Instrukcja obsługi Toshiba Satellite Click 2 Pro

Toshiba Zeszyt Satellite Click 2 Pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Toshiba Satellite Click 2 Pro (185 stron) w kategorii Zeszyt. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/185

GMAD00398012

06/14

If you need assistance:

Technical support is available online at Toshiba’s Web site at

support.toshiba.com. At this Web site, you will find answers

for many commonly asked technical questions plus many

downloadable software drivers, BIOS updates, and other

downloads.

For more information, see “If Something Goes Wrong” on

page 104 in this guide.

User’s Guide

5.375 x 8.375 ver 2.3

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects

or other reproductive harm. Wash hands after handling.

For the state of California only.

Model: Satellite®/Satellite Pro® (P30W-B

Series)

Recordable and/or ReWritable Drive(s)

and Associated Software Warranty

The device system you purchased may include Recordable and/or

ReWritable optical disc drive(s) and associated software, among

the most advanced data storage technologies available. As with

any new technology, you must read and follow all set-up and usage

instructions in the applicable user guides and/or manuals enclosed

or provided electronically. If you fail to do so, this product may not

function properly and you may lose data or suffer other damage.

TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

(“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT

WARRANT THAT OPERATION OF THE PRODUCT WILL BE

UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT

TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO

RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY

BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK

SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT

OF OR RESULTING FROM THE USE OF THE PRODUCT,

EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

5.375 x 8.375 ver 2.3

Protection of Stored Data

For your important data, please make periodic back-up copies of all

the data stored on the hard disk or other storage devices as a

precaution against possible failures, alteration, or loss of the data.

IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE,

FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR

OTHER STORAGE DEVICES AND THE DATA CANNOT BE

RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY

DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE

RESULTING THEREFROM. WHEN COPYING OR

TRANSFERRING YOUR DATA, PLEASE BE SURE TO

CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY

COPIED OR TRANSFERRED. TOSHIBA DISCLAIMS ANY

LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE

DATA CORRECTLY.

Critical Applications

The device you have purchased is not designed for any “critical

applications.” “Critical applications” means life support systems,

medical applications, connections to implanted medical devices,

commercial transportation, nuclear facilities or systems or any other

applications where product failure could lead to injury to persons or

loss of life or catastrophic property damage. ACCORDINGLY,

TOSHIBA, ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY

AND ALL LIABILITY ARISING OUT OF THE USE OF THE

device PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU

USE THE device PRODUCTS IN A CRITICAL APPLICATION,

YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY

FOR SUCH USE.

5.375 x 8.375 ver 2.3

FCC Notice “Declaration of Conformity

Information”

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, it may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

❖Reorient or relocate the receiving antenna.

❖Increase the separation between the equipment and receiver.

❖Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

❖Consult the dealer or an experienced radio/TV technician for

help.

Only Peripherals complying with the FCC Class B limits may

be attached to this equipment. Operation with noncompliant

peripherals or peripherals not recommended by Toshiba is

likely to result in interference to radio and TV reception.

Shielded cables must be used between the external devices

and your device's ports. Changes or modifications made to

this equipment not expressly approved by Toshiba or parties

authorized by Toshiba could void the user's authority to

operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

❖This device may not cause harmful interference.

❖This device must accept any interference received, including

interference that may cause undesired operation.

Contact Toshiba’s Support Web site at support.toshiba.com.

NOTE

5.375 x 8.375 ver 2.3

Bluetooth® Wireless Technology

Interoperability

This section is only applicable if your system has a

Bluetooth

module.

Bluetooth

® modules are designed to be interoperable with any

product with

Bluetooth

wireless technology that is based on

Frequency Hopping Spread Spectrum (FHSS) radio technology, and

is compliant to:

❖

Bluetooth

Specification as defined and approved by The

Bluetooth

Special Interest Group.

❖Logo certification with

Bluetooth

wireless technology as

defined by The

Bluetooth

Special Interest Group.

Bluetooth

modules enable wireless networks over two or

more (up to a total of seven) TOSHIBA portable devices.

Please contact TOSHIBA computer product support on Web

site http://www.toshiba-europe.com/computers/tnt/

bluetooth.htm in Europe or support.toshiba.com in the

United States for more information.

When you use a

Bluetooth

module close to 2.4 GHz Wireless

LAN devices,

Bluetooth

transmissions might slow down or

cause errors. If you detect certain interference while you use

Bluetooth

device, always change the frequency, move your

device to the area outside of the interference range of 2.4

GHz Wireless LAN devices (40 meters/43.74 yards or more)

or stop transmitting from your device. Please contact

TOSHIBA computer product support on Web site http://

www.toshiba-europe.com/computers/tnt/bluetooth.htm in

Europe or support.toshiba.com in the United States for more

information.

Bluetooth

and Wireless LAN devices operate within the

same radio frequency range and may interfere with one

another. If you use

Bluetooth

and Wireless LAN devices

simultaneously, you may occasionally experience a less than

optimal network performance or even lose your network

connection. If you should experience any such problem,

immediately turn off either one of your

Bluetooth

or Wireless

LAN. Please contact Toshiba computer product support on

Web site http://www.toshiba-europe.com/computers/tnt/

bluetooth.htm in Europe or support.toshiba.com in the

United States for more information.

NOTE

5.375 x 8.375 ver 2.3

Bluetooth® Wireless Technology and Your

Health

The products with

Bluetooth

® wireless technology, like other radio

devices, emit radio frequency electromagnetic energy. The level of

energy emitted by devices with

Bluetooth

wireless technology

however is much less than the electromagnetic energy emitted by

wireless devices such as mobile phones.

Because products with

Bluetooth

wireless technology operate within

the guidelines found in radio frequency safety standards and

recommendations, TOSHIBA believes

Bluetooth

wireless technology

is safe for use by consumers. These standards and

recommendations reflect the consensus of the scientific community

and result from deliberations of panels and committees of scientists

who continually review and interpret the extensive research literature.

In some situations or environments, the use of

Bluetooth

wireless

technology may be restricted by the proprietor of the building or

responsible representatives of the organization. These situations may

for example include:

❖Using the equipment with

Bluetooth

wireless technology on

board airplanes, or

❖In any other environment where the risk of interference to other

devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless

devices in a specific organization or environment (e.g. airports), you

are encouraged to ask for authorization to use the device with

Bluetooth

wireless technology prior to turning on the equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the

Bluetooth

module is far

below the FCC radio frequency exposure limits.

Nevertheless, the

Bluetooth

module shall be used in such a

manner that the potential for human contact during normal

operation is minimized.

5.375 x 8.375 ver 2.3

Wireless Interoperability

Wireless LAN products are designed to be interoperable with any

wireless LAN product that is based on Direct Sequence Spread

Spectrum (DSSS) radio technology, and is compliant to:

❖The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n/

ac), as defined and approved by the Institute of Electrical and

Electronics Engineers.

