Instrukcja obsługi Toshiba Satellite T135

Toshiba laptop Satellite T135

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Toshiba Satellite T135 (223 stron) w kategorii laptop. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/223

GMAD00218011

08/09

If you need assistance:

❖Toshiba’s Support Web site

pcsupport.toshiba.com

❖Toshiba Customer Support Center

Calling within the United States (800) 457-7777

Calling from outside the United States (949) 859-4273

For more information, see “If Something Goes Wrong” on

page 161 in this guide.

Satellite® T110/T130

Series User’s Guide

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects or

other reproductive harm. Wash hands after handling.

Model: Satellite® T110/T130 Series

Recordable and/or ReWritable Drive(s) and

Associated Software Warranty

The computer system you purchased may include Recordable and/or

ReWritable optical media drive(s) and associated software, among the most

advanced data storage technologies available. As with any new technology,

you must read and follow all set-up and usage instructions in the applicable

user guides and/or manuals enclosed or provided electronically. If you fail

to do so, this product may not function properly and you may lose data or

suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS,

INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT

WARRANT THAT OPERATION OF THE PRODUCT WILL BE

UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,

ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO

RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS,

PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR

REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING

FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE

POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data

stored on the hard disk or other storage devices as a precaution against possible

failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR

LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF

THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE

DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE

LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER

DAMAGE RESULTING THEREFROM. WHEN COPYING OR

TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM

WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR

TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE

FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

Critical Applications

The computer you have purchased is not designed for any “critical applications.”

“Critical applications” means life support systems, medical applications,

connections to implanted medical devices, commercial transportation, nuclear

facilities or systems or any other applications where product failure could lead to

injury to persons or loss of life or catastrophic property damage.

ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS

DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE

OF THE COMPUTER PRODUCTS IN ANY CRITICAL

APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A

CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME

FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, it may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

❖Reorient or relocate the receiving antenna.

❖Increase the separation between the equipment and receiver.

❖Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

❖Consult the dealer or an experienced radio/TV technician for help.

Only Peripherals complying with the FCC Class B limits may be attached to this

equipment. Operation with noncompliant peripherals or peripherals not

recommended by Toshiba is likely to result in interference to radio and TV reception.

Shielded cables must be used between the external devices and the computer's

ports. Changes or modifications made to this equipment not expressly approved by

Toshiba or parties authorized by Toshiba could void the user's authority to operate

the equipment.

NOTE

NOTENOTE

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

❖This device may not cause harmful interference.

❖This device must accept any interference received, including interference

that may cause undesired operation.

Contact either:

❖Toshiba’s Support Web site at pcsupport.toshiba.com.

❖Or call the Toshiba Customer Support Center:

Within the United States at (800) 457-7777

Outside the United States at (949) 859-4273

Industry Canada Requirement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003 du

Canada.

FCC requirements

The following information is pursuant to FCC CFR 47, Part 68 and refers to

internal modems.

This equipment complies with Part 68 of the FCC rules. On the bottom of this

equipment is a label that contains, among other information, the FCC registration

number and ringer equivalence number (REN) for this equipment. If requested,

the information must be provided to the telephone company.

The modem connects to the telephone line by means of a standard jack called the

USOC RJ11C.

A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC part 68 rules and

requirements adopted by the ACTA. It is designed to be connected to a

compatible modular jack that is also compliant.

The REN is used to determine the number of devices that may be connected to a

telephone line. Excessive RENs on a telephone line may result in the devices not

ringing in response to an incoming call. In most but not all areas, the sum of

RENs should not exceed five (5.0). To be certain of the number of devices that

may be connected to a line, as determined by the total RENs, contact the local

telephone company. For products approved after July 23, 2001, the REN for this

product is part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by the ## are the REN without a

decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is

separately shown on the label.

Connection to party line service is subject to state tariffs. Contact the state public

utility commission, public service commission or corporation commission for

information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can.

In order to do this, it may occasionally be necessary for them to make changes in

their equipment, operations or procedures. If these changes might affect your

service or the operation of your equipment, the telephone company will give you

notice, in writing, to allow you to make any changes necessary to maintain

uninterrupted service.

If Problems Arise

If this equipment causes harm to the telephone network, the telephone company

will notify you in advance that temporary discontinuance of service may be

required. But if advanced notice is not practical, the telephone company will

notify the customer as soon as possible. Also, you will be advised of your right to

file a complaint with the FCC if you believe it is necessary.

If trouble is experienced with this equipment, for repair or standard limited

warranty information, please contact Toshiba Corporation, Toshiba America

Information Systems, Inc. or an authorized representative of Toshiba, or the

Toshiba Customer Support Center within the United States at (800) 457-7777 or

Outside the United States at (949) 859-4273. If the equipment is causing harm to

the telephone network, the telephone company may request that you disconnect

the equipment until the problem is resolved.

Disconnection

If you should ever decide to permanently disconnect your modem from its

present line, please call the telephone company and let them know of this change.

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any

person to use a computer or other electronic device, including Fax machines, to

send any message unless such message clearly contains in a margin at the top or

bottom of each transmitted page or on the first page of the transmission, the date

and time it is sent and an identification of the business or other entity, or other

individual sending the message and the telephone number of the sending

machine or such business, other entity, or individual. (The telephone number

provided may not be a 900 number or any other number for which charges

exceed local or long-distance transmission charges.)

In order to program this information into your fax transmission, refer to the fax

software instructions installed on this computer.

Alarm Equipment

If your home has specially wired alarm equipment connected to the telephone

line, ensure the installation of this equipment does not disable your alarm

equipment. If you have questions about what will disable alarm equipment,

consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment

1NOTICE: The Industry Canada label identifies certified equipment.

This certification means that the equipment meets certain

telecommunications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equipment

Technical Requirements document(s). The Department does not

guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to

be connected to the facilities of the local telecommunications company. The

equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions

may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative

designated by the supplier. Any repairs or alterations made by the user to

this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic water

pipe system, if present, are connected together. This precaution may be

particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves,

but should contact the spection authority, or appropriate electric in

electrician, as appropriate.

2The user manual of analog equipment must contain the equipment’s

Ringer Equivalence Number (REN) and an explanation notice similar

to the following:

The Ringer Equivalence Number (REN) of this device can be found on the

label affixed to your computer.

NOTICE: The Ringer Equivalence Number (REN) assigned to each

terminal device provides an indication of the maximum number of

terminals allowed to be connected to a telephone interface. The termination

on an interface may consist of any combination of devices subject only to

the requirement that the sum of the Ringer Equivalence Numbers of all the

devices does not exceed 5.

3The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be

interoperable with any wireless LAN product that is based on Direct Sequence

Spread Spectrum (DSSS) radio technology, and is compliant to:

❖The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined

and approved by the Institute of Electrical and Electronics Engineers.

❖The Wireless Fidelity (Wi-Fi

®) certification as defined by the Wi-Fi Alliance.

The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

Bluetooth® and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth and

Wireless LAN devices simultaneously, you may occasionally experience a

less than optimal network performance or even lose your network

connection.

If you should experience any such problem, immediately turn off your

Bluetooth or Wireless LAN device.

Please contact Toshiba computer product support on Web site

http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or

pcsupport.toshiba.com in the United States for more information.

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. FCC requires this product to be used indoors for

frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful

interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35

GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause

interference with and/or damage this device.

The above caution applies to products that operate with an 802.11a radio

device.

NOTE

NOTENOTE

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency

electromagnetic energy. The level of energy emitted by Wireless LAN devices

however is far much less than the electromagnetic energy emitted by wireless

devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio

frequency safety standards and recommendations, TOSHIBA believes Wireless

LAN is safe for use by consumers. These standards and recommendations reflect

the consensus of the scientific community and result from deliberations of panels

and committees of scientists who continually review and interpret the extensive

research literature.

In some situations or environments, the use of Wireless LAN may be restricted

by the proprietor of the building or responsible representatives of the

organization. These situations may for example include:

❖Using the Wireless LAN equipment on board airplanes, or

❖In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a

specific organization or environment (e.g. airports), you are encouraged to ask for

authorization to use the Wireless LAN device prior to turning on the equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is

far below the FCC radio frequency exposure limits. Nevertheless, the

TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that

the potential for human contact during normal operation is minimized. The

antenna(s) used for this transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Regulatory Information

The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict

accordance with the manufacturer’s instructions as described in the user

documentation that comes with the product. This device complies with the

following radio frequency and safety standards.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located

or pointed such that it does not emit RF field in excess of Health Canada

limits for the general population; consult Safety Code 6, obtainable from

Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be

co-located with any other transmitter that has not been tested with this

device.

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of this device.

L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne

doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à

accepter tout brouillage radioélectrique reçu, même s’il est susceptible de

compromettre son fonctionnement.

The term “IC” before the equipment certification number only signifies that the

Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended to be

operated indoors and away from windows to provide maximum shielding.

Equipment (or its transmit antenna) that is installed outdoors is subject to

licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l’objet

d’une licence, il doit etre utilize a l’interieur et devrait etre place loin des fenetres

afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne

d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence.

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. Industry Canada requires this product to be used

indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for

harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35

GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause

interference with and/or damage this device.

The above caution applies to products that operate with an 802.11a radio

device.

NOTE

NOTENOTE

VCCI Class B Information

Modem Warning Notice

Conformity Statement

The equipment has been approved to [Commission Decision “CTR21”] for pan-

European single terminal connection to the Public Switched Telephone Network

(PSTN).

However, due to differences between the individual PSTNs provided in different

countries/regions the approval does not, of itself, give an unconditional assurance

of successful operation on every PSTN network termination point.

In the event of problems, y pment supplier in the first ou should contact your equi

instance.

Taiwan

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication laws and

regulations.

Low power radio frequency electric machinery shall resist against interference

from legal communications or from industrial, scientific and medical radio

emission electric machinery.

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the

frequency, increase the power or change the features and functions of the

original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

aviation safety and interfere with legal communications. In the event

interference is caused, the use of such electric machinery shall be

immediately discontinued. Operation of such products can be resumed

only when they are modified and can no longer cause interference.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second

generation low-power data communication systems such as this equipment

overlaps that of mobile object identification systems (premises radio station and

specified low-power radio station).

1. Sticker

Please put the following sticker on devices incorporating this product.

2. Indication

The indication shown below appears on this equipment.

12.4: This equipment uses a frequency of 2.4 GHz.

2DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

3The interference range of this equipment is less than 40m.

4This equipment uses a frequency bandwidth from

2,400 MHz to 2,483.5 MHz.

It is possible to avoid the band of mobile object identification systems.

The indication shown below appears on this equipment.

12.4: This equipment uses a frequency of 2.4 GHz.

2FH: This equipment uses FH-SS modulation.

3The interference range of this equipment is less than 10m.

The frequency bandwidth of this equipment may operate within the

same range as industrial devices, scientific devices, medical

devices, microwave ovens, licensed radio stations and non-licensed

specified low-power radio stations for mobile object identification

systems (RFID) used in factory product lines (Other Radio Stations).

1. Before using this equipment, ensure that it does not interfere with

any of the equipment listed above.

