Instrukcja obsługi Toshiba Satellite 2455
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Toshiba Satellite 2455 (159 stron) w kategorii laptop. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/159
TOSHIBA C6634-0103M1
Satellite® 2455 Series
User’s Guide
If you need assistance:
InTouch® Center
Calling within the United States (800) 457-7777
Calling from outside the United States (949) 859-4273
For more information, see “If Something Goes Wrong” on
page 223 in this guide.
2
Model: Satellite 2455 Series
ReWritable CD/DVD Drives
The computer system you purchased may include a ReWritable CD and/or
DVD drive(s), among the most advanced data storage technologies
available. As with any new technology, you must read and follow all set-up
and usage instructions in the applicable user guides and/or manuals
enclosed. If you fail to do so, this product may not function properly and
you may lose data or suffer other damage. TOSHIBA AMERICA
INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND
SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE
PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU
AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS
SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR
LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR
REMOVABLE STORAGE MEDIA ARISING OUT OF OR
RESULTING FROM THE USE OF THE PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY THEREOF.
Protection of Stored Data
For your important data, please make periodic back-up copies of all the
data stored on the hard disk or other storage devices as a precaution against
possible failures, alteration, or loss of the data. IF YOUR DATA IS
ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR
MALFUNCTION OF THE HARD DISK DRIVE OR OTHER
STORAGE DEVICES AND THE DATA CANNOT BE
RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY
DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE
RESULTING THEREFROM. WHEN COPYING OR
TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM
WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR
TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR
THE FAILURE TO COPY OR TRANSFER THE DATA
CORRECTLY.
Critical Applications
The computer you have purchased is not designed for any “critical
applications.” “Critical applications” means life support systems, medical
applications, connections to implanted medical devices, commercial
transportation, nuclear facilities or systems or any other applications where
product failure could lead to injury to persons or loss of life or catastrophic
property damage. ACCORDINGLY, TOSHIBA, ITS AFFILIATES
AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY
3
ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN
ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER
PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT
TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.
FCC Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
❖Reorient or relocate the receiving antenna.
❖Increase the separation between the equipment and receiver.
❖Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
❖Consult the dealer or an experienced radio/TV technician for help.
NOTE: Only Peripherals complying with the FCC Class B limits may be attached
to this equipment. Operation with noncompliant peripherals or peripherals not
recommended by Toshiba is likely to result in interference to radio and TV
reception. Shielded cables must be used between the external devices and the
computer's or expansion unit's serial port, parallel port, monitor port, USB port,
PS/2 port®, i.LINK® port and microphone jack. Changes or modifications made
to this equipment not expressly approved by Toshiba or parties authorized by
Toshiba could void the user's authority to operat
e the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
❖This device may not cause harmful interference.
❖This device must accept any interference received, including
interference that may cause undesired operation.
4
Contact:
Toshiba America Information Systems, Inc.
9740 Irvine Blvd.
Irvine, CA 92618-1697
(949) 583-3000
Industry Canada Requirement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme NMB-003
du Canada.
FCC Requirements
The following information is pursuant to FCC CFR 47, Part 68 and refers
to internal modems.
Installation
When you are ready to install or use the modem, call your local telephone
company and give them the following information:
❖The telephone number of the line to which you will connect the
modem.
❖The FCC registration number of the modem.
❖The ringer equivalence number (REN) of the modem, which is 0.6B.
The modem connects to the telephone line by means of a standard jack
called the USOC RJ11C.
Type of Service
Your modem is designed to be used on standard-device telephone lines.
Connection to telephone company-provided coin service (central office
implemented systems) is prohibited. Connection to party lines service is
subject to State tariffs. If you have any questions about your telephone line,
such as how many pieces of equipment you can connect to it, the telephone
company will provide this information upon request.
Telephone Company Procedures
The goal of the telephone company is to provide you with the best service it
can. In order to do this, it may occasionally be necessary for them to make
changes in their equipment, operations or procedures. If these changes
might affect your service or the operation of your equipment, the telephone
5
company will give you notice, in writing, to allow you to make any
changes necessary to maintain uninterrupted service.
If Problems Arise
If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to
the telephone network. If the telephone company notes a problem, they
may temporarily discontinue service. When practical, they will notify you
in advance of this disconnection. If advance notice is not feasible, you will
be notified as soon as possible. When you are notified, you will be given
the opportunity to correct the problem and informed of your right to file a
complaint with the FCC. In the event repairs are ever needed on your
modem, they should be performed by Toshiba Corporation, Toshiba
America Information Systems, Inc. or an authorized representative of
Toshiba.
Disconnection
If you should ever decide to permanently disconnect your modem from its
present line, please call the telephone company and let them know of this
change.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful to use
a computer or other electronic device to send any message via a telephone
fax machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the
date and time it is sent and an identification of the business, other entity or
individual sending the message and the telephone number of the sending
machine or such business, other entity or individual.
In order to program this information into your fax modem, you should
complete the setup for your fax software before sending a message.
Instructions for IC CS-03 certified equipment
1NOTICE: The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Department does not
guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. The customer should be
6
aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
Caution: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
2The user manual of analog equipment must contain the equipment’s
Ringer Equivalence Number (REN) and an explanation notice similar
to the following:
The Ringer Equivalence Number (REN) of this device can be found
on the label affixed to your computer.