❖The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi

Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the

Wi-Fi Alliance.

Bluetooth

® and Wireless LAN devices operate within the

same radio frequency range and may interfere with one

another. If you use

Bluetooth

and Wireless LAN devices

simultaneously, you may occasionally experience a less than

optimal network performance or even lose your network

connection.

If you should experience any such problem, immediately turn

off your

Bluetooth

or Wireless LAN device.

Please contact Toshiba computer product support on Web

site http://www.toshiba-europe.com/computers/tnt/

bluetooth.htm in Europe or support.toshiba.com in the

United States for more information.

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in

the 5.15 GHz to 5.25 GHz frequency range. FCC requires

this product to be used indoors for frequency range 5.15

GHz to 5.25 GHz to reduce the potential for harmful

interference to co-channel Mobile Satellite systems.

Please note that high-power radars are allocated as primary

users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85

GHz bands. These radar stations can cause interference with

and/or damage this device.

The above caution applies to products that operate with an

802.11a radio device.

NOTE

5.375 x 8.375 ver 2.3

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency

electromagnetic energy. The level of energy emitted by Wireless LAN

devices however is far much less than the electromagnetic energy

emitted by wireless devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found

in radio frequency safety standards and recommendations, TOSHIBA

believes Wireless LAN is safe for use by consumers. These standards

and recommendations reflect the consensus of the scientific

community and result from deliberations of panels and committees

of scientists who continually review and interpret the extensive

research literature.

In some situations or environments, the use of Wireless LAN may be

restricted by the proprietor of the building or responsible

representatives of the organization. These situations may for example

include:

❖Using the Wireless LAN equipment on board airplanes, or

❖In any other environment where the risk of interference to other

devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless

devices in a specific organization or environment (e.g. airports), you

are encouraged to ask for authorization to use the Wireless LAN

device prior to turning on the equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the Wireless LAN is far below

the FCC radio frequency exposure limits. Nevertheless, the

Wireless LAN shall be used in such a manner that the

potential for human contact during normal operation is

minimized. The antenna(s) used for this transmitter must not

be co-located or operating in conjunction with any other

antenna or transmitter.

5.375 x 8.375 ver 2.3

Canada – Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme

NMB-003 du Canada.

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the

antenna is located or pointed such that it does not emit RF

field in excess of Health Canada limits for the general

population; consult Safety Code 6, obtainable from Health

Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device

shall not be co-located with any other transmitter that has

not been tested with this device.

Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired

operation of this device.

L’ utilisation de ce dispositif est soumis aux deux conditions

suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du

dispositif doit être prêt à accepter tout brouillage radioélectrique

reçu, même s’il est susceptible de compromettre son

fonctionnement.

The term “IC” before the equipment certification number only

signifies that the Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is

intended to be operated indoors and away from windows to provide

maximum shielding. Equipment (or its transmit antenna) that is

installed outdoors is subject to licensing.

Pour empecher que cet appareil cause du brouillage au service

faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait

etre place loin des fenetres afin de Fournier un ecram de blindage

maximal. Si le matriel (ou son antenne d’emission) est installe a

l’exterieur, il doit faire l’objet d’une licence.

This device is restricted to indoor use due to its operation in

the 5.15 GHz to 5.25 GHz frequency range. Industry Canada

requires this product to be used indoors for frequency range

5.15 GHz to 5.25 GHz to reduce the potential for harmful

interference to co-channel Mobile Satellite systems.

Please note that high-power radars are allocated as primary

users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85

GHz bands. These radar stations can cause interference with

and/or damage this device.

5.375 x 8.375 ver 2.3

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont

réservés uniquement pour une utilisation à l’intérieur afin de réduire

les risques de brouillage préjudiciable aux systèmes de satellites

mobiles utilisant les mêmes canaux.

Veuillez noter que les utilisateurs de radars de haute puissance sont

désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les

bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars

pourraient causer du brouillage et/ou des dommages aux dispositifs

LAN-EL.

The above caution applies to products that operate with an

802.11a radio device.

Regulatory statements

This product complies with any mandatory product specification in

any country/region where the product is sold. In addition, the product

complies with the following:

EU Declaration of Conformity

TOSHIBA declares that this product conforms to the following

Standards:

This product is carrying the CE-Mark in accordance with the related

European Directives. The party responsible for CE-Marking is

TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss,

Germany.

Supplementary

Information:

*The product complies with the

requirements of the Low Voltage

Directive 73/23/EEC, the EMC

Directive 89/336/EEC and/or the

R&TTE Directive 1999/5/EC,

compatible with the RoHS

Directive 2011/65/EU and the Eco

Design Directive 2009/125/EC

(ErP) and the related implementing

measures.

NOTE

5.375 x 8.375 ver 2.3

The European Union WEEE (Waste from

Electrical and Electronic Equipment)

Directive Information

The European Union WEEE (Waste from Electrical and Electronic

Equipment) Directive is intended to protect the quality of the

environment and human health through the responsible use of

natural resources and the adoption of waste management strategies

that focus on recycling and reuse. This Directive requires producers

of electrical and electronic products put on the market in European

Union (EU) member countries after August 2005 to mark such

products with a crossed-out wheeled bin with a black bar symbol. If

the product’s battery or accumulator contains more than the

specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd)

defined in the Battery Directive (2006/66/EC), then the chemical

symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear

below the crossed out wheeled bin symbol on the battery.

In the European Union, these symbols indicate that when the last end

user wishes to discard this product, it must be sent to appropriate

facilities for recovery and recycling. This Directive applies to EU

member countries only and does not apply to end users in other

countries such as the United States.

Although the initial emphasis is in Europe, Toshiba is already working

with design engineers, suppliers, and other partners to determine

appropriate worldwide product life cycle planning and end-of-life

strategies for our products. Please contact your local government for

applicable laws and regulations governing the disposal of this

product. For information on how to trade-in or recycle your product,

visit www.reuse.toshiba.com.

Pb, Hg, Cd

5.375 x 8.375 ver 2.3

Europe - Restrictions for use of 2.4 GHz

Frequencies in European Community

Countries

België/

Belgique:

For private usage outside buildings across public grounds over

less than 300m no special registration with IBPT/BIPT is

required. Registration to IBPT/BIPT is required for private

usage outside buildings across public grounds over more than

300m. For registration and license please contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over

afstand kleiner dan 300m geen registratie bij BIPT/IBPT nodig;

voor gebruik over afstand groter dan 300m is wel registratie bij

BIPT/IBPT nodig. Voor registratie of licentie kunt u contact

opnemen met BIPT.

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment,

au-dessus d’un espace public, aucun enregistrement n’est

nécessaire pour une distance de moins de 300m. Pour une

distance supérieure à 300m un enregistrement auprès de

l’IBPT est requise. Pour les enregistrements et licences,

veuillez contacter l’IBPT.