2. If this equipment causes RF interference to other radio stations,

promptly change the frequency being used, change the location

of use, or turn off the source of emissions.

3. Contact TOSHIBA Direct PC if you have problems with interference

caused by this product to Other Radio Stations.

2.4DSOF4

(1)

(2) (3)

(4)

2.4FH1

(1) (2) (3)

(4)

4This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz.

3. TOSHIBA Direct PC

Monday – Friday: 10:00 – 17:00

Toll Free Tel: 0120-15-1048

Direct Dial: 03-3457-4850

Fax: 03-3457-4868

Device Authorization

This device obtains the Technical Regulation Conformity Certification and

the Technical Conditions Compliance Approval, and it belongs to the

device class of radio equipment of low-power data communication system

radio station stipulated in the Radio Law and the Telecommunications

Business Law of Japan.

The name of the radio equipment: refer to the equipment label provided on

the computer

Approved by both the JAPAN APPROVALS INSTITUTE FOR

TELECOMMUNICATIONS EQUIPMENT and the TELECOM

ENGINEERING CENTER

The following restrictions apply:

❖Do not disassemble or modify the device.

❖Do not install the embedded wireless module into other device.

❖5.17 GHz to 5.23 GHz for indoor use only.

Radio Approvals for Wireless Devices

The following information is dependent on what type of wireless device is in

your computer. Not all devices are available on all models.

Approved Countries/Regions for the Intel® Wireless Wi-Fi®

Link 5100/5300 Series

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

NOTE

NOTENOTE

Andorra Argentina CNC:

533AN_HMW: “CNC C-6367”

533AN_MMW: “CNC C-6366”

512AN_HMW: “CNC C-6373”

512AN_MMW: “CNC C-6374”

Australia

Austria Azerbaijan Bahrain

Belgium Bermuda Bosnia

Brazil Bulgaria Caicos Islands

Cambodia Canada Cayman Islands

Chile China Colombia

Costa Rica Croatia Curacao, Netherlands

Antilles

Cyprus Czech Republic Denmark

Dominican Republic Ecuador El Salvador

Egypt Estonia Falkland Islands

Finland France French Guinea

French Polynesia Germany Ghana

Gibraltar Greece Guadeloupe

Guam Guatemala Herzegovina

Honduras Hong Kong Hungary

Iceland India Indonesia

Ireland Israel Italy

Japan Jordan Kenya

Kuwait Latvia Lebanon

Liechtenstein Lithuania Luxemburg

Malawi Malaysia Malta

Martinique Mayotte Mexico

Monaco Montenegro Montserrat

Morocco Netherlands New Caledonia

New Zealand Nicaragua Norway

Oman Pakistan Panama

Paraguay Peru Philippines

Poland Portugal Puerto Rico

Qatar Réunion Romania

Russia Saint Martin Saipan

San Marino Saudi Arabia Serbia

Singapore Slovakia Slovenia

South Africa South Korea Spain

Sri Lanka Sweden Switzerland

Approved Countries/Regions for the Atheros® Wireless Wi-Fi®

Link AR5B95 Series

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

Tahiti Taiwan Turkey

Turk Islands Ukraine UAE

(United Arab Emirates)

United Kingdom Uruguay USA

Vatican Venezuela Vietnam

Virgin Islands Zimbabwe

Albania Argentina CNC:

693 GI/2007

3655 GI/2007

Australia

Austria Azerbaijan Bahrain

Bangladesh Belgium Bolivia

Bosnia Brazil Brunei

Bulgaria Cambodia Canada

Chile China Colombia

Croatia Cyprus Czech Republic

Denmark Dominican Republic Ecuador

Egypt El Salvador Estonia

Finland France Germany

Ghana Greece Guatemala

Herzegovina Honduras Hong Kong

Hungary Iceland India

Indonesia Iraq Ireland

Italy Jamaica Japan

Jordan Kazakhstan Kenya

Kuwait Kyrgyzstan Latvia

Lebanon Lesotho Liechtenstein

Lithuania Luxembourg Macedonia

Malaysia Malta Mexico

Monaco Montenegro Mozambique

Nambia Nepal Netherlands

New Zealand Nicaragua Nigeria

Norway Oman Pakistan

Panama Papua New Guinea Paraguay

Peru Philippines Poland

Europe - Restrictions for use of 2.4 GHz Frequencies in

European Community Countries

Portugal Puerto Rico Qatar

Romania Russia Saudi Arabia

Senegal Serbia Singapore

Slovak Republic Slovenia South Africa

South Korea Spain Sri Lanka

Sweden Switzerland Taiwan

Thailand Turkey UAE (United Arab

Emirates)

Ukraine United Kingdom Uruguay

USA Venezuela Vietnam

Yemen Zimbabwe

België/

Belgique:

For private usage outside buildings across public grounds over less than

300m no special registration with IBPT/BIPT is required. Registration to

IBPT/BIPT is required for private usage outside buildings across public

grounds over more than 300m. For registration and license please

contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over afstand

kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik

over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig.

Voor registratie of licentie kunt u contact opnemen met BIPT.

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-

dessus d’un espace public, aucun enregistrement n’est nécessaire pour

une distance de moins de 300m. Pour une distance supérieure à 300m un

enregistrement auprès de l’IBPT est requise. Pour les enregistrements et

licences, veuillez contacter l’IBPT.

Deutschland: License required for outdoor installations. Check with reseller for

procedure to follow.

Anmeldung im Outdoor-Bereich notwendig, aber nicht

genehmigungspflichtig. Bitte mit Händler die Vorgehensweise

abstimmen.

France: Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454

MHz respectively) may be used outdoors in France. Please contact

A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz

respectivement) doivent être utilisés endroits extérieur en France. Vous

pouvez contacter l’Autorité de Régulation des Télécommunications

(http://www.art-telecom.fr) pour la procédure à suivre.

Italia: License required for indoor use. Use with outdoor installations not

allowed.

Europe - Restrictions for Use of 5 GHz Frequencies in

European Community Countries

O: allowed x: forbidden

❖To remain in conformance with European spectrum usage laws for Wireless

LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply.

The user should use the wireless LAN utility to check the current channel of

operation. If operation is occurring outside of the allowable frequencies as

listed above, the user must cease operating the Wireless LAN at that

location and consult the local technical support staff responsible for the

wireless network.

❖The 5 GHz Turbo mode feature is not allowed for operation in any

European Community country.

❖This device must not be operated in ad-hoc mode using channels in the

5 GHz bands in the European Community. Ad-hoc mode provides a direct

communication between two client devices without a Wireless LAN Access

Point.

❖This device must be used with Access Points that have employed and

activated a radar detection feature required for European Community

operation in the 5 GHz bands. This device will operate under the control of

the Access Point in order to avoid operating on a channel occupied by any

È necessaria la concessione ministeriale anche per l’uso interno.

Verificare con i rivenditori la procedura da seguire.

Nederland: License required for outdoor installations. Check with reseller for

procedure to follow.

Licentie verplicht voor gebruik met buitenantennes. Neem contact op

met verkoper voor juiste procedure.

European Community

Countries

5150-5250 MHz

Channels: 36, 40, 44,

Indoor Only

5250-5350 MHz

Channels: 52, 56, 60,

Indoor Only

5470-5725 MHz

Channels: 100, 104, 108, 112,

116, 120, 124, 128, 132, 136, 140

Indoor/Outdoor

Austria O x x

Belgium, France,

Switzerland/Liechtenstein

O O x

Denmark, Finland,

Germany, Greece,

Ireland, Italy,

Luxembourg,

Netherlands, Norway,

Portugal, Sweden, UK

O O O

Iceland, Spain O O O

radar system in the area. The presence of nearby radar operation may result

in temporary interruption of operation of this device. The Access Point’s

radar detection feature will automatically restart operation on a channel free

of radar. You may consult with the local technical support staff responsible

for the wireless network to ensure the Access Point device(s) are properly

configured for European Community operation.

Approved Countries/Regions for the Realtek® RTL8192E

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following table.

Albania Argentina Australia

Austria Azerbaijan Bahrain

Bangladesh Belgium Bolivia

Bosnia Brazil Bulgaria

Cambodia Canada Chile

China Colombia Costa Rica

Croatia Cyprus Czech Republic

Denmark Dominican Republic Ecuador

Egypt El Salvador Estonia

Finland France Germany

Ghana Greece Herzegovina

Honduras Hong Kong Hungary

Iceland India Indonesia

Ireland Israel Italy

Japan Jordan Kazakhstan

Kenya Kuwait Kyrgyzstan

Latvia Lebanon Lesotho

Liechtenstein Lithuania Luxembourg

Macedonia Malaysia Malta

Mexico Monaco Morocco

Mozambique Netherlands New Zealand

Nicaragua Norway Oman

Pakistan Panama Papua New Guinea

Paraguay Peru Philippines

Poland Portugal Puerto Rico

Qatar Romania Saudi Arabia

Serbia Singapore Slovak Republic

Slovenia South Africa South Korea

Approved Countries/Regions for the Realtek® RTL8191SE

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following table.

Spain Sri Lanka Sweden

Switzerland Taiwan Thailand

Trinidad Turkey UAE (United Arab

Emirates)

United Kingdom Uruguay USA

Venezuela Vietnam Zimbabwe

Albania Argentina Australia

Austria Azerbaijan Bahrain

Bangladesh Belgium Bolivia

Bosnia Brazil Bulgaria

Cambodia Canada Chile

China Colombia Costa Rica

Croatia Cyprus Czech Republic

Denmark Dominican Republic Ecuador

Egypt El Salvador Estonia

Finland France Ghana

Germany Greece Herzegovina

Hong Kong Hungary Iceland

India Indonesia Ireland

Israel Italy Jamaica

Japan Jordan Kazakhstan

Kenya Kuwait Kyrgyzstan

Latvia Lebanon Liechtenstein

Lithuania Luxembourg Macedonia

Malaysia Malta Mexico

Monaco Morocco Mozambique

Netherlands Antilles Netherlands New Zealand

Norway Oman Pakistan

Panama Papua New Guinea Paraguay

Peru Philippines Poland

Portugal Puerto Rico Qatar

Romania Russia Saudi Arabia

Approved Countries/Regions for the Realtek® RTL8187B

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

Serbia Singapore Slovak Republic

Slovenia South Africa South Korea

Spain Sri Lanka Sweden

Switzerland Taiwan Thailand

Trinidad Tunisia Turkey

UAE (United Arab

Emirates)

Ukraine United Kingdom

Uruguay USA Venezuela

Vietnam Zimbabwe

Albania Algeria Argentina

Australia Austria Azerbaijan

Bahrain Bangladesh Belgium

Bolivia Bosnia Brazil

Brunei Bulgaria Cambodia

Canada Chile China

Colombia Costa Rica Croatia

Cyprus Czech Republic Denmark

Dominican Republic Ecuador Egypt

El Salvador Estonia Finland

France Germany Ghana

Greece Guatemala Herzegovina

Honduras Hong Kong Hungary

Iceland India Indonesia

Ireland Israel Italy

Japan - Jate Japan - Teleco Jordan

Kazakhstan Kenya Kyrgyzstan

Kuwait Latvia Lebanon

Lesotho Liechtenstein Lithuania

Luxembourg Macedonia Malaysia

Malta Mexico Monaco

Morocco Mozambique Netherlands

New Zealand Nicaragua Nigeria

Norway Oman Pakistan

Panama Papua New Guinea Paraguay

Approved Countries/Regions for use for the

Intel® PRO/Wireless 3945ABG Network Connection

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

An adhoc mode is available in Ch1-Ch11(802.11b/g), An Infrastructure

mode is available in Ch1-Ch11 (802.11b/g)

Ch36,40,44,48,52,56,60,64,149,153,157,161,165 (802.11a) Wake-up on

wireless lan function is not available in battery mode.