NOTICE: The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number of
terminals allowed to be connected to a tele
phone interface. The
termination on an interface may consist of any combination of devices
subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
3The standard connecting arrangement (telephone jack type) for this
equipment is jack type(s): USOC RJ11C.
Wireless Interoperability
The TOSHIBA Wireless LAN Mini PCI Card products are designed to be
interoperable with any wireless LAN product that is based on Direct
Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:
❖The IEEE 802.11 Standard on Wireless LANs (Revision A/B), as defined
and approved by the Institute of Electrical and Electronics Engineers.
❖The Wireless Fidelity(WiFi) certification as defined by the WECA
Wireless Ethernet Compatibility Alliance.
Caution
BluetoothTM and Wireless LAN devices operate within the same radio
frequency range and may interfere with one another. If you use Bluetooth
TM
and Wireless LAN devices simultaneously, you may occasionally
7
experience a less than optimal network performance or even lose your
network connection.
If you should experience any such problem, immediately turn off either one
of your BluetoothTM or Wireless LAN.
Please contact Toshiba PC product support on web site
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or
http://pcsupport.toshiba.com in the United States for more information.
Caution
This device is restricted to indoor use due to its operation in the 5.15 to
5.85 GHz frequency range.
Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by Wireless LAN
devices however is far much less than the electromagnetic energy emitted
by wireless devices like for example mobile phones.
Because Wireless LAN products operate within the guidelines found in
radio frequency safety standards and recommendations, TOSHIBA
believes Wireless LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
In some situations or environments, the use of Wireless LAN may be
restricted by the proprietor of the building or responsible representatives of
the organization. These situations may for example include:
❖Using the Wireless LAN equipment on board of airplanes, or
❖In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices
in a specific organization or environment (e.g. airports), you are
encouraged to ask for authorization to use the Wireless LAN device prior
to turning on the equipment.
Regulatory Information
The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in
strict accordance with the manufacturer’s instructions as described in the
user documentation that comes with the product. This device complies with
the following radio frequency and safety standards.
9
België/
Belgique:
For outdoor usage only channel 10 (2457 MHz) and 11 (2462
MHz) is allowed.
For private usage outside buildings across public grounds
over less than 300m no special registration with IBPT/BIPT is
required. Registration to IBPT/BIPT is required for private
usage outside buildings across public grounds over more than
300m. An IBPT/BIPT license is required for public usage out-
side building.
For registration and license please contact IBPT/BIPT.
Gebruik buiten gebouw alleen op kanalen 10 (2457 MHz) en
11 (2462 MHz). Voor privé-gebruik buiten gebouw over pub-
lieke groud over afstand kleiner dan 300m geen registratie bij
BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m
is wel registratie bij BIPT/IBPT nodig. Voor publiek gebruik
buiten gebouwen is licentie van BIPT/IBPT verplicht. Voor
registratie of licentie kunt u contact opnemen met BIPT.
L’utilisation en extérieur est autorisé sur le canal 10 (2457
MHz) et 11 (2462 MHz).
Dans le cas d’une utilisation privée, a l’extérieur d’un bâti-
ment, au-dessus d’un espace public, aucun enregistrement
n’est nécessaire pour une distance de moins de 300m. Pour
une distance supérieure à 300m un enregistrement auprés de
I’IBPT est requise. Pour une utilisation publique à I’extérieur
de bâtiments, une licence de I’IBPT est requise. Pour les
enregistrements et licences, veuillez contacter I’IBPT.
Deutschland: License required for outdoor installations. Check with reseller
for procedure to follow
Anmeldung im Outdoor-Bereich notwendig, aber nicht gene-
hmigungspflichtig.Bitte mit Händler die Vorgehensweise
abstimmen.
10
USA-Federal Communications Commission (FCC)
This device complies with Part 15 of FCC Rules. Operation of the devices
in a Wireless LAN System is subject to the following two conditions:
❖This device may not cause harmful interference.
❖This device must accept any interference that may cause undesired
operation.
TOSHIBA is not responsible for any radio or television interference caused
by unauthorized modification of the devices included with this TOSHIBA
Wireless LAN Mini PCI Card, or the substitution or attachment of
connecting cables and equipment other than specified by TOSHIBA.
The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
Caution: Exposure to Radio Frequency Radiation
The Toshiba Wireless LAN Mini PCI Card will be installed with one of two
types of antennas. The both of antenna types, when installed are located at
the upper edge of the LCD screen.
France: Restricted frequency band: only channels 10 and 11 (2457
MHz and 2462 MHz respectively) may be used in France.
License required for every installation, indoor and outdoor
installations. Please contact ART for procedure to follow.
Bande de fréquence restreinte : seuls les canaux 10 à 11 (2457
et 2462 MHz respectivement) doivent être utilisés en France.
Toute utilisation, qu’elle soit intérieure ou extérieure, est
soumise à autorisation. Vous pouvez contacter I’Autorité de
Régulation des Télécommuniations (http://www.art-tele-
com.fr) pour la procédure à suivre.