Deutschland: License required for outdoor installations. Check with reseller

for procedure to follow.

Anmeldung im Outdoor-Bereich notwendig, aber nicht

genehmigungspflichtig. Bitte mit Händler die Vorgehensweise

abstimmen.

France: Restricted frequency band: only channels 1 to 7 (2400 MHz

and 2454 MHz respectively) may be used outdoors in France.

Please contact A.R.T. (http://www.art-telecom.fr) for applicable

procedures to follow.

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et

2454 MHz respectivement) doivent être utilisés endroits

extérieur en France. Vous pouvez contacter l’Autorité de

Régulation des Télécommunications (http://www.art-

telecom.fr) pour la procédure à suivre.

Italia: License required for indoor use. Use with outdoor installations

not allowed.

È necessaria la concessione ministeriale anche per l’uso

interno.

Verificare con i rivenditori la procedura da seguire.

Nederland: License required for outdoor installations. Check with reseller

for procedure to follow.

Licentie verplicht voor gebruik met buitenantennes. Neem

contact op met verkoper voor juiste procedure.

5.375 x 8.375 ver 2.3

Europe - Restrictions for Use of 5 GHz

Frequencies in European Community

Countries

O: allowed x: forbidden

❖To remain in conformance with European spectrum usage laws

for Wireless LAN operation, the above 2.4 GHz and 5 GHz

channel limitations apply. The user should use the wireless

LAN utility to check the current channel of operation. If

operation is occurring outside of the allowable frequencies as

listed above, the user must cease operating the Wireless LAN

at that location and consult the local technical support staff

responsible for the wireless network.

❖The 5 GHz Turbo mode feature is not allowed for operation in

any European Community country.

❖This device must not be operated in ad-hoc mode using

channels in the 5 GHz bands in the European Community.

Ad-hoc mode provides a direct communication between two

client devices without a Wireless LAN Access Point.

❖This device must be used with Access Points that have

employed and activated a radar detection feature required for

European Community operation in the 5 GHz bands. This

device will operate under the control of the Access Point in

order to avoid operating on a channel occupied by any radar

system in the area. The presence of nearby radar operation

may result in temporary interruption of operation of this device.

European Community

Countries

5150-5250

MHz

Channels: 36,

40, 44, 48

Indoor Only

5250-5350

MHz

Channels: 52,

56, 60, 64

Indoor Only

5470-5725 MHz

Channels: 100, 104,

108, 112, 116, 120,

124, 128, 132, 136,

140

Indoor/Outdoor

Austria O x x

Belgium, France,

Switzerland/

Liechtenstein

OOx

Denmark, Finland,

Germany, Greece,

Ireland, Italy,

Luxembourg,

Netherlands, Norway,

Portugal, Sweden, UK

OOO

Iceland, Spain O O O

5.375 x 8.375 ver 2.3

The Access Point’s radar detection feature will automatically

restart operation on a channel free of radar. You may consult

with the local technical support staff responsible for the

wireless network to ensure the Access Point device(s) are

properly configured for European Community operation.

Taiwan

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication

laws and regulations.

Low power radio frequency electric machinery shall resist against

interference from legal communications or from industrial, scientific

and medical radio emission electric machinery.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for

second generation low-power data communication systems such as

this equipment overlaps that of mobile object identification systems

(premises radio station and specified low-power radio station).

1. Sticker

Please put the following sticker on devices incorporating this

product.

Article 14 Unless approved, for any model accredited low power radio

frequency electric machinery, any company, trader or user shall

not change the frequency, increase the power or change the

features and functions of the original design.

Article 17 Any use of low power radio frequency electric machinery shall

not affect aviation safety and interfere with legal

communications. In the event interference is caused, the use of

such electric machinery shall be immediately discontinued.

Operation of such products can be resumed only when they are

modified and can no longer cause interference.

The frequency bandwidth of this equipment may operate within the

same range as industrial devices, scientific devices, medical

devices, microwave ovens, licensed radio stations and non-licensed

specified low-power radio stations for mobile object identification

systems (RFID) used in factory product lines (Other Radio Stations).

1. Before using this equipment, ensure that it does not interfere with

any of the equipment listed above.

2. If this equipment causes RF interference to other radio stations,

promptly change the frequency being used, change the location

of use, or turn off the source of emissions.

3. Contact TOSHIBA Direct PC if you have problems with interference

caused by this product to Other Radio Stations.

5.375 x 8.375 ver 2.3

2. Indication

The indication shown below appears on this equipment.

12.4: This equipment uses a frequency of 2.4 GHz.

2DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

3The interference range of this equipment is less than 40m.

4This equipment uses a frequency bandwidth from

2,400 MHz to 2,483.5 MHz.

It is possible to avoid the band of mobile object identification

systems.

The indication shown below appears on this equipment.

12.4: This equipment uses a frequency of 2.4 GHz.

2FH: This equipment uses FH-SS modulation.

3The interference range of this equipment is less than 10m.

4This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz.

3. TOSHIBA Direct PC

Monday – Friday: 10:00 – 17:00

Toll Free Tel: 0120-15-1048

Direct Dial: 03-3457-4850

Fax: 03-3457-4868

VCCI Class B Information

2.4DSOF4

(1)

(2)

(3)

(4)

2.4FH1

(1)

(2)

(3)

(4)

5.375 x 8.375 ver 2.3

Device Authorization

This device obtains the Technical Regulation Conformity Certification

and the Technical Conditions Compliance Approval, and it belongs to

the device class of radio equipment of low-power data

communication system radio station stipulated in the Radio Law and

the Telecommunications Business Law of Japan.

This guide is copyrighted by Toshiba America Information Systems,

cannot be reproduced in any form without the prior written

permission of Toshiba. No patent liability is assumed, however, with

respect to the use of the information contained herein.

rights reserved.

Export Administration Regulation

This document contains technical data that may be controlled under

the U.S. Export Administration Regulations, and may be subject to

the approval of the U.S. Department of Commerce prior to export.

Any export, directly or indirectly, in contravention of the U.S. Export

Administration Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to

any product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA

INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO

WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER

INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY

DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD

TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY

FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY

FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR

OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES

BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT

SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,

WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,

ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR

ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE

THEREOF.

5.375 x 8.375 ver 2.3

Trademarks

Satellite, Satellite Pro, Satellite Click, and eco Utility are either

registered trademarks or trademarks of Toshiba America Information

Systems, Inc. and/or Toshiba Corporation.

Adobe and Photoshop are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United States

and/or other countries.

Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.

and any use of such marks by Toshiba is under license. Other

trademarks and trade names are those of their respective owners.

U.S. patents apply to this product. See http://patents.dts.com.

Manufactured under license from DTS Licensing Limited. DTS, the

Symbol, & DTS and the Symbol together are registered trademarks

and DTS Premium Voice Pro is a trademark of DTS, Inc. ©DTS, Inc.