802.11b/g (2.4 GHz)

802.11a (5 GHz)

Peru Philippines Poland

Portugal Puerto Rico Qatar

Romania Russia Saudi Arabia

Senegal Serbia and Montenegro Singapore

Slovak Republic Slovenia South Africa

South Korea Spain Sri Lanka

Sweden Switzerland Taiwan

Thailand Turkey Ukraine

UAE (United Arab

Emirates)

United Kingdom Uruguay

USA Venezuela Vietnam

Yemen Zimbabwe

Australia Brunei Canada

Chile Hong Kong India

Indonesia Malaysia Mexico

New Zealand Saudi Arabia Taiwan

USA Venezuela Vietnam

Australia Brunei Canada

Chile Hong Kong India

Indonesia Malaysia Mexico

New Zealand Saudi Arabia Taiwan

USA Venezuela Vietnam

NOTE

NOTENOTE

Approved Countries/Regions for the Intel® Wireless Wi-Fi®

Link 4965AGN

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

An adhoc mode is available in Ch1-Ch11(802.11b/g), An Infrastructure

mode is available in Ch1-Ch11 (802.11b/g)

Ch36,40,44,48,52,56,60,64,149,153,157,161,165 (802.11a).

11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g

and 802.11n respectively. The IEEE 802.11n specification has not been finalized

and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN

Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n

specification. An adapter with 11a/b, 11a/b/g, or 11a/b/g/n can communicate on

any of its supported formats; the actual connection will be based on the access

point to which it connects.

Connection compatibility with the wireless equipment in Draft 11n mode is not

guaranteed.

The Draft 11n function cannot be used with WEP/TKIP. Draft 11n mode can be

used only with WPA-PSK(AES) mode or no security mode.

Antigua Argentina Aruba

Bahamas Barbados Belize

Bermuda Bolivia Canada

Chile Cayman Islands Colombia

Costa Rica Curacao Dominican Republic

Ecuador El Salvador Grenada

Guadeloupe Guyana Haiti

Honduras Jamaica Martinique

Netherlands Antilles Nicaragua Panama

Paraguay Peru Puerto Rico

St. Kitts St. Maarten Suriname

Trinidad and Tobago Uruguay USA

US Virgin Islands Venezuela

NOTE

NOTENOTE

Bluetooth® Wireless Technology Interoperability

Bluetooth® Cards from TOSHIBA are designed to be interoperable with any

product with Bluetooth wireless technology that is based on Frequency Hopping

Spread Spectrum (FHSS) radio technology, and is compliant to:

❖Bluetooth Specification as defined and approved by The Bluetooth Special

Interest Group.

❖Logo certification with Bluetooth wireless technology as defined by The

Bluetooth Special Interest Group.

Bluetooth wireless technology is a new innovative technology, and TOSHIBA

has not confirmed compatibility of its Bluetooth products with all computers

and/or equipment using Bluetooth wireless technology other than TOSHIBA

portable computers.

Always use Bluetooth cards from TOSHIBA in order to enable wireless

networks over two or more (up to a total of seven) TOSHIBA portable

computers using these cards. Please contact TOSHIBA computer product

support on Web site http://www.toshiba-europe.com/computers/tnt/

bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for

more information.

When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless

LAN devices, Bluetooth transmissions might slow down or cause errors. If

you detect certain interference while you use Bluetooth cards from TOSHIBA,

always change the frequency, move your computer to the area outside of the

interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards

or more) or stop transmitting from your computer. Please contact TOSHIBA

computer product support on Web site http://www.toshiba-europe.com/

computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the

United States for more information.

Bluetooth and Wireless LAN devices operate within the same radio frequency

range and may interfere with one another. If you use Bluetooth and Wireless

LAN devices simultaneously, you may occasionally experience a less than

optimal network performance or even lose your network connection. If you

should experience any such problem, immediately turn off either one of your

Bluetooth or Wireless LAN. Please contact Toshiba computer product

support on Web site http://www.toshiba-europe.com/computers/tnt/

bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for

more information.

Approved Countries/Regions for use (Bluetooth® wireless

technology)

Bluetooth® Card from Toshiba equipment is approved to the radio standard by the

countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following

table.

Bluetooth® Wireless Technology and Your Health

The products with Bluetooth

® wireless technology, like other radio devices, emit

radio frequency electromagnetic energy. The level of energy emitted by devices

with Bluetooth wireless technology however is much less than the

electromagnetic energy emitted by wireless devices such as mobile phones.

Because products with Bluetooth wireless technology operate within the

guidelines found in radio frequency safety standards and recommendations,

TOSHIBA believes Bluetooth wireless technology is safe for use by consumers.

These standards and recommendations reflect the consensus of the scientific

community and result from deliberations of panels and committees of scientists

who continually review and interpret the extensive research literature.

Argentina Australia Austria

Belgium Bulgaria Canada

Chile China Cyprus

Czech Republic Denmark Egypt

Estonia Finland France

Germany Greece Hong Kong

Hungary Iceland Ireland

Italy Japan Jordan

Korea Kuwait Latvia

Lebanon Liechtenstein Lithuania

Luxembourg Malta Netherlands

New Zealand Norway Oman

Peru Philippines Poland

Portugal Singapore Slovakia

Slovenia Spain Sweden

Switzerland Thailand UK

Uruguay USA Venezuela

In some situations or environments, the use of Bluetooth wireless technology

may be restricted by the proprietor of the building or responsible representatives

of the organization. These situations may for example include:

❖Using the equipment with Bluetooth wireless technology on board

airplanes, or

❖In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a

specific organization or environment (e.g. airports), you are encouraged to ask for

authorization to use the device with Bluetooth wireless technology prior to

turning on the equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth Card from TOSHIBA is far below

the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card

from TOSHIBA shall be used in such a manner that the potential for human

contact during normal operation is minimized.

Regulatory statements

This product complies with any mandatory product specification in any country/

region where the product is sold. In addition, the product complies with the

following:

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has been

provided with the CE mark accordingly.

Canada — Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Taiwan

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the

frequency, increase the power or change the features and functions of the

original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

aviation safety and interfere with legal communications. In the event

interference is caused, the use of such electric machinery shall be

immediately discontinued. Operation of such products can be resumed

only when they are modified and can no longer cause interference.

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication laws and

regulations.

Low power radio frequency electric machinery shall resist against interference

from legal communications or from industrial, scientific and medical radio

emission electric machinery.

This guide is copyrighted by Toshiba America Information Systems, Inc. with all

rights reserved. Under the copyright laws, this guide cannot be reproduced in any

form without the prior written permission of Toshiba. No patent liability is

assumed, however, with respect to the use of the information contained herein.

Export Administration Regulation

This document contains technical data that may be controlled under the U.S.

Export Administration Regulations, and may be subject to the approval of the

U.S. Department of Commerce prior to export. Any export, directly or indirectly,

in contravention of the U.S. Export Administration Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to any

product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA

INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO

WARRANTY WITH REGARD TO THIS MANUAL OR ANY

OTHER INFORMATION CONTAINED HEREIN AND HEREBY

EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR

PURPOSE WITH REGARD TO ANY OF THE FOREGOING.

TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES

INCURRED DIRECTLY OR INDIRECTLY FROM ANY

TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS

CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN

THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL

TOSHIBA BE LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,

WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,

ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL

OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE

USE THEREOF.

Trademarks

Satellite, ConfigFree and eco utility are either registered trademarks or

trademarks of Toshiba America Information Systems, Inc. and/or Toshiba

Corporation.

Adobe and Photoshop are either registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or other countries.

Atheros is a registered trademark of Atheros Communications, Inc.

Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any

use of such marks by Toshiba is under license. Other trademarks and trade names

are those of their respective owners.

DirectX, Active Desktop, DirectShow, and Windows Media are registered

trademarks of Microsoft Corporation.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered

trademarks of Intel Corporation or its subsidiaries in the United States and other

countries.

Memory Stick, Memory Stick PRO, and Memory Stick Duo are trademarks or

registered trademarks of Sony Corporation.

Microsoft, Outlook, and Windows are either registered trademarks or trademarks

of Microsoft Corporation in the United States and/or other countries.

MultiMediaCard and MMC are registered trademarks of MultiMediaCard

Association.

Secure Digital and SD are trademarks of SD Card Association.

TouchPad is a trademark of Synaptics, Inc.

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

xD-Picture Card is a trademark of Fuji Photo Film, Co., Ltd.

All other brand and product names are trademarks or registered trademarks of

their respective companies.

Computer Disposal Information

The LCD display lamp in this product may contain mercury. Disposal of this

product may be regulated due to environmental considerations. For disposal,

reuse or recycling information, please contact your local government or the

Electronic Industries Alliance at www.eiae.org.

As part of Toshiba’s commitment to preserving the environment, Toshiba

supports various trade-in and recycling programs. For details, please visit

www.laptops.toshiba.com/green.

Contents

Introduction................................................................................ 35

This guide ...............................................................37

Safety icons ............................................................38

Other icons used...............................................38

Your computer’s features and specifications ....39

Other documentation ..............................................39

Service options .......................................................39

Chapter 1: Getting Started....................... ............. 40.....................