Italia: License required for indoor use. Use with outdoor installa-
tions not allowed
E’necessaria la concessione ministeriale anche per l’uso
interno.
Verificare con i rivenditori la procedura da seguire. L’uso per
installazione in esterni non e’ permessa.
Nederland: License required for outdoor installations. Check with reseller
for procedure to follow
Licentie verplicht voor gebruik met buitenantennes. Neem
contact op met verkoper voor juiste procedure
11
For both antennas, the radiated output power of the TOSHIBA Wireless
LAN Mini PCI Card is far below the FCC radio frequency exposure limits.
Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in
such a manner that the potential for human contact during normal operation
is minimized. In normal operating configuration, the LCD in the upright
position, the distance between the antenna and the user should not be less
than 20cm. The antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Antenna(s) used in 5.15-5.25GHz frequency band must be integral antenna
which provide no access to the end user.
Refer to the Regulatory Statements as identified in the documentation that
comes with those products for additional information.
Relevant transmitters include FCC IDs: CJ6UPA3233WL,
CJ6UPA3232BT.
The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s website www.hc-sc.gc.ca/rpb.
Caution: Radio Frequency Interference Requirements
This device is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range. FCC requires this product to be used indoors
for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/or damage this device.
Taiwan
The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.
Article 14 Unless approved, for any model accredited low power radio
frequency electric machinery, any company, trader or user
shall not change the frequency, increase the power or change
the features and functions of the original design.
Article 17 Any use of low power radio frequency electric machinery shall
not affect the aviation safety and interfere with legal
communications. In event that any interference is found, the
use of such electric machinery shall be stopped immediately,
and reusing of such products can be resumed until no interfer-
ence occurs after improvement.
12
Low power radio frequency electric machinery shall resist against
interference from legal communications or from industrial, scientific and
medical radio emission electric machinery.
Using this equipment in Japan
In Japan, the frequency bandwidth of 2,400.2,483.5MHz for second
generation low-power data communication systems su
ch as this equipment
overlaps that of mobile object identification systems (premises radio
station and specified low-power radio station).
1. Sticker
Please put the following sticker on devices incorporating this product.
2. Indication
The indication shown below appears on this equipment.
1 2.4 this equipment uses a frequency of 2.4GHz.
2 DS.This equipment uses DS-SS modulation.
3 4.The interference range of this equipment is less than 40m.
4 This equipment uses a frequency bandwidth from
2,400MHz to 2,483.5MHz.
It is possible to avoid the band of mobile object identification systems.
3. TOSHIBA Direct PC
Monday – Friday: 10:00 – 17:00
Toll Free Tel: 0120-13-1100
Direct Dial: 03-3457-5916
Fax: 03-5444-9450
13
Device Authorization
This device obtains the Technical Regulation Conformity Certification and
the Technical Conditions Compliance Approval, and it belongs to the
device class of radio equipment of low-power data communication system
radio station stipulated in the Radio Law and the Telecommunications
Business Law of Japan.
The Name of the radio equipment: PA3232U-1MPC
TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018,
03GZDA0017
The following restrictions apply:
❖Do not disassemble or modify the device.
❖Do not install the embedded wireless module into other device.
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference by one or more of
the following measures:
❖Reorient or relocate the receiving antenna.
❖Increase the distance between the equipment and the receiver.
❖Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
❖Consult the dealer or an experienced radio/TV technician for help.
Toshiba is not responsible for any radio or television interference caused by
unauthorized modification of the devices included with this Toshiba
Wireless LAN Mini PCI Card, or the substitution or attachment of
connecting cables and equipment other than specified by Toshiba.
The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
14
Approved Countries for use
This equipment is approved to the radio standard by the countries in Fig.1.
Fig. 1.
Caution: Do not use this equipment except in the countries in Fig.1.
Caution: Bluetooth and Exposure to Radio Frequency Radiation
The radiated output power of the Bluetooth
TM Card from Toshiba is far
below FCC radio frequency exposure limits. Nevertheless, the Bluetooth
card shall be used in such a manner that the potential for human contact
during normal operation is minimized. In order to comply with FCC radio
frequency radiation exposure guidelines for an uncontrolled environment,
the Bluetooth Card has to be operated with the user maintaining a
minimum distance of 20 cm from the antennas located on top of the LCD
when the display is raised to its normal operating position. Refer to the
Regulatory Statements as identified in the documentation that comes with
those products for additional information. No other transmitter may be co-
located with this device except FCC ID# CJ6PA3070WL or
CJ6PA3171WL.
CD-ROM, DVD-ROM, Multi-function Drive Safety
Instructions
CD-ROM, DVD-ROM and multi-function drives employ a laser system.
To ensure proper use of this product, please read this instruction manual
carefully and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
Australia Austria Belgium
Canada Denmark Finland
France Germany Greece
Iceland Ireland Italy
Japan Luxembourg Mexico
Netherlands New Zealand Norway
Poland Portugal Spain
Sweden Switzerland UK
USA
15
To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
(Sample shown below. Location of the label and manufacturing
information may vary.)