The terms HDMI and HDMI High-Definition Multimedia Interface, and

the HDMI logo are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or

registered trademarks of Intel Corporation or its subsidiaries in the

United States and other countries.

Microsoft, Outlook, Windows, and Windows Media are either

registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

microSD is a trademark or registered trademark of SD-3C, LLC in the

United States, other countries or both.

MultiMediaCard and MMC are registered trademarks of

MultiMediaCard Association.

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

All other brand and product names are trademarks or registered

trademarks of their respective companies.

Licenses

This Product is licensed under the AVC, the VC-1 and the MPEG-4

Part 2 Visual patent portfolio licenses for the personal and non-

commercial use of a consumer to (i) encode video in compliance with

the above standards (“Video Standards”) and/or (ii) decode AVC,

VC-1 and MPEG-4 Part 2 Visual that was encoded by a consumer

engaged in personal and non-commercial activity or was obtained

from a video provider licensed to provide such video. None of the

licenses extend to any other product regardless of whether such

product is included with this product in a single article. No license is

granted or shall be implied for any other use. Additional information

may be obtained from MPEG LA, LLC. See www.mpegla.com.

5.375 x 8.375 ver 2.3

Device Recycling Information

As part of a commitment to people and the future, Toshiba promotes

the efficient use of resources by working to achieve our zero-waste-

to-landfill goal at all our production sites. In addition to our existing

waste reduction and recycling policies, Toshiba is strongly

committed to reducing electronic waste. In order to ensure efficient

use of resources and appropriate treatment of hazardous

substances, in accordance with recycling regulations in each state,

country, and territory, Toshiba wants to make it easy for customers to

recycle products at the end of the life cycle. To learn more about

Toshiba's sustainability commitment, visit toshiba.com/recycle.

Reuse, Donation, Recycling

Functional devices can be donated to a local charity or resold easily

through a Toshiba-branded program.

Non working Toshiba devices can be mailed-back for free recycling.

For additional details, please visit toshiba.com/recycle.