Selecting a place to work ........................................40

Setting up a work environment .........................40

Keeping yourself comfortable ...........................41

Precautions.......................................................41

Important information on your computer’s

cooling fan ..................................................43

Setting up your computer .......................................43

Connecting to a power source ................................44

Charging the main battery.......................................46

Using the computer for the first time ......................47

Opening the display panel .................................47

Contents

Turning on the power .......................................48

Setting up your software...................................48

Registering your computer with Toshiba ................49

Adding optional external devices.............................49

Adding memory (optional)......................................50

Installing a memory module .............................50

Removing a memory module............................56

Checking total memory .....................................57

Recovering the Internal Storage Drive ....................58

Recovering to out-of-box state

(recommended recovery method)...............59

Recovering to a custom size partition...............61

Recovering without changing the

internal storage drive partitions ..................64

Creating recovery DVDs/media .........................66

Restoring from recovery DVDs/media ..............67

Erasing the Internal Storage Drive ..........................69

Checking the internal storage drive operating

status................................................................71

Installing drivers and applications.....................71

Using the TouchPad™.............................................71

Adjusting TouchPad™ settings .........................75

Disabling or enabling the TouchPad™ ..............75

Using external display devices ................................76

Connecting the display device...........................76

Directing the display output when you

turn on the computer ..................................77

Adjusting the quality of the external display......78

Using an external keyboard.....................................78

Using a mouse........................................................78

Connecting a printer ...............................................79

Setting up a printer ...........................................80

Turning off the computer ........................................80

Options for turning off the computer ................81

Using the Shut down command........................83

Using and configuring Hibernation mode .........85

30 Contents

Using and configuring Sleep mode ...................87

Closing the display panel ..................................90

Customizing your computer’s settings....................90

Caring for your computer........................................90

Cleaning the computer......................................90

Moving the computer........................................91

Using a computer lock ......................................91

Chapter 2: Learning the Basics.................................................92

Computing tips .......................................................92

Using the keyboard .................................................94

Character keys .................................................94

Making your keyboard emulate a full-size

keyboard .....................................................94

Ctrl, Fn, and Alt keys .........................................95

Function keys....................................................95

Special Windows® keys ...................................95

Overlay keys .....................................................96

Starting a program..................................................97

Starting a program from the Start menu...........97

Starting a program from Windows®

Explorer ......................................................98

Starting a program using the Search

programs and files field ..............................99

Saving your work....................................................99

Printing your work ................................................101

Backing up your work ...........................................102

Restoring your work .......................................103

Toshiba’s online resources ...................................103

Chapter 3: Mobile Computing.................................................104

Toshiba’s energy-saver design..............................104

Running the computer on battery power ..............105

Battery Notice .................................................105

Power management ........................................106

Using additional batteries ...............................106

Contents

Charging batteries.................................................106

Charging the main battery...............................106

Charging the RTC battery................................107

Monitoring main battery power.............................108

Determining remaining battery power.............110

What to do when the main battery runs low ...110

Setting battery notifications ............................111

Conserving battery power ..............................111

Power Plans....................................................112

Using a hot key to set the Power Plan.............113

Using the TOSHIBA eco power plan......................114

Changing the main battery ....................................114

Removing the battery from the computer .......115

Inserting a charged battery .............................116

Taking care of your battery ...................................117

Safety precautions ..........................................117

Maintaining your battery .................................118

Disposing of used batteries ..................................119

Traveling tips ........................................................120

Chapter 4: Exploring Your Computer’s Features...................121

Exploring the desktop ...........................................121

Finding your way around the desktop .............122

Setting up for communications.............................124

Connecting your computer to a network.........124

An overview of using the Internet .........................125

The Internet ....................................................125

The World Wide Web .....................................125

Internet Service Providers ..............................126

Connecting to the Internet .............................126

Surfing the Internet.........................................126

Internet features..............................................127

Uploading to, and downloading files

from, the Internet .....................................128

Exploring audio features .......................................128

Recording sounds...........................................128

32 Contents

Using external speakers or headphones..........129

Using the Web Camera .........................................129

Using the Memory Card Reader............................130

Inserting memory media.................................130

Removing memory media...............................131

Chapter 5: Utilities....................................................................132

TOSHIBA Assist ....................................................133

Connect...........................................................134

Secure.............................................................135

Protect & Fix...................................................136

Optimize..........................................................137

TOSHIBA Application Installer...............................138

Setting passwords ................................................139

Using an instant password..............................139

Using a supervisor password..........................140

Using a user password ...................................141

Deleting a user password................................142

TOSHIBA Face Recognition Utility.........................143

TOSHIBA PC Diagnostic Tool Utility......................144

TOSHIBA HDD Protection Utility ...........................145

TOSHIBA SD™ Memory Card Format Utility .........146

Mouse Utility ........................................................147

TOSHIBA Hardware Setup.....................................148

USB Sleep and Charge Utility................................150

Starting the USB Sleep and Charge Utility.......150

USB Sleep and Charge ....................................150

Enabling USB Sleep and Charge .....................152

Power supply mode settings...........................152

Battery settings...............................................152

TOSHIBA Zooming Utility......................................153

TOSHIBA Accessibility ..........................................154

TOSHIBA eco Utility™ ...........................................155

TOSHIBA Service Station ......................................156

TOSHIBA PC Health Monitor.................................156

ConfigFree®...........................................................157

Contents

Getting Started................................................157

ConfigFree® Utilities........................................158

Chapter 6: If Something Goes Wrong...................................161

Problems that are easy to fix ................................161

Problems when you turn on the computer............162

The Windows® operating system is not

working...........................................................165

Using Startup options to fix problems ............165

Internet problems ...........................................166

The Windows® operating system can

help you ....................................................167

Fixing a problem with Device Manager .................167

Checking device properties .............................167

Memory problems ................................................168

Power and the batteries ........................................169

Keyboard problems...............................................170

Display problems ..................................................171

Disk or storage drive problems.............................173

Error-checking ................................................173

Optical drive (optional) problems..........................174

Sound system problems .......................................175

Printer problems...................................................176

Wireless networking problems..............................177

Develop good computing habits ...........................178

Data and system configuration backup in

the Windows® operating system...............179

If you need further assistance...............................184

Before you contact Toshiba ............................184

Contacting Toshiba .........................................184

Other Toshiba Internet Web sites..........................185

Toshiba’s worldwide offices..................................185

Appendix A: Intel® Display Power Saving Technology.........187

Appendix B: Hot Keys/TOSHIBA Cards.................................188

Hot Key Cards .......................................................188

34 Contents

Using the Hot Key Cards .................................189

Application Cards..................................................190

Using the Application Cards............................191

Card Case........................................................191

Hot key functions..................................................192

Volume Mute ..................................................192

Lock (Instant security)....................................193

Power plan .....................................................194

Sleep mode.....................................................195

Hibernation mode ...........................................196

Output (Display switch) .................................197

Display brightness ..........................................198

Disabling or enabling wireless devices............199

Disabling or enabling the TouchPad™ ............200

Zoom (Display resolution) ..............................201

Keyboard hot key functions ...........................202

Appendix C: Power Cord/Cable Connectors..........................203

Glossary....................................................................................204

Index..........................................................................................218

Introduction

Welcome to the world of powerful, portable, multimedia

computing. With your Toshiba computer, your work and

entertainment can accompany you wherever you go.

Your computer model may be ENERGY STAR

® qualified. If the

model you purchased is qualified, it is labeled with the ENERGY

STAR® logo on the computer and the following information

applies.

Toshiba is a partner in the Environmental Protection Agency’s

(EPA) ENERGY STAR® Program and has designed this computer

to meet the latest ENERGY STAR® guidelines for energy

efficiency. Your computer ships with the power management

options preset to a configuration that will provide the most stable

operating environment and optimum system performance for both

AC power and battery modes.

To conserve energy, your computer is set to enter the low-power

Sleep mode which shuts down the system and display within 15

minutes of inactivity in AC power mode. We recommend that you

leave this and other energy saving features active, so that your

computer will operate at its maximum energy efficiency. You can

wake the computer from Sleep mode by pressing the power button.

See the “Mobile Computing” section of the Toshiba User’s Guide

for more information on using power management settings to

conserve computer energy.

36 Introduction

According to the EPA, a computer meeting the new ENERGY

STAR® specifications will use between 20% and 50% less energy

depending on how it is used. If all U.S. household and businesses

replaced old computers with new ENERGY STAR

® qualified

models, we would save more than $1.8 billion in energy costs over

the next five years and avoid greenhouse gas emissions equivalent

to more than 2.7 million cars.

If every computer purchased by businesses next year met the new

ENERGY STAR® requirements, businesses would save more than

$210 million over the lifetime of those models. That is equivalent to

lighting 120 million square feet of U.S. commercial building space

each year.

During 2006 Americans, with the help of ENERGY STAR

®, saved

about $14 billion dollars on their utility bills and avoided

greenhouse gas emissions equivalent to those from 25 million

vehicles.

Visit http://www.energystar.gov or

http://www.energystar.gov/powermanagement for more

information regarding the ENERGY STAR

® Program.

This computer is compatible with European Union Directive

2002/95/EC, Restriction of the use of certain Hazardous Substances

in electrical and electronic equipment (RoHS), which restricts use of

lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.

Toshiba requires its computer component suppliers to meet RoHS

requirements and verifies its suppliers’ commitment to meeting

RoHS requirements by conducting component sampling inspections

during the product design approval process.

Certain Microsoft® software product(s) included with this computer

may use technological measures for copy protection. IN SUCH

EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO

NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION

PROCEDURES. Product activation procedures and Microsoft’s

upon certain reinstallations of the software product(s) or

reconfigurations of the computer, and may be completed by Internet

or telephone (toll charges may apply).

Some software may differ from its retail version (if available), and

may not include user manuals or all program functionality.

NOTE

NOTENOTE

NOTE

NOTENOTE

Introduction

This guide

The product specifications and configuration information are

designed for a product Series. Your particular model may not have

all the features and specifications listed or illustrated. For more

detailed information about the features and specifications on your

particular model, please visit Toshiba’s Web site at

pcsupport.toshiba.com.

While Toshiba has made every effort at the time of publication to

ensure the accuracy of the information provided herein, product

specifications, configurations, prices, system/component/options

availability are all subject to change without notice. For the most up-

to-date product information about your computer, or to stay current

with the various computer software or hardware options, visit

Toshiba’s Web site at pcsupport.toshiba.com.

This guide

This guide introduces the computer's features as well as some

basic procedures needed to perform tasks in Windows

® 7.

You can:

❖Read the entire guide from beginning to end.

❖Skim through and stop when a topic interests you.

❖Use the table of contents and the index to find specific

information.

NOTE

NOTENOTE

38 Introduction

Safety icons

This manual contains safety instructions that must be observed to

avoid potential hazards that could result in personal injuries,

damage to your equipment, or loss of data. These safety cautions

have been classified according to the seriousness of the risk, and

icons highlight these instructions as follows:

Indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may

result in property damage.

Provides important information.

Other icons used

Additional icons highlight other helpful or educational information:

TECHNICAL NOTE: This icon indicates technical information about

the computer.

HINT: This icon indicates helpful hints and tips.

DEFINITION: This icon indicates the definition of a term used in the

text.

NOTE

NOTENOTE

Introduction

Other documentation

Your computer comes with the following documentation:

❖An electronic version of the user’s guide (this document)

❖It may also contain guides for other programs that may come

with your system.

For accessory information, visit Toshiba’s Web site at

accessories.toshiba.com.

Service options

Toshiba offers a full line of optional service programs to

complement its standard limited warranty. Toshiba’s standard

limited warranty, extended warranty, and service upgrade terms and

conditions are available at warranty.toshiba.com.

To stay current on the most recent software and hardware options

for your computer, and for other product information, be sure to

regularly check the Toshiba Web site at pcsupport.toshiba.com.

If you have a problem or need to contact Toshiba, see “If Something

Goes Wrong” on page 161.

Chapter 1

Getting Started

This chapter provides tips for using your computer effectively,

summarizes how to connect components, and explains what to do

the first time you use your computer.

The “Instruction Manual for Safety and Comfort,” that is shipped

with your computer, contains important safety information. Please

read the safety instructions carefully and make sure you fully

understand the instructions before you attempt to use your

computer in order to avoid potential hazards that could cause bodily

injury, property damage, or damage the computer.

Selecting a place to work

Your computer is portable and designed to be used in a variety of

circumstances and locations.

Setting up a work environment

Place the computer on a hard flat surface that is large enough for the

computer and any other items you are using, such as a printer.

Leave enough space around the computer and other equipment to

provide adequate ventilation. Otherwise, they may overheat. Read

the “Provide adequate ventilation” section in the “Instruction

Manual for Safety and Comfort” that is shipped with your

computer.