CAUTION: This appliance contains a laser system and is classified as a “CLASS 1
LASER PRODUCT.” To use this model properly, read the instruction manual
carefully and keep it for your future reference. In case of any trouble with this
model, please contact your nearest “AUTHORIZED service station.” To prevent
direct exposure to the laser beam, do not try to open the enclosure.
Use of controls or adjustments or performance of procedures other than those
specified in the owner’s manual may result in hazardous radiation exposure.
Copyright
This guide is copyrighted by Toshiba America Information Systems, Inc.
with all rights reserved. Under the copyright laws, this guide cannot be
reproduced in any form without the prior written permission of Toshiba. No
patent liability is assumed, however, with respect to the use of the
information contained herein.
©2003 by Toshiba America Information Systems, Inc. All rights reserved.
Export Administration Regulation
This document contains technical data that may be controlled under the
U.S. Export Administration Regulations, and may be subject to the
approval of the U.S. Department of Commerce prior to export. Any export,
17
All other brand and product names are trademarks or registered trademarks
of their respective companies.
Computer Disposal Information
This product contains mercury. Disposal of this material may be regulated
due to environmental considerations. For disposal, reuse or recycling
information, please contact your local government or the Electronic
Industries Alliance at www.eiae.org.
18
Contents
Introduction ..............................................................27
This guide .............................................................. 27
Safety icons ........................................................... 28
Other icons used.............................................. 29
Other documentation ............................................. 29
Service options ...................................................... 30
Chapter 1: Finding Your Way Around ........................ 31
Making sure you have everything .......................... 31
Front with the display closed ................................. 32
Back....................................................................... 33
Right side............................................................... 34
Left side................................................................. 35
Front with the display open.................................... 37
Keyboard indicator lights ................................. 39
System indicator panel .................................... 40
CD/DVD control buttons .................................. 41
Underside .............................................................. 42
Chapter 2: Getting Started......................................... 43
Selecting a place to work ....................................... 43
19
Contents
Creating a computer-friendly environment....... 43
Keeping yourself comfortable .......................... 44
Precautions...................................................... 47
Setting up your computer ...................................... 49
Setting up your software.................................. 49
Registering your computer with Toshiba ......... 50
Adding external devices ................................... 51
Connecting an optional external
USB diskette drive........................................... 52
Connecting to a power source ............................... 52
Charging the main battery...................................... 55
Using the computer for the first time..................... 56
Opening the display panel................................ 56
Turning on the power....................................... 56
Activating the power-on password................... 57
Using the TouchPad™........................................ 58
Installing additional memory (optional) ................. 60
Removing a memory module........................... 66
Connecting an optional Slim SelectBay module..... 69
Hot swapping an optional
Slim SelectBay module ............................. 69
Installing and locking an optional
Slim SelectBay module ............................. 69
Removing an optional
Slim SelectBay module ............................. 71
Connecting a mouse .............................................. 74
Connecting a printer .............................................. 74
Connecting a USB printer................................. 74
Connecting a parallel printer ............................ 74
Setting up a printer ................................................ 75
Using the Add Printer Wizard........................... 75
Powering off the computer .................................... 77
Caring for your computer...................................... 78
Cleaning the computer..................................... 78
20 Contents
Moving the computer....................................... 79
Using a computer lock ..................................... 79
Chapter 3: Learning the Basics ................................. 81
Computing tips ...................................................... 81
Using the keyboard ................................................ 83
Character keys ................................................. 83
Ctrl, Fn, and Alt keys ........................................ 83
Function keys................................................... 84
Windows® special keys.................................... 84
Overlay keys..................................................... 85
Emulating a full-size keyboard ............................... 86
TOSHIBA Console button....................................... 87
Starting a program................................................. 87
Saving your work................................................... 87
Printing your work ................................................. 88
Using diskettes ...................................................... 89
Inserting and removing diskettes..................... 89
Caring for diskettes.......................................... 89
Backing up your files ............................................. 90
Playing a CD or DVD .............................................. 91
Components .................................................... 92
CD/DVD and Digital audio modes .................... 93
Inserting a disc ................................................ 93
Playing an audio CD......................................... 96
Playing a DVD.................................................. 98
Viewing the contents of a CD or DVD............... 98
Removing a disc with the computer on............ 98
Removing a disc with the computer off ........... 99
Caring for CDs and DVDs................................. 99
Using the DVD-ROM or multi-function drive........ 100
Setting up for communications............................ 100
Connecting the modem to a phone line.......... 101
Connecting your computer to a network........ 101
21
Contents
Powering down the computer.............................. 102
Turn Off or Shut down command................... 102
Restart command .......................................... 103
Hibernation command ................................... 103
Standby command......................................... 104
Using Turn Off or Shut down ............................... 104
Turning off or shutting down more quickly .... 106
Starting again after Turn Off or Shut down .... 108
Using Hibernation ................................................ 108
Enabling the Hibernation command............... 109
Going into Hibernation mode ......................... 110
Going into Hibernation mode more quickly.... 111
Starting again from Hibernation..................... 114
Using Standby ..................................................... 115
Going into Standby mode more quickly ......... 116
Starting again from Standby .......................... 119
Toshiba’s online resources................................... 119
Chapter 4: Mobile Computing ................................. 120
Toshiba’s energy-saver design ............................. 120
Running the computer on battery power ............. 121
Power management ....................................... 122
Charging the battery ............................................ 122
Charging the RTC battery............................... 124
Monitoring battery power .................................... 124
Determining remaining battery power............ 125
Conserving battery power.............................. 126
What to do when the battery runs low ........... 126
Setting battery alarms.................................... 127
Changing the main battery ................................... 128
Removing the battery from the computer ...... 128
Installing the battery ...................................... 130
Taking care of your battery................................... 131
Maximizing battery life................................... 132
22 Contents
Disposing of used batteries safely ....................... 133
Traveling tips........................................................ 133
Chapter 5: Getting to Know the Windows® XP
Operating System...... ........ 135................