5.375 x 8.375 ver 2.3

Contents

Chapter 1: Introduction...........................................24

This guide ............................................................ 25

Safety icons ......................................................... 26

Other icons used............................................ 26

Your device’s features and specifications ..... 27

Documentation .................................................... 27

Service options .................................................... 27

Chapter 2: Getting Started......................................28

Selecting a place to work .................................... 28

Setting up your device......................................... 28

Connecting to a power source ............................ 29

Charging the main battery ................................... 31

Using the device for the first time........................ 31

Initial setup..................................................... 31

Setting up your software................................ 32

Registering your device with Toshiba.................. 32

To Shut down your device................................... 33

To Restart your device......................................... 33

To place your device in Sleep mode.................... 34

Adding optional external devices......................... 34

Adding memory ................................................... 35

20 Contents

5.375 x 8.375 ver 2.3

Recovering the Internal Storage Drive................. 35

Creating recovery media................................ 36

Restoring from recovery media...................... 38

Refresh your PC (with user’s data) ................ 40

Reset your PC................................................ 42

Installing drivers and applications.................. 45

Using the touch pad ............................................ 46

Adjusting touch pad settings ......................... 49

Disabling or enabling the touch pad.............. 49

Connecting an external device ............................ 50

Using external display devices ............................ 50

Selecting video cables................................... 50

Connecting an HDMI™-compatible

television or display device ...................... 51

Directing the display output when your

device is attached to the

keyboard dock ......................................... 51

Directing the display output when your

device is in tablet mode ........................... 52

Adjusting the quality of the external

display...................................................... 53

Customizing your device’s settings..................... 53

Caring for your device.......................................... 54

Cleaning the device ....................................... 54

Moving the device.......................................... 54

Chapter 3: Learning the Basics.............................. 55

Computing tips .................................................... 55

Attaching and Detaching the keyboard ............... 57

To Detach the tablet from the keyboard........ 57

To Attach the tablet to the keyboard ............. 58

Using the keyboard.............................................. 59

Function keys................................................. 59

Special Windows® keys ................................ 59

Backlit keyboard dock ......................................... 60

Touch screen ....................................................... 60

Touch screen navigation................................ 60

Mouse properties................................................. 62

Starting an app .................................................... 62

Contents

5.375 x 8.375 ver 2.3

Starting an app using Search ........................ 62

Saving your work ................................................. 63

Backing up your work.......................................... 63

Toshiba’s online resources .................................. 64

Chapter 4: Mobile Computing ................................65

Toshiba’s energy-saver design............................ 65

Running the device on battery power.................. 65

Battery Notice ................................................ 66

Power management....................................... 67

Charging batteries ............................................... 67

Charging the main battery ............................. 67

Charging the RTC battery .............................. 68

Monitoring battery power..................................... 69

Determining remaining battery power............ 71

What to do when the main battery runs

low............................................................ 71

Setting battery notifications ........................... 72

Conserving battery power ............................. 73

Power Plans ................................................... 74

Using the eco power plan.................................... 75

Changing the main battery................................... 75

Taking care of your battery.................................. 76

Safety precautions ......................................... 76

Maintaining your battery ................................ 76

Disposing of your device ..................................... 77

Traveling tips........................................................ 77

Chapter 5: Exploring Your Device’s Features .........79

Exploring the Start screen ................................... 79

Charms........................................................... 80

Tiles................................................................ 81

Exploring the desktop.......................................... 81

Finding your way around the desktop ........... 81

Windows® Store................................................... 83

Setting up for communications............................ 84

Connecting your device to a network ............ 85

Exploring audio features ...................................... 85

Recording sounds.......................................... 85

22 Contents

5.375 x 8.375 ver 2.3

Using external speakers or headphones ....... 86

Using the Web Cameras...................................... 87

Using the Memory card reader............................ 87

Inserting memory media ................................ 88

Removing memory media.............................. 88

Chapter 6: Utilities.................................................. 90

eco Utility® .......................................................... 91

Password Utility................................................... 92

Using a supervisor password ........................ 92

Using a user password .................................. 94

Deleting a user password .............................. 96

System Settings................................................... 97

Sleep Utilities ....................................................... 98

USB Sleep and Charge.................................. 98

Enabling/Disabling USB Sleep and

Charge.................................................... 100

Power supply mode settings ....................... 100

Function Key...................................................... 101

Recovery Media Creator.................................... 102

Service Station................................................... 102

TOSHIBA Application Installer ........................... 103

Chapter 7: If Something Goes Wrong .................. 104

Problems that are easy to fix ............................. 104

Problems when you turn on the device ............. 106

The Windows® operating system is not

working ........................................................ 107

Using Startup options to fix problems......... 108

Internet problems......................................... 110

The Windows® operating system can

help you.................................................. 111

Fixing a problem with Device Manager ............. 111

Checking device properties ......................... 111

Power and the batteries..................................... 112

Keyboard problems ........................................... 114

Touch pad problems.......................................... 114

Display problems ............................................... 114

Disk or storage drive problems.......................... 116

Contents

5.375 x 8.375 ver 2.3

Error-checking ............................................. 116

Sound system problems.................................... 118

Printer problems ................................................ 118

Wireless networking problems........................... 119

Develop good computing habits........................ 121

Data and system configuration backup in

the Windows® operating system............ 122

If you need further assistance............................ 127

Contacting Toshiba...................................... 127

Other Toshiba Internet Web sites ...................... 127

Toshiba’s worldwide offices .............................. 128

Appendix A: TOSHIBA Function Keys ..................129

Functions ........................................................... 129

Help file ........................................................ 130

Display brightness........................................ 130

Output (Display switch) ............................... 131

Disabling or enabling the touch pad ............ 132

Media buttons.............................................. 132

Volume Mute................................................ 133

Disabling or enabling wireless devices ........ 133

Backlit keyboard .......................................... 133

Zoom Function keys .................................... 134

Appendix B: Power Cord/Cable Connectors........135

Glossary..........................................................136

Index ...............................................................151

Introduction

Welcome to the world of powerful, portable, multimedia

computing. With your Toshiba device, your work and

entertainment can accompany you wherever you go.

This device is compatible with European Union Directive

2011/65/EU, Restriction of the use of certain Hazardous

Substances in electrical and electronic equipment

(RoHS), which restricts use of certain chemicals

including, but not limited to, lead, cadmium, mercury,

hexavalent chromium, PBB, and PBDE. Toshiba requires

its device component suppliers to meet RoHS

requirements and verifies its suppliers’ commitment to

meeting RoHS requirements by conducting component

sampling inspections during the product design approval

process.

NOTE

Introduction

This guide

5.375 x 8.375 ver 2.3

Certain Microsoft® software product(s) included with this

device may use technological measures for copy

protection. IN SUCH EVENT, YOU WILL NOT BE ABLE

TO USE THE PRODUCT IF YOU DO NOT FULLY

COMPLY WITH THE PRODUCT ACTIVATION

PROCEDURES. Product activation procedures and

Microsoft’s privacy policy will be detailed during initial

launch of the product, or upon certain reinstallations of

the software product(s) or reconfigurations of the device,

and may be completed by Internet or telephone (toll

charges may apply).

Some software may differ from its retail version (if

available), and may not include user manuals or all

program functionality.

The product specifications and configuration information

are designed for a product Series. Your particular model

may not have all the features and specifications listed or

illustrated. For more detailed information about the

features and specifications on your particular model,

please visit Toshiba’s Web site at support.toshiba.com.

While Toshiba has made every effort at the time of

publication to ensure the accuracy of the information

provided herein, product specifications, configurations,

prices, system/component/options availability are all

subject to change without notice. For the most

up-to-date product information about your device, or to

stay current with the various computer software or

hardware options, visit Toshiba’s Web site at

support.toshiba.com.

This guide

This guide introduces the device's features as well as some

basic procedures needed to perform tasks in

Windows 8.1. You can:

❖Read the entire guide from beginning to end.

❖Skim through and stop when a topic interests you.

❖Use the table of contents and the index to find specific

information.

NOTE

26 Introduction

Safety icons

5.375 x 8.375 ver 2.3

Safety icons

This manual contains safety instructions that must be

observed to avoid potential hazards that could result in

personal injuries, damage to your equipment, or loss of data.

These safety cautions have been classified according to the

seriousness of the risk, and icons highlight these instructions

as follows:

Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Provides important information.

Other icons used

Additional icons highlight other helpful or educational

information:

TECHNICAL NOTE: This icon indicates technical

information about the device.

HINT: This icon indicates helpful hints and tips.

DEFINITION: This icon indicates the definition of a term

used in the text.

NOTE

Introduction

Documentation

5.375 x 8.375 ver 2.3

Your device’s features and specifications

Certain device chassis are designed to accommodate all

possible configurations for an entire product Series. Your

select model may not have all the features and specifications

corresponding to all of the icons or switches shown on the

device chassis, unless you have selected all those features.

This information applies to all the features and icons

described in this guide.

Below are examples of some of the many possible icons

used on your device:

(Sample Illustration) System icons

Documentation

Your device comes with the following documentation:

❖An electronic version of the User’s Guide (this document)

❖A Quick Start document

❖It may also include other documentation

For accessory information, visit Toshiba’s Web site at

accessories.toshiba.com.

Service options

Toshiba offers a full line of service programs to complement

its standard limited warranty. Toshiba’s standard limited

warranty, extended warranty, and service upgrade terms and

conditions are available at warranty.toshiba.com.

To stay current on the most recent software and hardware

options for your device, and for other product information,

be sure to regularly check the Toshiba Web site at

support.toshiba.com.

If you have a problem or need to contact Toshiba, see “If

Something Goes Wrong” on page 104.

Chapter 1

Getting Started

This chapter provides tips for using your device effectively,

summarizes how to connect components, and explains what

to do the first time you use your device.

Please read the safety instruction information on the Quick

Start document (that shipped with your device) carefully and

make sure you fully understand the instructions before you

attempt to use your device in order to avoid potential

hazards that could cause bodily injury, property damage, or

damage the device.

Selecting a place to work

Your device is portable and designed to be used in a variety

of circumstances and locations.

Setting up your device

TECHNICAL NOTE: You must complete all setup steps

up to and including “Setting up your software” on

page 32 before adding external or internal components

to your device. These components include, but are not

limited to, a mouse, keyboard, and printer.

Your device contains a rechargeable main battery that needs

to be charged before you can use it.

Getting Started

Connecting to a power source

To use external power or to charge the battery you must

attach the AC adaptor. See “Connecting to a power source”

on page 29.

Please handle your device carefully to avoid scratching or

damaging the surface.

Connecting to a power source

Your device requires power to operate. Use the power

cord/cable and AC adaptor to connect the device to a live

electrical outlet, or to charge the device’s battery.

Never pull on a power cord/cable to remove a plug from

a socket. Always grasp the plug directly. Failure to follow

this instruction may damage the cord/cable, and/or result

in a fire or electric shock, possibly resulting in serious

injury.

Always confirm that the power plug (and extension cable

plug if used) has been fully inserted into the socket, to

ensure a secure electrical connection. Failure to do so

may result in a fire or electric shock, possibly resulting in

serious injury.

Be careful if you use a multiple connector. An overload on

one socket could cause a fire or electric shock, possibly

resulting in serious injury.

Always use the TOSHIBA AC adaptor that was provided

with your device, or use AC adaptors specified by

TOSHIBA to avoid any risk of fire or other damage to the

device. Use of an incompatible AC adaptor could cause

fire or damage to the device possibly resulting in serious

injury. TOSHIBA assumes no liability for any damage

caused by use of an incompatible adaptor.