Getting Started

Selecting a place to work

To keep your computer in prime operating condition, protect your

work area from:

❖Dust, moisture, and direct sunlight.

❖Equipment that generates a strong electromagnetic field, such

as stereo speakers (other than speakers that are connected to

the computer) or speakerphones.

❖Rapid changes in temperature or humidity and sources of

temperature change such as air conditioner vents or heaters.

❖Extreme heat, cold, or humidity.

❖Liquids and corrosive chemicals.

Keeping yourself comfortable

The Toshiba Instruction Manual for Safety and Comfort, included

with your computer, contains helpful information for setting up

your work environment and tips for working comfortably

throughout the day.

Precautions

Your computer is designed to provide optimum safety and ease of

use, and to withstand the rigors of travel. You should observe

certain precautions to further reduce the risk of personal injury or

damage to the computer.

❖Avoid prolonged physical contact with the underside or surface

of the computer.

Never allow any liquids to spill into any part of your computer, and

never expose the computer to rain, water, seawater or moisture.

Exposure to liquid or moisture can cause electric shock or fire,

resulting in damage or serious injury. If any of these eventualities

should accidentally occur, immediately:

1. Turn off the computer.

2. Disconnect the AC adaptor from the power plug socket and

computer.

3. Remove the battery pack.

Failure to follow these instructions could result in serious injury or

permanent damage to the computer.

Do not turn on the power again until you have taken the computer to

an authorized service center.

42 Getting Started

Selecting a place to work

❖ Avoid prolonged physical contact with the underside or surface

of the computer.

❖ Computer base and palm rest can become hot! Avoid prolonged

contact to prevent heat injury to skin.

Read the “Avoid extended contact between computer base/palm rest

and skin” section in the “Instruction Manual for Safety and

Comfort” that is shipped with your computer.

Never place a heavy object on the computer and be careful not to

drop a heavy object onto the computer. It could damage the

computer or cause system failure.

❖Never turn off the computer if a drive light indicates a drive is active.

Turning off the computer while it is reading from or writing to

a disk/disc or flash media may damage the disk/disc or flash

media, the drive, or both.

❖Keep the computer and disks away from objects that generate

strong magnetic fields, such as large stereo speakers.

Information on some disks is stored magnetically. Placing a

magnet too close to a disk can erase important files.

Handle discs carefully. Avoid touching the surface of the disc. Grasp

it by its center hole and edge. If you handle the disc incorrectly, you

could damage the disc and possibly lose data.

❖Scan all new files for viruses.

This precaution is especially important for files you receive via

email or download from the Internet. Occasionally, even new

programs you buy from a supplier may contain a computer

virus. You need a special program to check for viruses.

Getting Started

Setting up your computer

Important information on your computer’s cooling fan

Your computer may have a CPU cooling fan that cools the CPU by

drawing outside air into the computer.

Always make sure your computer and AC adaptor have adequate

ventilation and are protected from overheating when the power is turned

on or when an AC adaptor is connected to a power outlet (even if your

computer is in Sleep mode). In this condition, observe the following:

❖ Never cover your computer or AC adaptor with any object.

❖ Never place your computer or AC adaptor near a heat source,

such as an electric blanket or heater.

❖ Never cover or block the air vents including those located at the

base of the computer.

❖ Always operate your computer on a hard flat surface. Using your

computer on a carpet or other soft material can block the vents

located at the base of the computer.

Overheating your computer or AC adaptor could cause system

failure, computer or AC adaptor damage or a fire, possibly resulting

in serious injury.

Read the “Provide adequate ventilation” section in the “Instruction

Manual for Safety and Comfort” that is shipped with your

computer.

The cooling fan location will vary depending on the computer.

Setting up your computer

TECHNICAL NOTE: You must complete all setup steps up to and

including “Setting up your software” on page 48 before adding

external or internal components to your computer. These

components include, but are not limited to, a mouse, keyboard,

printer, and memory.

Your computer contains a rechargeable main battery that needs to

be charged before you can use it.

To use external power or to charge the battery you must attach the

AC adaptor. See “Connecting to a power source” on page 44.

NOTE

NOTENOTE

44 Getting Started

Connecting to a power source

Please handle your computer carefully to avoid scratching or

damaging the surface.

Connecting to a power source

Your computer requires power to operate. Use the power cord/cable

and AC adaptor to connect the computer to a live electrical outlet,

or to charge the computer’s battery.

Never pull on a power cord/cable to remove a plug from a socket. Always

grasp the plug directly. Failure to follow this instruction may damage the

cord/cable, and/or result in a fire or electric shock, possibly resulting in

serious injury.

Always confirm that the power plug (and extension cable plug if used) has

been fully inserted into the socket, to ensure a secure electrical connection.

Failure to do so may result in a fire or electric shock, possibly resulting in

serious injury.

Be careful if you use a multiple connector. An overload on one socket

could cause a fire or electric shock, possibly resulting in serious

injury.

Always use the TOSHIBA AC adaptor that was provided with your

computer and the TOSHIBA Battery Charger (that may have been provided

with your computer), or use AC adaptors and battery chargers specified by

TOSHIBA to avoid any risk of fire or other damage to the computer. Use of

an incompatible AC adaptor or Battery Charger could cause fire or damage

to the computer possibly resulting in serious injury. TOSHIBA assumes no

liability for any damage caused by use of an incompatible adaptor or

charger.

(Sample Illustration) Power cord/cable and AC adaptor

NOTE

NOTENOTE

Power cord/cable

AC adaptor

AC adaptor cord

Getting Started

Connecting to a power source

To connect AC power to the computer:

1Connect the power cord/cable to the AC adaptor.

(Sample Illustration) Connecting the power cord/cable to the AC

adaptor

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects or

other reproductive harm. Wash hands after handling.

2Plug the AC adaptor cord into the DC-IN on the side of the

computer.

(Sample Illustration) Connecting the AC adaptor cord to the

computer

3Connect the power cord/cable to a live electrical outlet.

The AC power light on the indicator panel glows green.

Never attempt to connect or disconnect a power plug with wet hands.

Failure to follow this instruction could result in an electric shock,

possibly resulting in serious injury.

The computer’s main battery light gives you an indication of

the main battery’s current charge:

❖Glows amber while the main battery is being charged

(AC adaptor connected)

46 Getting Started

Charging the main battery

❖Glows green when the main battery is fully charged

❖Is unlit when the main battery has discharged, the battery

is not charging, or the AC adaptor is not plugged into the

computer or AC outlet

❖Flashes amber when the main battery charge is low and it

is time to recharge the main battery or plug in the AC

adaptor

If the AC power light flashes amber during charging, either the main

battery is malfunctioning, or it is not receiving correct input from the

AC power supply.

Disconnect the AC power cord/cable and remove the main battery

pack. See “Changing the main battery” on page 114 for information

on replacing the main battery.

Charging the main battery

Before using the battery to power the computer, you must charge

the battery.

To charge the battery, leave the computer plugged into an AC power

source with the computer turned off until the battery light glows

green. After that, the battery will be completely charged and ready

to power the computer.

Once the battery is charged for the first time, avoid leaving the

computer plugged in and turned off for more than a few hours at a

time. Continuing to charge a fully charged battery can damage the

battery.

TECHNICAL NOTE: The recharging of the battery cannot occur when

your computer is using all of the power provided by the AC adaptor

to run applications, features, and devices. Your computer’s Power

Options utility can be used to select a power level setting that

reduces the power required for system operation and will allow the

battery to recharge.

Battery life and charge time may vary depending on the applications,

power management settings, and features used.

NOTE

NOTENOTE

NOTE

NOTENOTE

Getting Started

Using the computer for the first time

The computer is now ready for you to turn it on and begin using it.

Opening the display panel

1Facing the front of the computer, locate the center of the

display panel.

2Gently raise the panel.

3Adjust the display to a comfortable viewing angle.

(Sample Illustration) Opening the display panel

When opening or closing the display panel, place one hand on the

palm rest to hold the computer in place and use the other hand to

slowly open or close the display panel.

To avoid damaging the display panel, do not force it beyond the point

where it moves easily and never lift the computer by the display

panel.

Do not press or push on the display panel and be careful to remove

any pens or other objects from the keyboard area before closing the

display panel.

Small bright dots may appear on your screen display when you turn

on your computer. Your display contains an extremely large number

of thin-film transistors (TFT) and is manufactured using high-

precision technology. Any small bright dots that may appear on

your display are an intrinsic characteristic of the TFT

manufacturing technology. Over a period of time, and depending on

the usage of the computer, the brightness of the screen will

deteriorate. This is also an intrinsic characteristic of the screen

technology. When the computer is operated on battery power, the

screen will dim and you may not be able to increase the brightness

of the screen while on battery power.

NOTE

NOTENOTE

48 Getting Started

Using the computer for the first time

Turning on the power

To turn on the computer:

1Make sure any external devices (such as the AC adaptor, if you

plan to use AC power rather than battery power) are properly

connected and ready.

2Check to ensure all slots are empty.

3Press and release the power button. The ON/OFF light glows

green.

(Sample Illustration) Turning on the power

The preinstalled operating system will load automatically.

When you turn on the computer for the first time, do not turn off the

power again until the operating system has loaded completely.

Setting up your software

When you turn on the computer for the first time, do not turn off the

power again until the operating system has loaded completely.

The names of windows displayed, and the order in which windows

appear, may vary according to your software setup choices.

NOTE

NOTENOTE

Getting Started

Registering your computer with Toshiba

The first time you turn on your computer, the Setup Wizard guides

you through steps to set up your software. Follow the on-screen

instructions.

Registering your computer with Toshiba

Product registration is strongly recommended, and allows Toshiba

to send you periodic updates, announcements, and special offers

applicable to your product. Product registration can be completed

by either visiting the Toshiba Web site at

http://www.register.toshiba.com, or by clicking Start, All

Programs, My Toshiba, and then Toshiba Registration. Failure to

complete Product Registration will not diminish Customer rights

under the Toshiba standard limited Warranty.

To register online, you must be connected to the Internet.

Adding optional external devices

Before adding external devices or memory, Toshiba recommends

setting up your software. See “Setting up your software” on page 48.

After starting your computer for the first time you may want to:

❖Add more memory (see “Adding memory (optional)” on

page 50)

❖Connect a mouse (see “Using a mouse” on page 78)

❖Connect an external keyboard (see “Using an external

keyboard” on page 78)

❖Connect an external monitor (see “Using external display

devices” on page 76)

❖Connect a local printer (see “Connecting a printer” on page 79)

❖Connect an optional external optical drive

NOTE

NOTENOTE

NOTE

NOTENOTE

50 Getting Started

Adding memory (optional)

HINT: To purchase additional memory modules, see the accessories

information packaged with your system or visit

accessories.toshiba.com.

Your computer comes with enough memory to run most of today’s

popular applications. You may want to increase the computer’s

memory if you use complex software or process large amounts of

data.

Before adding external devices or memory, Toshiba recommends

setting up your software. See “Setting up your software” on page 48.

Installing a memory module

Memory modules can be installed in the memory module slots on

the base of the computer. You will need a small Phillips screwdriver

for this procedure.