Lesson 1: Exploring the desktop.......................... 136
Finding your way around the desktop ............ 136
Windows® XP file system .............................. 138
Lesson 2: Using the TouchPad
and control buttons together ....................... 139
Lesson 3: Learning about the Internet ................. 142
Lesson 4: Creating a new document .................... 143
Lesson 5: Creating a new folder........................... 144
Lesson 6: Starting programs ............................... 145
Lesson 7: Resizing, repositioning,
and hiding windows...................................... 147
Using the taskbar........................................... 148
Minimizing and maximizing windows ............ 148
Resizing and moving windows....................... 149
Lesson 8: Closing programs ............................... 151
Lesson 9: Creating shortcuts ............................... 151
Creating a shortcut to the Calculator.............. 151
Creating a shortcut to the Character Map ...... 152
Lesson 10: Changing the screen saver................. 154
Lesson 11: Setting the date and time................... 156
Lesson 12: Removing objects from the desktop.. 157
Lesson 13: Using System Restore ....................... 159
Lesson 14: If I am lost, what do I do? ................. 160
Windows® XP Help and Support Center ........ 160
Using the online tours and tutorials ............... 162
Lesson 15: Turning off your computer................. 163
Chapter 6: Exploring Your Options.......................... 165
Windows® XP special features............................. 165
23
Contents
Personalizing your desktop.................................. 166
Customizing the taskbar ................................ 166
Bringing the world to your desktop................ 167
Changing desktop and browsing style ........... 168
Personalizing individual windows .................. 169
Customizing window toolbars........................ 170
Displaying information about each folder ...... 171
Using your computer at the office........................ 172
Setting up for communications...................... 173
Connecting the modem to a telephone line .... 174
Setting up a dial-up connection ..................... 174
Exchanging data with another computer.............. 175
Transferring files
using a parallel port connection.............. 175
Getting help transferring files......................... 176
Setting up a wireless connection ................... 176
Accessing the wireless modules
using your system tray ........................... 176
Connecting to the Internet ................................... 176
An overview of using the Internet ........................ 178
The Internet ................................................... 178
The World Wide Web ..................................... 178
Internet Service Providers.............................. 179
Signing up with an Internet Service Provider 179
Surfing the Internet........................................ 179
Internet features............................................. 180
Uploading and downloading files
on the Internet ........................................ 180
Exploring video features ...................................... 181
Connecting a TV to your computer ................ 181
Display settings hot key ................................ 182
Exploring audio features ...................................... 183
Recording sounds.......................................... 183
Using a microphone....................................... 183
24 Contents
Adjusting recording settings .......................... 184
Using external speakers or headphones......... 185
Connecting a monitor, keyboard and mouse........ 185
Changing the display properties setting............... 186
Directing the display output
when you turn on the computer.............. 187
Adjusting the quality of the external display... 187
Display limitations ......................................... 188
Using PC Cards.................................................... 189
PC Card supporting software ......................... 189
Inserting a PC Card........................................ 189
Removing a PC Card...................................... 190
Hot swapping a PC Card ................................ 191
Using SD cards .................................................... 192
Inserting an SD card ...................................... 192
Removing an SD card .................................... 193
Chapter 7: Toshiba Utilities ..................................... 194
TOSHIBA Accessibility ......................................... 194
Fn-esse ................................................................ 195
Starting Fn-esse............................................. 196
Assigning a key to a program or document ... 197
Viewing existing key assignments.................. 199
Changing or removing
existing key assignments........................ 199
Hotkey utility........................................................ 199
TOSHIBA Console ................................................ 200
Customize Your Computer ............................. 201
Security.......................................................... 202
Power Management ....................................... 202
TOSHIBA Button Controls .............................. 205
Toshiba Hardware Setup ................................ 206
25
Contents
Chapter 8: WinDVD™................................................ 209
Playing DVDs....................................................... 209
Using the WinDVD slider bar (location) ......... 211
Using the WinDVD control panel.......................... 212
Using the control panel playback buttons ...... 213
Maximizing the video window........................ 217
Using WinDVD advanced features........................ 218
Using playlists ..................................................... 218
Creating a Playlist .......................................... 219
Playing a Playlist............................................ 220
Getting Help ......................................................... 222
Exiting WinDVD ................................................... 222
Chapter 9: If Something Goes Wrong ..................... 223
Problems that are easy to fix ............................... 223
Problems when you turn on the computer........... 225
The Windows® operating system is not working . 226
Using Startup options to fix problems ........... 227
Internet problems .......................................... 228
The Windows® XP operating system
can help you ........................................... 228
Resolving a hardware conflict.............................. 229
A plan of action.............................................. 229
Resolving hardware conflicts on your own .... 230
Fixing a problem with Device Manager .......... 232
Memory module problems............................. 233
Power and the batteries ................................. 234
Keyboard problems........................................ 236
Display problems ........................................... 236
Disk drive problems....................................... 238
Slim SelectBay problems ............................... 241
DVD-ROM or multi-function drive problems.. 241
Sound system problems................................ 248
PC Card problems.......................................... 249
27
Introduction
Welcome to the world of powerful and portable multimedia
computers! With your new Toshiba notebook computer, your
access to information can accompany you wherever you go.