NOTE

30 Getting Started

Connecting to a power source

To connect AC power to the device:

1Connect the power cord/cable to the AC adaptor.

Handling the cord on this product will expose you to

lead, a chemical known to the State of California to

cause birth defects or other reproductive harm.

Wash hands after handling.

2Plug the AC adaptor cord into the DC-IN located on the

back of the keyboard dock.

To locate your DC-IN port, please refer to your Quick

Start document.

3Connect the power cord/cable to a live electrical outlet.

The DC-IN charging indicator light on the indicator panel

glows.

Never attempt to connect or disconnect a power plug

with wet hands. Failure to follow this instruction could

result in an electric shock, possibly resulting in serious

injury.

The indicator light for the device’s main battery gives you

an indication of its current charge:

❖Glows amber while the main battery is charging

(AC adaptor connected)

❖Glows white when the main battery is fully charged

❖Is unlit when the main battery has discharged, the

battery is not charging, or the AC adaptor is not

plugged into the device or AC outlet

❖Flashes amber when the charge of the main battery

is low and it is time to recharge the main battery or

plug in the AC adaptor

If the DC-IN charging indicator light flashes amber during

charging, either the main battery is malfunctioning, or it is

not receiving correct input from the AC power supply.

NOTE

Getting Started

Charging the main battery

The device battery is not accessible by the user.

Before using the battery to power the device, you must

charge the battery.

To charge the battery, leave the device plugged into an AC

power source with the device turned off until the battery light

glows white. After that, the battery will be completely

charged and ready to power the device.

Battery life and charge time may vary depending on the

applications power management settings, and features

used.

Using the device for the first time

The device is now ready for you to turn it on and begin using

it, see “Exploring Your Device’s Features” on page 79.

When opening or closing the display panel/tablet, place

one hand on the palm rest to hold the device in place and

use the other hand to slowly open or close the display

panel/tablet.

To avoid damaging the display panel/tablet when

opening it, do not force it beyond the point where it

moves easily and never lift the device by the display

panel/tablet, when it is attached to the keyboard.

Do not press or push on the display panel/tablet and be

careful to remove any pens or other objects from the

keyboard area before closing the display panel/tablet.

Initial setup

The Startup screen is the first screen displayed when you

turn on your device for the first time. Follow the on-screen

instructions on each screen in order to properly install the

operating system and begin using your device.

NOTE

32 Getting Started

Registering your device with Toshiba

Setting up your software

When you turn on the device for the first time, do not turn

off the power again until the operating system has loaded

completely.

The names of windows displayed, and the order in which

windows appear, may vary according to your software

setup choices.

The first time you turn on your device, the setup guides you

through steps to set up your software. Follow the on-screen

instructions.

Registering your device with Toshiba

Product registration is strongly recommended, and allows

Toshiba to send you periodic updates, announcements, and

special offers applicable to your Product. Product

registration can be completed by one of three methods:

1From the Toshiba Web site at register.toshiba.com: Type

in the requested information and complete the

registration process.

2From the Start screen: Type Registration while in the

Start screen, locate and complete the registration

process.

3From the Desktop: Press the Windows® ( ) key to

display the Start screen. Click or touch the Search ()

icon at the upper-right corner of the screen and, in the

Search field, type Registration. In the list that appears,

click or touch Registration and complete the

registration process.

Failure to complete Product Registration will not diminish

your rights under the Toshiba Standard Limited Warranty.

To register online, an Internet connection is required.

NOTE

Getting Started

To Shut down your device

1Press the Windows® ( ) key to display the Start

screen.

Pressing the power button before shutting down the

Windows® operating system could cause you to lose

your work.

2Click or touch the Power ( ) icon at the upper-right

corner of the screen.

(Sample Image) Shut down

To perform a Hybrid shut down, (instead of performing a

Shut down), click or touch the Shut down option but do

NOT hold the Shift key.

3Highlight Shut down while holding the Shift key, and

then click or touch the Shut down option.

The device closes all open applications, shuts down the

operating system, and then turns off.

To Restart your device

1Press the Windows® ( ) key to display the Start

screen.

2Click or touch the Power ( ) icon at the upper-right

corner of the screen.

(Sample Image) Restart

Shut down option

NOTE

Restart option

34 Getting Started

To place your device in Sleep mode

3Highlight Restart, and then click or touch the Restart

option.

The device closes all open applications, and restarts the

operating system.

To place your device in Sleep mode

1Press the Windows® ( ) key to display the Start

screen.

If you power down using the Sleep command and the

battery discharges fully, your unsaved information will be

lost. Be sure to save your work first.

2Click or touch the Power ( ) icon at the upper-right

corner of the screen.

(Sample Image) Sleep

3Highlight Sleep, and then click or touch the Sleep

option.

Sleep mode saves the current state of the device to

memory so that, when you restart the device, you can

continue working from where you left off.

Adding optional external devices

Before adding external devices, Toshiba recommends

setting up your software. See “Setting up your software”

on page 32.

After starting your device for the first time you may want to:

❖Connect external devices (see “Connecting an external

device” on page 50)

❖Connect an external monitor (see “Using external

display devices” on page 50)

Sleep option

NOTE

Getting Started

Adding memory

Your computer comes with enough memory to run most of

today’s popular applications. Toshiba will not be responsible

for any product damage, data loss, service or part

replacement made necessary by improper installation of a

memory module.

Recovering the Internal Storage Drive

To purchase an optional external writable optical disc

drive, visit the Toshiba Web site at

accessories.toshiba.com.

Your device includes recovery utilities to allow you to recover

your internal storage drive if necessary.

The following internal storage drive recovery options are

available:

A recovery image of your device is stored on the internal

storage drive, and the image can be restored by running the

recovery utilities directly from your internal storage drive as

described in the sections below. However, it is strongly

recommended that you create recovery media. If the

recovery files on your internal storage drive become

corrupted or are deleted, you can restore your system from

your recovery media. Also, if your original internal storage

drive fails, you can restore your system to a new internal

Recovery option Description

Creating recovery

media This option allows you to create the recovery

media you will use to restore your device.

See “Creating recovery media” on page 36.

Restoring from

recovery media This option allows you to restore your system from

the recovery media you created.

See “Restoring from recovery media” on page 38.

Refresh your PC

(with user’s data) This option allows you to refresh your system

without losing your data.

See “Refresh your PC (with user’s data)” on

page 40.

Reset your PC This option allows you to remove all data from your

system and reinstall Windows®.

See “Reset your PC” on page 42.

NOTE

36 Getting Started

Recovering the Internal Storage Drive

storage drive from your recovery media. It is strongly

recommended that you create recovery media before using

your system for the first time. See “Creating recovery media”

on page 36 and “Restoring from recovery media” on

page 38.

❖During the recovery process your device must be

connected to an external power source via the AC

adaptor.

