
Connection Test
NextBack
Wireless Network (2.4GHz):
Wireless Network Name(SSID):
Password:
Please set the SSIDs and passwords for 2.4GHz and 5GHz wireless networks.
TP-LINK_7A30
12345670
Enable
Wireless Network (5GHz-1):
Wireless Network Name(SSID):
Password:
TP-LINK_7A30_5G_1
12345670
Enable
Wireless Network (5GHz-2):
Wireless Network Name(SSID):
Password:
TP-LINK_7A30_5G_2
12345670
Enable
Select your Internet Connection Type, or click if you are unsure of Auto Detect
what your connection type is. Click and follow the instructions.Next
D
Next
Auto Detect
Dynamic IP
Static IP
PPPoE
L2TP
PPTP
Note: If you are not sure which Internet Connection Type you have, use Auto Detect or contact
your Internet Service Provider (ISP) for assistance.
Back
Internet Connection Type Wireless Settings Connection Test
Region and Time Zone Summary
To conveniently manage your network, scan the QR code to
download the Tether app on your mobile device.
Tether App


Specyfikacje produktu

Marka: TP-Link
Kategoria: router
Model: AC3200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TP-Link AC3200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router TP-Link

TP-Link

TP-Link Archer AXE75 Instrukcja

14 Października 2024
TP-Link

TP-Link Archer BE805 Instrukcja

9 Października 2024
TP-Link

TP-Link ER605W Instrukcja

7 Października 2024
TP-Link

TP-Link VC321-G2h Instrukcja

7 Października 2024
TP-Link

TP-Link Archer BE230 Instrukcja

5 Października 2024
TP-Link

TP-Link Deco S4 Instrukcja

5 Października 2024
TP-Link

TP-Link Archer AX3200 Instrukcja

5 Października 2024
TP-Link

TP-Link Archer AX95 Instrukcja

4 Października 2024
TP-Link

TP-Link Archer MR550 Instrukcja

3 Października 2024
TP-Link

TP-Link Archer X95 Instrukcja

3 Października 2024

Instrukcje router

Najnowsze instrukcje dla router

Netgear

Netgear LB2120 4G LTE Instrukcja

15 Października 2024
Linksys

Linksys WRT3200ACM Instrukcja

15 Października 2024
D-Link

D-Link DAP-1360 Instrukcja

15 Października 2024
Linksys

Linksys EA8500 Instrukcja

13 Października 2024
Totolink

Totolink ND300 Instrukcja

12 Października 2024
ZyXEL

ZyXEL LTE 7460 Instrukcja

10 Października 2024
Netgear

Netgear Nighthawk R7200 Instrukcja

10 Października 2024
Netgear

Netgear FR114P Instrukcja

10 Października 2024
Asus

Asus RT-BE86U Instrukcja

9 Października 2024
D-Link

D-Link DWR-X1820 Instrukcja

9 Października 2024