You will find your operating system, Microsoft® Windows® XP
already installed on your computer. Your operating system offers
exciting features and easy Internet access.
This guide contains information about your operating system and
how it functions with your Toshiba computer. For specific
information on the software, see the Microsoft booklet that
shipped with your computer.
This guide
This guide introduces the computer’s features. You can:
❖Read the entire guide from beginning to end.
❖Skim through and stop when a topic interests you.
❖Use the table of contents and the index to find specific
information.
29
Introduction
Other documentation
Other icons used
Additional icons highlight other helpful or educational
information:
TECHNICAL NOTE: This icon highlights technical information
about the computer.
HINT: This icon denotes helpful hints and tips.
DEFINITION: This icon indicates the definition of a term used in
the text.
Other documentation
Your computer comes with the following documentation:
❖This electronic version of the user’s guide.
❖Guides for other programs that may come preinstalled on
your computer and for additional programs on your Recovery
CDs.
❖For accessory information, visit Toshiba’s Web site at
toshiba.com.
❖The Microsoft® Windows® operating system documentation,
which explains the features of the operating system.
30 Introduction
Service options
Service options
Toshiba offers a full line of service options built around its
SelectServTM warranty programs. For more information, visit
Toshiba’s Web site at toshiba.com.
If you have a problem or need to contact Toshiba, see “If
Something Goes Wrong” on page 223.
31
Chapter 1
Finding Your Way
Around
This chapter presents a “grand tour” of your notebook
computer. It serves as a reference when you need to locate
specific parts of the computer.
Making sure you have everything
Before doing anything else, consult the Quick Start card
provided with your system to make sure you received
everything. If any items are missing or damaged, notify your
dealer immediately. For additional help, see “If you need
further as stan e” on pagesi c 255.
32 Finding Your Way Around
Front with the display closed
Front with the display closed
The CD/DVD control buttons allow you to play audio CDs
when the computer is turned off. You can also use them to
play CDs and DVDs with the computer turned on. For a
description of these controls, see “CD/DVD control buttons”
on page 41.
The display latch keeps the display panel closed and locked.
To open the display panel, slide the display latch and raise the
panel.
The system indicator panel is a series of lights that glow
when certain functions are being performed by the system.
For more information, see “System indicator panel” on
page 40.
The volume control dial lets you adjust how loud the sound
is on your computer. To turn the volume up, turn the dial to
the right. To turn the volume down, turn the dial to the left.
Display latch
Volume
CD/DVD
control
buttons
CD/DVD
control
buttons
System
indicator
panel
control
dial
33
Finding Your Way Around
Back
Back
The DC-IN is where you plug in the AC adapter for either
operating the computer on external power or charging the
battery.
The LAN active indicator glows orange when data is being
exchanged between the computer and the LAN (local area
network).
The Network port (RJ45 jack) provides access to a LAN via
a standard Ethernet® network cable.
The Link indicator glows green when the computer is
connected to a LAN and the LAN is functioning properly.
The USB (Universal Serial Bus) ports allow you to connect
USB peripherals to your computer.
DEFINITION: USB is a peripheral expansion standard. USB
peripherals have a single standard for cabling and connectors. The
USB standard allows hot swapping of peripherals.
The S-video port allows you to play DVD audio and video
on a projector or TV that accepts audio/video inputs. For
more information, see “Connecting a TV to your computer”
on p ge a 181.
USBDC-IN Cooling vents
Network
Parallel port
port
ports
S-video
port RGB
(monitor)
port
i.LINK
port
LAN active indicator
Link indicator
Ether
Ether
35
Finding Your Way Around
Left side
The SD (Secure Digital) card slot holds a highly secure,
stamp-size flash memory card. The card can be used with a
variety of digital I/O (input/output) products: digital music
players, cellular phones, PDAs, digital cameras, digital video
camcorders, etc.
The SD card LED glows when the SD card is in use.
The modem port lets you use a standard RJ11 telephone
cable to connect the modem directly to a standard telephone
line. For more information, see “Connecting the modem to a
p o e lin ” on p geh n e a 101.
The Slim SelectBay® lets you use one of several optional
Slim SelectBay modules. For more information, see
“Connecting an optional Slim SelectBay module” on
page 69.
Left side
Cooling vents
Security PC Card USB Infrared port
Wireless antenna
on-off switch
Wireless antenna LED
lock slots
PC Card
ejection
tabs port
36 Finding Your Way Around
Left side
The cooling vents prevent the computer’s central processing
unit (CPU) from overheating so that it can continue to
perform at its maximum speed.