❖When you restore your system, only the operating

system files and drivers originally shipped with the

device are restored. Any files that you created are not

restored during this process. Be sure to separately

save the files you have created to external media

using Windows® or another backup program. For

more information, see “Backing up your work” on

page 63.

Creating recovery media

It is strongly recommended that you create recovery media.

If the recovery files on your internal storage drive become

corrupted or are deleted, you can restore your system from

your recovery media. Also, if your original internal storage

drive fails, you can restore your system to a new internal

storage drive from your recovery media.

During the recovery process your device must be

connected to an external power source via the AC

adaptor.

When you create recovery media, only the operating

system files and drivers originally shipped with the device

are backed up to the external media and can be restored

from this media. Any files that you created are not

backed up on the recovery media. You will need to

separately back up the files you created; for more

information, see “Backing up your work” on page 63.

NOTE

Getting Started

Recovering the Internal Storage Drive

When you create recovery media, the system will prompt you

to insert several blank DVDs or connect one or more USB

flash drives of a certain minimum capacity to your device.

The amount of space required for storing the recovery files

varies by device model. Follow the procedure below to

determine how much space you will need for storing your

system’s recovery files.

To create recovery media:

1From the Start screen begin typing Recovery Media

Creator and click or touch your selection. If you are in

the Desktop, press the Windows® ( ) key to display the

Start screen. Click or touch the Search ( ) icon at the

upper-right corner of the screen and, in the Search field,

type Recovery Media Creator. In the list that appears,

click or touch your selection.

The TOSHIBA Recovery Media Creator dialog box

displays.

(Sample Image) TOSHIBA Recovery Media Creator dialog box

An optional external writable optical disc drive must be

connected to your computer in order for the DVD option

to display in the dialog box.

2Select DVD or USB Flash from the drop-down list,

depending on the type of external media you want to

use.

NOTE

38 Getting Started

Recovering the Internal Storage Drive

3Check the “Information” area of the dialog box to

determine the number of DVDs you will need and/or the

minimum amount of storage space required for copying

your system’s recovery files to USB flash drive(s).

4Do one of the following:

❖If you are copying files to DVD, insert a blank DVD

into the optional external writable optical disc drive.

❖If you are copying files to a USB flash drive, connect

a USB flash drive of the required minimum capacity

(as specified in the TOSHIBA Recovery Media

Creator utility) to your device.

All information stored on your DVDs or USB flash drive(s)

will be erased during the process of creating the recovery

media. Be sure to save the information stored on your

external media to another storage device before

executing this procedure, or use blank media.

5Click or touch the Create button in the TOSHIBA

Recovery Media Creator utility dialog box.

6Follow the on-screen prompts to complete the copy

process.

If you are copying the recovery files to DVDs, be sure to

label each DVD in the set sequentially (for example, “1 of

3,” “2 of 3,” etc.), so that you will know in which order to

insert the discs during recovery.

For information on using the Recovery media you have

created with the preceding steps, see “Restoring from

recovery media” on page 38.

Restoring from recovery media

The recovery process deletes information stored on the

internal storage drive. Be sure to save your work to

external media before executing the recovery (see

“Backing up your work” on page 63).

NOTE

Getting Started

Recovering the Internal Storage Drive

During the recovery process your device must be

connected to an external power source via the AC

adaptor.

If you have created recovery media for your system, you can

restore your system from such media, if necessary. For

example, if your original internal storage drive fails, you can

restore your system to a new internal storage drive from your

recovery media. For instructions on creating recovery media,

see “Creating recovery media” on page 36.

When you restore your system, only the operating

system files and drivers originally shipped with the device

are restored. Any files that you created are not restored

during this process. Be sure to separately save the files

you have created to external media using Windows® or

another backup program. For more information, see

“Backing up your work” on page 63.

To recover your internal storage drive from recovery media:

1Make sure your device is turned off completely, see “To

Shut down your device” on page 33.

2Do one of the following:

❖If your recovery files are on DVDs, insert the first

recovery DVD into your optional external writable

optical disc drive.

❖If your recovery files are on a USB flash drive,

connect the USB flash drive to your device.

3Turn on your device while pressing the F12 key on your

keyboard.

The Boot menu displays.

4Using the arrow keys, select the DVD option or the USB

Flash option, depending on which type of media you are

using, and then press the ENTER key.

5A warning screen appears, stating that when the

recovery is executed all data on your internal storage

drive will be deleted and rewritten. Click or touch Yes to

continue.

NOTE

40 Getting Started

Recovering the Internal Storage Drive

6Follow the on-screen instructions to complete the

recovery process.

When the process is complete, a message displays

indicating that the drive has been recovered.

7Click or touch Finish to restart the device.

Refresh your PC (with user’s data)

Using “Refresh your PC” recovers your Windows®

installation to an earlier state while attempting to keep

your data and apps you installed from the Windows®

Store. Your PC settings and any Desktop Applications

installed from media or websites will be deleted. Toshiba

does not guarantee that your data will not be deleted

during the Refresh process. Please make a back up of

your data to external media before executing this

process. For more information, see “Backing up your

work” on page 63.

During the recovery process your device must be

connected to an external power source via the AC

adaptor.

You can recover the factory default software (refresh your

PC), while the device will attempt to back up your data using

the utilities stored on your device’s internal storage drive:

TECHNICAL NOTE: Your data will be copied into the

backup folder. All of the data will be moved to this folder

during the recovery process, however the current

directory structure will be retained.

1From the Start or Desktop screen, move your pointer to

the upper-right corner of the screen or swipe in from the

right edge.

2When the Windows® charms appear click or touch the

Settings ( ) charm.

NOTE

Getting Started

Recovering the Internal Storage Drive

3Click or touch Change PC Settings.

The PC settings window appears.

(Sample Image) PC settings screen

4Click or touch Update and recovery.

5Click or touch Recovery.

6Select Refresh your PC without affecting your files,

and click or touch Get Started.

The “Refresh your PC” screen appears.

(Sample Image) Refresh your PC screen

Toshiba does not guarantee successful data back up. Be

sure to save your work to external media before

executing the recovery (see “Backing up your work” on

page 63).

Getting Started

Recovering the Internal Storage Drive

3Click or touch Change PC Settings.

The PC settings window appears.

(Sample Image) PC settings screen

4Click or touch Update and recovery.

5Click or touch Recovery.

6Select Remove everything and reinstall Windows,

and click or touch Get Started.

The “Reset your PC” screen appears.

(Sample Image) Reset your PC screen

44 Getting Started

Recovering the Internal Storage Drive

7Click or touch the Next button.

The “Do you want to fully clean your drive?” screen

appears.

(Sample Image) Do you want to fully clean your drive screen

8Select one of the following options:

❖Just remove my files

❖Fully clean the drive

The “Ready to reset your PC” screen appears.

(Sample Image) Ready to reset your PC screen

9Click or touch the Reset button.