If the computer has been running recently, the memory module(s)

may be hot. The surrounding area may also be hot. Allow the

module(s) to cool to room temperature before replacing it. Avoid

touching the cover, the module(s), and the surrounding area before

they have cooled. Failure to follow these directions could result in

minor bodily injury.

To avoid damaging the computer’s screws, use a small Phillips

screwdriver that is in good condition.

NOTE

NOTENOTE

Getting Started

Adding memory (optional)

Installing a memory module with the computer’s power on may

damage the computer, the module, or both.

The computer has two memory slots—Slot A and Slot B. You can

install one or two memory modules.

Before you install or remove a memory module, turn off the computer

using the Start menu. If you install or remove a memory module

while the computer is in Sleep or Hibernation mode, data will be lost

For this model, Slot A is the slot on the right-hand side of the

memory compartment, when looking from the front of the computer.

Slot B is the slot on the left-hand side. If only one memory module is

to be installed, it must be installed in Slot A.

If the computer is on, begin at step 1; otherwise, skip to step 3.

1Click Start.

(Sample Image) Shut down button

2Click the Shut down button in the lower-right corner of the

Start menu.

The computer closes all open programs, shuts down the

operating system, and then turns off.

3Unplug and remove any cables connected to the computer,

including the AC adaptor.

4Close the display panel and turn the computer upside down.

5Remove the main battery. For information on removing the

main battery, see “Removing the battery from the computer”

on page 115.

NOTE

NOTENOTE

Shut down button

Start button

52 Getting Started

Adding memory (optional)

(Sample Illustration) Locating the memory module slot cover

6Using a small Phillips screwdriver, loosen the captive screws

that secure the memory module slot cover.

(Sample Illustration) Removing the memory module slot cover

7Remove the memory module slot cover.

8Place the screws and the cover in a safe place so that you can

retrieve them later.

Static electricity can damage the memory module. Before you handle

the module, touch a grounded metal surface to discharge any static

electricity you may have built up.

Memory module

Front of computer

slot cover

Front of computer

Getting Started

Adding memory (optional)

Avoid touching the connector on the memory module or on the

computer. Grease or dust on the connector may cause memory

access problems.

9Carefully remove the new memory module from its antistatic

packaging, without touching its connector.

10 Locate an empty memory module slot on the underside of the

computer.

If no memory slot is available, you must remove a module by

performing steps 2 3- of “Removing a memory module” on page 56.

For this model, Slot A is the slot on the right-hand side of the

memory compartment, when looking from the front of the computer.

Slot B is the slot on the left-hand side. If only one memory module is

to be installed, it must be installed in Slot A.

11 Pick up the memory module by its sides, avoiding any contact

with its connector. Position the module toward the socket,

aligning the connector’s notch with the matching key in the

socket.

(Sample Illustration) Aligning the memory module with the socket

NOTE

NOTENOTE

NOTE

NOTENOTE

latch

key

notch

connector

54 Getting Started

Adding memory (optional)

12 Firmly press the memory module into the memory slot’s socket

at approximately a 30-degree angle (to the horizontal surface

of the computer).

(Sample Illustration) Inserting the memory module into the socket

13 Once the module’s connector is fully inserted into the socket,

press downward on the top edge of the module to seat the

module into the latches at the sides of the socket. These latches

should “snap” into place securely with the corresponding

cutouts in the side of the module. If the latches and cutouts do

not line up correctly, repeat steps 12 13- .

(Sample Illustration) Pressing down on the memory module

Do not force the memory module into position. The memory

module should be completely inserted into the socket and level

when secured in place.

latch

Getting Started

Adding memory (optional)

(Sample Illustration) Inserting the memory module into the slot

For this model, Slot A is the slot on the right-hand side of the

memory compartment, when looking from the front of the computer.

Slot B is the slot on the left-hand side. If only one memory module is

to be installed, it must be installed in Slot A.

14 Replace the memory module slot cover and secure it using the

screws.

15 Re-insert the main battery. For more information on inserting

the main battery, see “Inserting a charged battery” on page 116.

16 Turn the computer right side up.

17 Reconnect the cables.

18 Restart the computer.

TECHNICAL NOTE: You must have at least one memory module

installed for the computer to work.

You can now continue setting up the computer. When the operating

system has loaded, you can verify that the computer has recognized

the additional memory module.

If you are adding extra memory after setting up the computer, verify

that the computer has recognized it correctly as described in

“Checking total memory” on page 57.

Front of computer

Slot B

Slot A

NOTE

NOTENOTE

56 Getting Started

Adding memory (optional)

Removing a memory module

If you need to remove a memory module:

1Complete steps 1 8– in “Installing a memory module” on

page 50 to shut down the computer and open the memory

module slot cover.

Do not try to remove a memory module with the computer turned on.

You can damage the computer and the memory module.

Do not remove the memory module while the computer is in Sleep or

Hibernation mode. The computer could hang up the next time you

turn it on and data in memory will be lost. In either of the above

cases, the Sleep configuration will not be saved.

The following screen may appear when you turn on the power:

If “Start Windows® Normally” is highlighted, then press Enter.

If one of the Safe Mode options is highlighted, it is best to press

Enter to go into Safe Mode, then shut down and restart the system, at

which time Windows® should boot back up normally.

When Safe Mode is suggested, this could be a sign that you may

need to scan your internal storage drive for errors or defragment the

drive. If so, consult Windows® Help and Support.

2Pull the latches away from the memory module.

The memory module pops up slightly.

NOTE

NOTENOTE

Getting Started

Adding memory (optional)

3Gently lift the memory module to a 30-degree angle and slide it

out of the slot.

(Sample Illustration) Removing the memory module

4Replace the memory module slot cover and secure it using the

screws.

5Re-insert the main battery. For more information on inserting

the main battery, see “Inserting a charged battery” on page 116.

6Turn the computer right side up.

7Reconnect the cables.

8Restart the computer.

TECHNICAL NOTE: You must have at least one memory module

installed for the computer to work.

Checking total memory

When you add or remove a memory module, you can check that the

computer has recognized the change. To do this:

❖Click Start, Control Panel, System and Security, and then

System.

The System window appears. Installed memory (RAM) is

displayed below the System heading.

If the computer does not recognize the memory configuration, turn

off the computer and remove the memory module slot cover

(complete steps 1 8- in “Installing a memory module” on page 50),

and then check that the module is inserted completely into the

socket and lined up squarely with the socket latches.

Front of computer

Slot B

Slot A

58 Getting Started

Recovering the Internal Storage Drive

From time to time, Windows® will display a pop-up that says, “Do

you want to allow the following program to make changes to this

computer?” This is a security feature to prevent programs or people

from doing things on your computer without your permission. If you

were trying to perform the action, click Continue; otherwise, click

Cancel. If unsure, cancel and try again.

Recovering the Internal Storage Drive

Your computer includes recovery utilities to allow you to recover

your internal storage drive if necessary.

The following internal storage drive recovery options are available:

Recovery option Description

Recover to out-of-box

state

This option restores the original factory image to your

internal storage drive, returning your computer to its out-

of-box state. (Recommended recovery method)

See “Recovering to out-of-box state (recommended

recovery method)” on page 59.

Recover to a custom

size partition

This option allows you to specify a custom size for

the C: partition and then restores your C: drive to its out-

of-box state. Note: With this option, any changes you

made to the C: drive and any other drive partitions you

may have created are deleted.

See “Recovering to a custom size partition” on page 61.

Recover without

changing the internal

storage drive partitions

This option recovers just your C: drive, leaving any other

partitions you may have created (for example, a D: drive)

intact.

See “Recovering without changing the internal storage

drive partitions” on page 64.

Restore from recovery

media

If you have created recovery DVDs/media (strongly

recommended), you can recover your system even if the

recovery utilities have been deleted from your internal

storage drive or if you have replaced your computer’s

internal storage drive.

See “Creating recovery DVDs/media” on page 66 and

“Restoring from recovery DVDs/media” on page 67.

NOTE

NOTENOTE

Getting Started

Recovering the Internal Storage Drive

❖During the internal storage drive recovery process it is strongly

recommended that your computer be connected to an external

power source via the AC adaptor.

❖It is strongly recommended that you create recovery

DVDs/media before using your system for the first time. For

more information on creating recovery DVDs/media, see

“Creating recovery DVDs/media” on page 66.

❖The Toshiba Recovery Wizard also provides the option of erasing

your internal storage drive, without restoring the information on

the drive. See “Erasing the Internal Storage Drive” on page 69 for

more information.

Recovering to out-of-box state (recommended recovery method)

Recovering an internal storage drive to its out-of-box state deletes all

partitions on the drive and all information stored in those partitions.

Be sure to save your work to external media before executing the

recovery.

During the recovery process it is strongly recommended that your

computer be connected to an external power source via the AC

adaptor.

You can recover the original factory image (returning the computer

to its out-of-box state) using the utilities stored on your computer’s

internal storage drive or using recovery DVDs/media, if you have

created such media. To recover using the first method, follow the

procedure below. To recover using the second method, see

“Restoring from recovery DVDs/media” on page 67.

To recover the original factory image using the utilities on your

computer’s internal storage drive:

1Make sure the computer is turned off.

2Press and hold the 0 (zero) key on your keyboard while

powering on the computer.

3If your system offers a choice of Windows

® 7 32-bit or 64-bit

operating system, select one at this time. If not, skip to step 4.

NOTE

NOTENOTE

NOTE

NOTENOTE

60 Getting Started

Recovering the Internal Storage Drive

4A warning screen appears, stating that when the recovery is

executed all data will be deleted and rewritten. Click Ye s to

continue.

(Sample Image) Warning screen

5When the Toshiba Recovery Wizard opens and the Selecting a

process screen displays, select Recovery of Factory Default

Software and then click Next.

(Sample Image) Selecting a Process screen

Getting Started

Recovering the Internal Storage Drive

6The Recovery of Factory Default Software screen appears.

Select Recover to out-of-box state.

(Sample Image) Recovery of Factory Default Software screen

7Click Next.

A confirmation message displays reminding you that all data

will be lost during the recovery process. Be sure to save your

work to external media before proceeding.

8Click Next to begin the recovery.

When the process is complete, a message displays indicating

that the internal storage drive has been recovered.

9Press any key on the keyboard to restart the computer.

Recovering to a custom size partition

Recovering to a custom size partition deletes all partitions on the

drive and all information stored in those partitions. Be sure to save

your work to external media before executing the recovery.

During the recovery process it is strongly recommended that your

computer be connected to an external power source via the AC

adaptor.

NOTE

NOTENOTE

62 Getting Started

Recovering the Internal Storage Drive

The “Recover to a custom size partition” option restores your C:

drive to its out-of-box state, and allows you to specify the size for

the C: partition. You can resize and recover the C: drive using the

utilities stored on your computer’s internal storage drive or using

recovery DVDs/media, if you have created such media. To recover

using the first method, follow the procedure below. To recover

using the second method, see “Restoring from recovery

DVDs/media” on page 67.

To resize and recover the C: drive using the utilities on your

computer’s internal storage drive:

1Make sure the computer is turned off.

2Press and hold the 0 (zero) key on your keyboard while

powering on the computer.