CAUTION: To prevent possible overheating of the CPU, make sure
you don’t block the cooling vents.
The security lock slot allows you to attach an optional
PORT- Noteworthy® computer lock cable to your computer
to secure it to a large, heavy object such as your desk.
The two stacked PC Card slots support up to two Type II PC
Cards, or one Type III PC Card. See “Using PC Cards” on
page 189 for more information.
The PC Card ejection tabs release the PC Cards from the
corresponding slot.
The USB (Universal Serial Bus) port allows you to connect
a USB peripheral to your computer.
The infrared port allows cable-free communication with another
device, such as a computer or printer, that has a compatible
infrared port.
The wireless antenna on-off switch turns the computer’s
wireless antenna on or off.
The wireless antenna LED glows when the wireless antenna
is in use.
37
Finding Your Way Around
Front with the display open
Front with the display open
The computer’s screen is a liquid crystal display (LCD) that
provides clear, sharp images.
The power button turns the computer on and off.
The stereo speakers let you hear sounds, such as system
alarms associated with your software, and music from DVD-
ROMs and audio CDs.
The function keys, when used with the Fn key, activate
several different system functions. For more information, see
“Hot ” n pageKeys o 260.
The 85-key keyboard provides all the functionality of a full-
size keyboard. For more information, see “Using the
keyboard” on page 83.
Power button
Screen
Keyboard
Primary control button
Palm rest
TouchPad
Internet button
TV button
TOSHIBA
Console
button
Speaker
Speaker
CD/DVD control buttons
Secondary
control
button
CD/DVD control buttons
System indicator panel
Function keys
Volume
control
dial
Keyboard
indicator
lights
38 Finding Your Way Around
Front with the display open
The TouchPad TM enables you to move the cursor with the
stroke of a finger. For more instruction on the TouchPad, see
“Using the TouchPad™” on page 58.
The primary control button, located below the TouchPad,
acts like the primary button on a mouse.
The CD/DVD control buttons allow you to play audio CDs
when the computer is turned off. You can also use them to
play CDs and DVDs with the computer turned on. For a
description of these controls, see “CD/DVD control buttons”
on page 41.
The system indicator panel is a series of lights that glow
when certain functions are being performed by the system.
For more information, see “System indicator panel” on
page 40.
The volume control dial lets you adjust the loudness of the
system speakers.
The secondary control button, located below the TouchPad,
acts like the secondary button on a mouse.
The front panel provides a palm rest to assist you in
maintaining proper posture while using the computer.
The keyboard indicator lights provide information about
various keyboard functions. For details, see “Keyboard
indicator lights” on page 39.
The TV button lets you toggle between viewing a DVD on
your LCD screen and viewing it on a TV when connected to
your computer’s S-video port. For more information, see
“Co nec ing a TV to yo r comp ter” n pagen t u u o 181.
The TOSHIBA Console button allows quick access to
various functions. For information on the TOSHIBA
Console, see “ OSHI A Co ole” on pageT B ns 200.
The Internet button turns on the computer and launches
your default Internet browser.
39
Finding Your Way Around
Front with the display open
Keyboard indicator lights
The cursor control mode light glows green when the cursor
control overlay is on. When this light is on, pressing an
overlay key moves the cursor in the direction of the arrow
printed on the front of the key instead of typing the letter
printed on the top of the key.
The numeric mode light glows green when the numeric
overlay is on. When this light is on, pressing an overlay key
types the number printed on the front of the key instead of
typing the letter printed on the top of the key.
The
caps lock light
glows when the caps lock function is on.
For more information, see “Overlay keys” on page 85.
40 Finding Your Way Around
Front with the display open
System indicator panel
The CD/DVD indicator light glows green when a CD or
DVD is playing.
The audio digital light glows green when audio digital files
are playing.
The AC power light glows green when the computer is
connected to an external power source.
The on/off light glows green when the computer is on. The
light flashes amber when the computer is in Standby mode.
The battery light indicates the main battery’s current charge.
It glows green when the battery is fully charged. It glows
amber while the battery is being charged. It does not glow if
the external power source is disconnected or if the battery is
completely discharged. For more information on determining
remaining battery power, see “Monitoring battery power” on
p gea 124.
The disk drive indicator light glows green when the fixed or
optional hard disk drive is being accessed.
41
Finding Your Way Around
Front with the display open
The Slim SelectBay activity light glows green when the
computer is accessing a DVD-ROM or multi-function drive
or optional hard disk drive in the Slim SelectBay.
CAUTION: Never turn off the computer while any drive is in use.
Doing so may damage the media in use and result in loss of data.
CD/DVD control buttons
The control buttons on the front of the computer are for
playing CDs, DVDs and digital audio files. You can play
audio CDs while the computer is turned off.
The mode button acts like a CD switch. When this button is
in digital mode, pressing the play button launches Windows
MediaTM
Player. When this button is in analog mode, pressing
the play button starts the sound system. When pressing the
mode button, hold it down for several seconds until the CD/
DVD indicator light goes on.
The previous track button returns the disc player to the
preceding track on the disc.