The “Resetting your PC” window appears. When the

process is complete your system will reboot your

Windows® operating system.

Getting Started

Recovering the Internal Storage Drive

Selecting the “Fully clean the drive” option may take

several hours.

Installing drivers and applications

The TOSHIBA Application Installer allows you to reinstall the

drivers and applications that were originally bundled with

your device.

You must have an Internet connection to reinstall

applications.

To reinstall drivers and applications:

1From the Start screen begin typing TOSHIBA

Application Installer and click or touch your selection.

If you are in the Desktop, press the Windows® ( ) key

to display the Start screen. Click or touch the Search

( ) icon at the upper-right corner of the screen and, in

the Search field, type TOSHIBA Application Installer.

In the list that appears, click or touch your selection.

(Sample Image) Installing drivers and applications

2Click or touch Next.

3Click or touch the item you want to install.

4Click or touch Install.

5Follow the on-screen prompts to complete the

installation process, see “TOSHIBA Application Installer”

on page 103.

NOTE

Search field

46 Getting Started

Using the touch pad

Some of the touch pad operations described in this

section are only supported in certain applications, and

only on certain models.

The touch pad driver is pre-installed on your device. If

this driver is removed, the touch pad and touch pad

buttons will not work. You will need to reinstall the touch

pad driver using the TOSHIBA Application Installer. For

more information, see “TOSHIBA Application Installer”

on page 103.

You can use the touch pad (the small, touch-sensitive area in

front of the keyboard) and the adjacent control buttons to:

❖Move the pointer on the screen

❖Select an item on the screen

❖Open or activate an item on the screen

❖Scroll through a document or information

❖Zoom in for a close-up view

❖Zoom out to see more information at once

(Sample Illustration) The touch pad and associated control

buttons

NOTE

Touch pad

Secondary control buttonPrimary control button

Getting Started

Using the touch pad

Refer to the table below for specific instructions on

performing each operation.

The

pointer

is the icon (usually an arrow) that moves on

the screen when you slide your finger across the touch

pad or move a mouse connected to your device.

To: Do the following: Example:

Move the on-

screen pointer Slide your finger across the touch

pad in the direction you want to

move the pointer.

To move the pointer a longer

distance, slide your finger several

times across the touch pad in the

preferred direction.

(Sample Illustration)

Pointer moves to the

right

Select an item 1Move the pointer to the item

you want to select.

2Do one of the following:

❖Tap the touch pad once

❖Press and release the

primary (left-hand)

control button

(Sample Illustration)

Tap once to select

Open or

activate an item 1Move the pointer to the item

you want to open/activate.

2Do one of the following:

❖Tap the touch pad twice

in rapid succession

❖Press and release the

primary control button

twice in rapid

succession

(Sample Illustration)

Tap twice to open

NOTE

48 Getting Started

Using the touch pad

Right-click an

item 1Move the pointer to the item

you want to right-click.

2Press and release the

secondary control button.

This feature varies by program.

Check your program

documentation for specific

instructions on right-clicking.

(Sample Illustration)

Click the secondary

(right-hand) control

button

Scroll vertically Slide two fingers along the right

edge of the touch pad in the

direction you want to scroll.

Repeat to scroll a longer

distance.

(Sample Illustration)

Vertical scrolling active

area

Scroll

horizontally Slide two fingers along the

bottom edge of the touch pad in

the direction you want to scroll.

Repeat to scroll a longer

distance.

(Sample Illustration)

Horizontal scrolling active

area

Zoom in/out To zoom in:

❖Place two fingers close

together on the touch

pad and then slide them

apart.

To zoom out:

❖Place two fingers

slightly apart on the

touch pad and then

slide them together.

(Sample Illustration)

Zooming in

(Sample Illustration)

Zooming out

To: Do the following: Example:

Learning the Basics

Attaching and Detaching the keyboard

You can attach or detach the device from the keyboard

dock. Detaching the keyboard allows you to use your device

in Tablet mode. While attached, you can use your device as

you would any laptop computer (Laptop mode).

(Sample Image) Attaching/detaching the keyboard

To Detach the tablet from the keyboard

Close all applications and save all unsaved files before

detaching the tablet from the keyboard. Do not

disconnect the tablet from the keyboard while an

application is running.

1Gently push the tablet down into the bracket.

(Sample Image) Detaching the keyboard

2Carefully pull the tablet straight up and out of the

bracket.

Tablet mode

58 Learning the Basics

Attaching and Detaching the keyboard

To Attach the tablet to the keyboard

1Align the guide on the keyboard to the Windows® button

on the tablet.

(Sample Image) Attaching the keyboard

2Gently press the tablet straight down into the bracket

until it clicks in place.

Screen orientation

When you rotate the device from portrait to landscape (or

vice versa), the screen orientation automatically changes

according to the rotation angle. To lock the screen so that

it does not rotate automatically, orient the device in the

desired screen rotation (portrait or landscape) and

perform the following steps.

1Move your pointer to the upper-right corner of the screen

or swipe in from the right edge.

2When the Windows® charms appear, click or touch the

Settings ( ) charm.

3Click or touch the Screen icon.

4Click or touch the Auto-rotate icon.

Laptop mode

NOTE

Specyfikacje produktu

Marka:	Toshiba
Kategoria:	Zeszyt
Model:	Satellite Click 2 Pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Toshiba Satellite Click 2 Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Zeszyt Toshiba

Toshiba Satellite P70-B Instrukcja

16 Stycznia 2025

Toshiba Satellite L675 Instrukcja

4 Lipca 2024

Toshiba Satellite C40-C Instrukcja

4 Lipca 2024

Toshiba Satellite L70-A Instrukcja

4 Lipca 2024

Toshiba Satellite S40 Instrukcja

4 Lipca 2024

Toshiba Satellite L70t Instrukcja

4 Lipca 2024

Toshiba Satellite S70-B Instrukcja

4 Lipca 2024

Toshiba Satellite A660 Instrukcja

4 Lipca 2024

Toshiba Satellite C55 Instrukcja

4 Lipca 2024

Toshiba Satellite S70Dt Instrukcja

4 Lipca 2024

Instrukcje Zeszyt

Najnowsze instrukcje dla Zeszyt

Acer AOA 110 Instrukcja

15 Stycznia 2025

MSI cr620 002nl Instrukcja

12 Stycznia 2025

MSI CR670 Instrukcja

12 Stycznia 2025

MSI CX 700 Instrukcja

12 Stycznia 2025

Lenovo ideapad 130S Instrukcja

11 Stycznia 2025

Acer Aspire 5737Z Instrukcja

19 Grudnia 2024

Packard Bell EasyNote TX Instrukcja

5 Października 2024

Packard Bell Easynote LX Instrukcja

5 Października 2024

Acer Aspire 1670 Instrukcja

28 Września 2024

Fujitsu Siemens AMILO Li 1818 Instrukcja

27 Września 2024