3If your system offers a choice of Windows® 7 32-bit or 64-bit

operating system, select one at this time. If not, skip to step 4.

4A warning screen appears, stating that when the recovery is

executed all data will be deleted and rewritten. Click Ye s to

continue.

(Sample Image) Warning screen

Getting Started

Recovering the Internal Storage Drive

5When the Toshiba Recovery Wizard opens and the Selecting a

process screen displays, select Recovery of Factory Default

Software and then click Next.

(Sample Image) Selecting a Process screen

6The Recovery of Factory Default Software screen appears.

Select Recover to a custom size portion.

(Sample Image) Recovery of Factory Default Software screen

7Use the on-screen arrow buttons in The size of drive C: field

to set the partition size.

64 Getting Started

Recovering the Internal Storage Drive

8Click Next.

A confirmation message displays reminding you that all data

will be lost during the recovery process. Be sure to save your

work to external media before proceeding.

9Click Next to begin the recovery.

When the process is complete, a message displays indicating

that the C: drive has been recovered.

10 Press any key on the keyboard to restart the computer.

Recovering without changing the internal storage drive partitions

deletes all information stored on the C: drive. Be sure to save your

work to external media before executing the recovery. If you have

created other partitions (for example, a D: drive), those partitions will

remain intact and any information on them will not be affected.

During the internal storage drive recovery process it is strongly

recommended that your computer be connected to an external power

source via the AC adaptor.

You can recover the C: drive without affecting other partitions by

either using the utilities stored on your computer’s internal storage

drive or by using recovery DVDs/media, if you have created such

media. To recover using the first method, follow the procedure

below. To recover using the second method, see “Restoring from

recovery DVDs/media” on page 67.

To recover using the utilities on your computer’s internal storage

drive:

1Make sure the computer is turned off.

2Press and hold the 0 (zero) key on your keyboard while

powering on the computer.

3If your system offers a choice of Windows® 7 32-bit or 64-bit

operating system, select one at this time. If not, skip to step 4.

NOTE

NOTENOTE

66 Getting Started

Recovering the Internal Storage Drive

6The Recovery of Factory Default Software screen appears.

Select Recover without changing the hard drive partitions.

(Sample Image) Recovery of Factory Default Software screen

7Click Next.

A confirmation message displays reminding you that all data

on the C: drive will be lost during the recovery process. Be sure

to save your work to external media before proceeding.

8Click Next to begin the recovery.

When the process is complete, a message displays, indicating

that the C: drive has been recovered.

9Press any key on the keyboard to restart the computer.

Creating recovery DVDs/media

To purchase an optional external optical drive, visit the Toshiba Web

site at accessories.toshiba.com.

Depending on your system configuration, you may be able to copy

the internal storage drive recovery files to DVDs/media, which

gives you the ability to recover your system if the recovery files

have been deleted from your internal storage drive or if you have

replaced your computer’s internal storage drive.

NOTE

NOTENOTE

Getting Started

Recovering the Internal Storage Drive

The system will prompt you to insert several blank DVDs to copy the

internal storage drive recovery files. If your optical disc drive is not a

writable drive, contact Toshiba Customer Support to obtain the

Recovery media for your system.

The Toshiba Customer Support Center in the United States is

(800) 457-7777; outside the United States it is (949) 859-4273.

To create recovery DVDs/media:

1Connect an optional external writable optical drive.

2Click Start, All Programs, My Toshiba, and then Recovery

Media Creator.

3Select DVD (to create a Recovery media on DVD).

4Select the items you want to copy by clicking the check box

next to the item’s Name—recovery files, applications (original

bundled drivers and applications), or both the recovery files

and applications.

5Click Create.

6Insert a blank DVD into your optional external writable optical

drive when prompted.

As you create your recovery DVD set, be sure to label each DVD

sequentially (for example, “1 of 3,” “2 of 3,” etc.), so that you will

know in which order to insert the discs during recovery.

7Follow the on-screen prompts for completing the copy process.

For more information on using the Recovery media you have

created with the preceding steps see “Restoring from recovery

DVDs/media” on page 67.

Restoring from recovery DVDs/media

The recovery process deletes information stored on the internal

storage drive. Be sure to save your work to external media before

executing the recovery.

To purchase an optional external optical drive, visit the Toshiba Web

site at accessories.toshiba.com.

NOTE

NOTENOTE

NOTE

NOTENOTE

NOTE

NOTENOTE

68 Getting Started

Recovering the Internal Storage Drive

During the internal storage drive recovery process it is strongly

recommended that your computer be connected to an external power

source via the AC adaptor.

If you need to recover your computer to its default factory state, you

can rebuild the system using your Hard Drive Recovery Utilities.

If you have created recovery DVDs/media for your system, you can

recover your system even if the recovery files have been deleted

from your internal storage drive or if you have replaced your

internal storage drive. For instructions on creating recovery

DVDs/media, see “Creating recovery DVDs/media” on page 66.

With recovery media, you can:

❖Recover to out-of-box state

❖Recover to a custom size partition

❖Recover without changing the internal storage drive partitions

For more information on these options, see “Recovering the

Internal Storage Drive” on page 58.

To recover your internal storage drive using the utilities burned to

DVDs:

1Insert the first recovery DVD into your optional external

optical drive and power on the computer.

2When the initial screen displays, press F12.

The boot menu appears.

3Using the arrow keys, select the DVD option and press Enter.

4The Selecting a Process screen appears. Select Toshiba

Recovery Wizard and then click Next.

5If your system offers a choice of Windows® 7 32-bit or 64-bit

operating system, select one at this time. If not, skip to step 6.

6A warning screen appears, stating that when the recovery is

executed all data will be deleted and rewritten. Click Ye s to

continue.

7When the Toshiba Recovery Wizard opens and the Selecting a

Process screen displays, select Recovery of Factory Default

Software and then click Next.

8Select one of the following options:

NOTE

NOTENOTE

Getting Started

Erasing the Internal Storage Drive

❖Recover to out-of-box state—If you want to recover the

original factory image (returning the computer to its out-

of-box state).

❖Recover without changing the hard drive partitions—

If you want to recover the C: partition only, leaving other

partitions you may have created intact.

❖Recover to a custom size partition—If you want to

recover the C: drive to its out-of-box state and specify a

custom size for the C: drive. Note: This option deletes all

other partitions from the drive.

9Follow the on-screen instructions to complete the recovery

process.

When the process is complete, a message displays, indicating

that the drive has been recovered.

10 Press any key on the keyboard to restart the computer.

Erasing the Internal Storage Drive

Erasing the internal storage drive will delete all data on the drive,

including the partitions. Be sure to create recovery DVDs/media and

back up your data to external media before erasing the internal

storage drive.

If you want to restore the internal storage drive, use one of the

recovery options instead of erasing the drive. For more information,

see “Recovering the Internal Storage Drive” on page 58.

To delete all data and partitions from the internal storage drive:

1Access the Toshiba Recovery Wizard on your internal storage

drive or on your recovery DVDs/media.

❖To access the Recovery Wizard on your internal

storage drive: Press and hold the 0 (zero) key while

powering on the computer. Select Windows ® 7 32-bit or

64-bit operating system, if your system offers this choice.

Read the Warning screen that displays and then click Ye s

to continue.

❖To access the Recovery Wizard on your recovery

DVDs/media: Insert the first recovery DVD into the

optional external writable optical drive and power on the

computer. When the initial screen displays, press F12.

NOTE

NOTENOTE

70 Getting Started

Erasing the Internal Storage Drive

Using the arrow keys, select the DVD option on the boot

menu and then press Enter. Select Toshiba Recovery

Wizard Next, and then click .

2Select Erase the hard disk and then click Next.

3Choose one of the following options on the Erase the hard disk

screen:

❖Delete all data and partitions from the hard disk—This

option deletes all of the data on the internal storage drive

without overwriting the drive.

❖Delete all partitions and overwrite all sectors on the

hard disk—This option deletes all data and then

overwrites the entire internal storage drive for security

purposes. This process may take several hours, depending

on the size of your internal storage drive.

(Sample Image) Erase the hard disk screen

4Click Next.

A confirmation message displays reminding you that all data

on the internal storage drive will be lost. Be sure you have

saved your work to external media before proceeding.

5Click Next to begin erasing the internal storage drive.

When the process is complete, a message displays, indicating

that the internal storage drive has been erased.

6Press any key on the keyboard to restart the computer.

Getting Started

Checking the internal storage drive operating status

After restoring your internal storage drive, you can check its status

as follows:

1Click Start.

2Right-click Computer.

3Select Manage.

4Click Disk Management.

5Highlight the internal storage drive in the Volume list to

display its status in the lower portion of the screen.

Installing drivers and applications

The Toshiba Application Installer allows you to reinstall the drivers

and applications that were originally bundled with your computer.

To reinstall drivers and applications:

1Click Start, All Programs, My Toshiba, and then TOSHIBA

Application Installer.

2Click Next.

3Click the item you want to install.

4Click Install.

5Follow the on-screen prompts to complete the installation

process.

Using the TouchPad™

Some of the TouchPad operations described in this section are only

supported in certain applications.

You can use the TouchPad™ (the small, touch-sensitive area in front

of the keyboard) and the adjacent control buttons to:

❖Move the pointer on the screen

❖Select an item on the screen

❖Open or activate an item on the screen

❖Scroll through a document or information

NOTE

NOTENOTE

72 Getting Started

Using the TouchPad™

❖Zoom in for a close-up view

❖Zoom out to see more information at once

(Sample Illustration) The TouchPad and associated control buttons

Refer to the table below for specific instructions on performing

each operation.

The pointer is the icon (usually an arrow) that moves on the screen

when you slide your finger across the TouchPad or move a mouse

connected to your computer.

To: Do the following: Example:

Move the on-screen

pointer

Slide your finger across the TouchPad in the

direction you want to move the pointer.

To move the pointer a longer distance, slide

your finger several times across the

TouchPad in the preferred direction.

(Sample illustration)

Pointer moves to the right

Select an item 1Move the pointer to the item you want to

select.

2Do one of the following:

❖Tap the TouchPad once

❖Press and release the primary

(left-hand) control button

(Sample illustration)

Tap once to select

Secondary control button

Primary control button

TouchPad™

NOTE

NOTENOTE

Getting Started

Using the TouchPad™

Open or activate an

item

1Move the pointer to the item you want to

open/activate.

2Do one of the following:

❖Tap the TouchPad twice in rapid

succession

❖Press and release the primary

control button twice in rapid

succession

(Sample illustration)

Tap twice to open

Right-click an item 1Move the pointer to the item you want to

right-click.

2Press and release the secondary control

button.

This feature varies by program. Check your

program documentation for specific

instructions on right-clicking. (Sample illustration)

Click the secondary (right-

hand) control button

Scroll vertically Slide your finger along the right edge of the

TouchPad in the direction you want to scroll.

Repeat to scroll a longer distance.

(Sample illustration)

Vertical scrolling active

area

Scroll horizontally Slide your finger along the bottom edge of

the TouchPad in the direction you want to

scroll. Repeat to scroll a longer distance.

(Sample illustration)

Horizontal scrolling active

area

To: Do the following: Example:

76 Getting Started

Using external display devices

Your computer comes with a built-in display, but you can also

connect the following types of external display devices to the video

ports described below:

❖An HDMI™-compatible television or VCR/DVD player via

the HDMI Out port

❖An external monitor or projector via the RGB (monitor) port

(Sample Illustration) Video ports

Connecting the display device

If you are connecting a television or other video display device to

the computer’s HDMI™ Out port, refer to “Connecting an

HDMI™-compatible television or VCR/DVD player” on page 76.

Selecting video cables

To connect a device to the HDMI™ Out port, you must purchase an

HDMI cable.

Connecting an HDMI™-compatible television or VCR/DVD

player

To connect an HDMI™-compatible television or VCR/DVD player

to the computer:

❖Connect one end of an HDMI cable (not included with your

computer) to the HDMI Out port on the side of your computer,

and then connect the other end of the cable to your television.

Refer to the manual that came with the television for more

information.

Your computer will automatically detect the external display

device.

HDMI™ Out portRGB (Monitor) port

Getting Started

Using external display devices

Connecting an external monitor or projector

You can easily attach an external monitor or projector to your

computer if you need a larger screen. To do this:

1Read the directions that came with the monitor to see if you

first need to install new software.

2Connect the monitor’s video cable to the RGB (monitor) port

on the side of the computer.

3Connect the device’s power cable to a live electrical outlet.

4Turn on the external device.

Your computer will automatically detect the external display

device.

In the future you can change the display settings by pressing Fn+F5,

or by configuring the display properties settings.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can

choose to use the internal display only, the external device only, or

both simultaneously.

Some modes are only available with the appropriate device attached

and turned on.

The quickest way to change the display output settings is to use the

display hot key (Fn + F5):

1Press Fn F5 and simultaneously.

2While holding down Fn F5, press repeatedly until the setting

you want takes effect. Briefly pause each time you press the F5

key to allow time for the display to change.

This hot key cycles through the settings in the following order

(the last two options are available if an external monitor is

connected):

❖Built-in display only

❖Built-in display and external monitor simultaneously

❖External monitor only

❖TV (or other external video device) only

NOTE

NOTENOTE

NOTE

NOTENOTE

78 Getting Started

Using an external keyboard

❖Built-in display and TV (or other external video device)

simultaneously

❖Built-in display and external monitor (extended desktop)

❖Built-in display and TV (extended desktop)

❖Swap—Switch primary display between internal display

and external monitor when using extended desktop

(Sample Image) Display options window

3Release the Fn key.

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other

video display device), you may need to adjust the video settings.

See the video device documentation for additional configuration

steps.

Using an external keyboard

If you prefer to use an external keyboard, you can attach one

to your computer. The computer’s USB ports support most

USB-compatible keyboards.

Using a mouse

You may want to use a mouse instead of the computer’s built-in

TouchPad™. You can use a USB-compatible mouse.

Getting Started

Connecting a printer

Your printer documentation may require you to install the printer

software before physically connecting the printer to your computer. If

you do not install the software as instructed by the printer

manufacturer, the printer may not function correctly.

Read the documentation that came with your printer. Follow the

manufacturer’s instructions when connecting a printer.

You can connect a USB-compatible printer to your computer

through the USB ports. To determine if the printer is

USB-compatible, check its documentation.

To make the connection, you need a suitable USB cable which may

come with your printer. If a USB cable was not included with your

printer, you can purchase one from a computer or electronics store.

If your printer supports Plug and Play, your computer may

automatically recognize the printer; the printer is then ready for use.

Refer to your printer documentation for further instructions.

TECHNICAL NOTE: To determine if your printer supports Plug and

Play, check its documentation.

If your printer does not support Plug and Play, you can set up the

printer as described in “Setting up a printer” on page 80.

To connect a printer to your computer:

1Connect the printer cable to the printer and then connect the

other end to one of the computer’s USB ports.

2Plug the printer’s power cable into a live AC outlet.

NOTE

NOTENOTE

80 Getting Started

Turning off the computer

Setting up a printer

Some printers require a specific installation process. Refer to your

printer installation guide for instructions before completing the

following procedure.

If your printer does not support Plug and Play, follow these steps to

set it up for the first time. You only need to set up the printer once.

1Click Start, Control Panel, Hardware and Sound, and then

under Devices and Printers, click Add a printer.

The Add Printer Wizard appears.

(Sample Image) Add Printer Wizard

2Follow the on-screen instructions to set up your printer.

Turning off the computer

Pressing the power button before shutting down the Windows

operating system could cause you to lose your work. Make sure the

system indicator panel’s storage drive light and the drive in-use light

are off. If you turn off the power while a disk/disc is being accessed,

you may lose data or damage the disk/disc and/or drive.

It is a good idea to turn off your computer when you are not using it

for a while.

If you are using the computer for the first time, leave the computer

plugged into a power source (even though the computer is off) to

fully charge the main battery.

NOTE

NOTENOTE

Getting Started

Turning off the computer

Options for turning off the computer

Depending on the operating system installed, you have more than

one option available for turning off the computer: Shut down,

Hibernate, and Sleep. Each option has its advantages.

❖Use the Shut down or Hibernate command if you will not be

using the computer for several days or if you must turn off your

computer.

You must turn off your computer in order to upgrade your

computer’s internal hardware (such as memory).

TECHNICAL NOTE: Before using the Shut down option to turn off

your computer, save your files and make sure all disk/disc activity

lights are off.

If you change your mind and decide to continue working after all,

wait a few seconds before turning the computer on again.

❖Use the Sleep command to save your work, system settings,

and current state of the desktop to memory, so that when you

turn on the computer again, you will quickly and automatically

return to where you left off.

Hibernation mode

Hibernation mode shuts the computer down completely, but it first

saves the current state of the computer to the internal storage drive.

Since Hibernation mode does not require power to maintain the

saved information, system settings are retained indefinitely.

Factors to consider when choosing Hibernation:

❖While in Hibernation mode, the computer uses no main battery

power.

❖Because the state of the system is stored to the internal storage

drive, no data is lost if the main battery discharges.

❖Restarting from Hibernation takes less time and consumes less

main battery power than restarting after turning off the

computer using the Shut down command.

❖Restarting from Hibernation takes a little more time and

consumes more main battery power than restarting from Sleep.

❖When starting up again, the computer returns to the state in

which you left it, including all open programs and files you

were using.

82 Getting Started

Turning off the computer

For information on how to use and configure Hibernation mode see

“Using and configuring Hibernation mode” on page 85.

Sleep mode

The Sleep command places the computer into a power-saving

mode. Sleep saves the current state of the computer to memory so

that, when you restart the computer, you can continue working from

where you left off.

After your computer sleeps for an extended period of time, the

Windows

® operating system may save any open documents and

programs to your internal storage drive, and then shuts down the

computer.

Factors to consider when choosing Sleep:

❖While in Sleep mode, the computer uses some main battery

power.

❖Because the state of the system is stored in memory, you will

lose data if the main battery discharges completely while the

computer is in Sleep mode.

❖Restarting from Sleep takes less time and consumes less main

battery power than restarting after turning off the computer

using the Hibernation or Shut down commands.

❖When starting up again, the computer returns to the mode in

which you left it, including all open programs and files you

were using.

❖If the battery charge becomes critically low, the computer will

try to enter Hibernation mode.

If you power down using the Sleep command and the main battery

discharges fully, your unsaved information will be lost. Be sure to

save your work first.

For information on using Sleep, see “Using and configuring Sleep

mode” on page 87.

NOTE

NOTENOTE

Getting Started

Turning off the computer

Using the Shut down command

The Shut down command completely shuts down the computer

without saving your work or the current state of the computer. This

command closes all open programs, shuts down the operating

system, and then turns off your computer.

To turn off your computer using the Shut down command:

1Click Start.

(Sample Image) Shut down button

2Click the Shut down button in the lower-right corner of the

Start menu.

The computer closes all open programs, shuts down the

operating system, and then turns off.

Turning off the computer more quickly

You can also turn off the computer by pressing the power button.

To use this method, you first need to activate it using the Power

Options feature. By default, pressing your computer’s power button

puts the computer into Sleep mode.

1Click Start, Control Panel, System and Security, and then

Power Options.

The Power Options window appears.

2Click Change plan settings under the power plan to be

customized.

Shut down button

Start button

84 Getting Started

Turning off the computer

The Edit Plan Settings window appears.

3Click Change advanced power settings.

The Advanced settings tab of the Power Options window

appears.

4Double-click Power buttons and lid to display the actions that

you can configure.

(Sample Image) Advanced settings tab of Power Options screen

5Select the options you want from the drop-down list.

These options can be set separately for how they operate while the

computer is running on battery power or while connected to AC

power.

❖Lid close action

Set this option to Sleep if you want the computer to go

into Sleep mode when you close the display panel.

❖Power button action

Set this option to Sleep if you want the computer to go

into Sleep mode when you press the power button.

6Click Apply.

7Click OK.

Once the computer is configured, you can turn it off by either

pressing the power button or closing the display panel, depending

on the options set.

NOTE

NOTENOTE

100 Learning the Basics

Saving your work

Many programs offer a feature that saves documents at regular

intervals. Check your program’s documentation to see if it has an

automatic save feature.

Saving files

1Click on the arrow in the upper-left corner of your

Windows®-based application to display the drop-down menu,

and then click Save.

If you are working with a document that already has a file

name, this is all you need to do. If you created a new document,

your program displays a Save As dialog box.

Use this dialog box to specify where to store the document and

to give it a file name.

(Sample Image) Save As dialog box

2Choose the drive and folder where you want your file to be

stored.

3Type a file name, then click Save.

Specyfikacje produktu

Marka:	Toshiba
Kategoria:	laptop
Model:	Satellite T135

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Toshiba Satellite T135, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje laptop Toshiba

Toshiba Dynabook V714 Instrukcja

31 Grudnia 2025

Toshiba Satellite 2430 Instrukcja

13 Października 2024

Toshiba Portege R500 Instrukcja

3 Października 2024

Toshiba Portege Z30T Instrukcja

22 Września 2024

Toshiba Satellite Pro L800 Instrukcja

15 Września 2024

Toshiba Libretto U100 Instrukcja

15 Września 2024

Toshiba Satellite C870-1DJ Instrukcja

14 Września 2024

Toshiba Tecra Z50-A Instrukcja

14 Września 2024

Toshiba NB300 Instrukcja

14 Września 2024

Toshiba Dynabook R83 Instrukcja

13 Września 2024

Instrukcje laptop

Najnowsze instrukcje dla laptop

Dell Latitude E7240 Instrukcja

3 Kwietnia 2025

Ergotron StyleView Instrukcja

2 Kwietnia 2025

Acer Chromebook Plus 515 Instrukcja

28 Marca 2025

Lenovo IdeaPad 3 17ALC6 Instrukcja

28 Marca 2025

Lenovo IdeaPad 1 15ALC7 Instrukcja

26 Marca 2025

Dell Inspiron 1501 Instrukcja

13 Marca 2025

ECS H42IA1 Instrukcja

7 Marca 2025

HP EliteBook X Flip G1i Instrukcja

4 Marca 2025

Everex StepNote NM3900W Instrukcja

1 Marca 2025

Dell Latitude 7320 Detachable Instrukcja

26 Lutego 2025