The next track button causes the disc player to skip to the
following track on the disc.
The play/pause button starts the disc player, or makes the
disc player pause if it is currently playing.
Mode
button
Previous
track
Next
track Play/
pause Stop/eject
42 Finding Your Way Around
Underside
The stop/eject button stops a disc that is currently playing.
Press the button again to eject the disc.
NOTE: If you have set a password for logging onto your system,
your computer will start up and you will need to log on before
being able to play a CD or DVD.
Underside
The hard disk drive is the computer’s permanent data
storage device.
The Slim SelectBay release latch allows you to remove
devices from the Slim SelectBay.
The CPU cooling fan keeps the central processing unit at a
temperature suitable for optimum performance.
The battery pack contains the battery. For information about
replacing the battery, see “Changing the main battery” on
p gea 128.
The battery release latch secures the battery to the
computer, preventing the battery from dislodging from the
computer case.
Battery
Slim
Battery
C
PU cooling fan
release
latch
SelectBay
release
latch
Hard
disk
drive
pack
43
Chapter 2
Getting Started
This chapter provides tips for working comfortably, describes
how to connect components, and explains what to do the first
time you use your notebook computer.
Selecting a place to work
Your computer is portable and designed to be used in a
variety of circumstances and locations.
Creating a computer-friendly environment
Place the computer on a flat surface which is large enough for
the computer and any other items you need to use, such as a
printer. Leave enough space around the computer and other
equipment to provide adequate ventilation and prevent
overheating.
To keep your computer in prime operating condition, protect
your work area from:
❖Dust, moisture, and direct sunlight.
44 Getting Started
Selecting a place to work
❖Equipment that generates a strong electromagnetic field,
such as stereo speakers (other than speakers that are
connected to the computer) or speakerphones.
❖Rapid changes in temperature or humidity and sources of
temperature change such as air conditioner vents or
heaters.
❖Extreme heat, cold, or humidity.
❖Liquids and corrosive chemicals.
CAUTION: If you spill liquid into the computer, turn it off, unplug it
from the AC power source, and let it dry out completely before
turning it on again.
If the computer does not operate correctly after you turn it back on,
contact your network administrator. If the computer still does not
operate, refer to “If y u need further as ista ce” on p geo s n a 255 for
additional technical assistance.
Keeping yourself comfortable
Strain and stress injuries are becoming more common as
people spend more time using their computers. With a little
care and proper use of the equipment, you can work
comfortably throughout the day.
This section provides hints on avoiding strain and stress
injuries. For more information, consult books on ergonomics,
repetitive-strain injury, and repetitive-stress syndrome.
Placement of the computer
Proper placement of the computer and external devices is
important to avoid stress-related injuries.
❖Place the computer on a flat surface at a comfortable
height and distance. You should be able to type without
45
Getting Started
Selecting a place to work
twisting your torso or neck, and look at the screen
without slouching.
❖If you are using an external monitor, the top of the
display should be no higher than eye level.
❖If you use a paper holder, set it at about the same height
and distance as the screen.
Seating and posture
When using your computer, maintain good posture with your
body relaxed and your weight distributed evenly. Proper
seating is a primary factor in reducing work strain. Some
people find a backless chair more comfortable than a
conventional chair.
Correct posture and positioning of the computer
Whichever type you choose, use the following guidelines to
adjust your chair for maximum computing comfort.
❖Position your chair so that the keyboard is at or slightly
below the level of your elbow. You should be able to type
comfortably with your shoulders relaxed and your
forearms parallel to the floor.
Below eye level
Footrest
Approximately
90-degree angles
46 Getting Started
Selecting a place to work
If you are using a conventional chair:
❖Your knees should be slightly higher than your hips. If
necessary, use a footrest to raise the level of your knees
and ease the pressure on the back of your thighs.
❖Adjust the back of your chair so that it supports the lower
curve of your spine. If necessary, use a cushion to
provide extra back support. Lower-back-support
cushions are available at many office supply stores.
❖Sit with your back straight so that your knees, hips, and
elbows form approximately 90-degree angles when you
work. Do not slump forward or lean back too far.
Lighting
Proper lighting can improve the visibility of the display and
reduce eyestrain.
❖Position the display panel or external monitor so that
sunlight or bright indoor lighting does not reflect off the
screen. Use tinted windows or shades to reduce glare.
❖Avoid placing your computer in front of a bright light
that could shine directly in your eyes.
❖If possible, use soft, indirect lighting in your computer
work area.
Arms and wrists
❖Avoid bending, arching, or twisting your wrists. Keep
them in a relaxed, neutral position while typing.
47
Getting Started
Selecting a place to work
❖Exercise your hands, wrists, and arms to improve
circulation.
WARNING: Using the computer keyboard incorrectly may result in
discomfort and possible injury. If your hands, wrists, and/or arms
bother you while typing, stop using the computer and rest. If the
discomfort persists, consult a physician.
Work habits
The key to avoiding discomfort or injury from strain is to
vary your activities. If possible, schedule a variety of tasks
into your working day. Finding ways to break up the routine
can reduce stress and improve your efficiency.
❖Take frequent breaks to change position, stretch your
muscles, and relieve your eyes. A break of two or three
minutes every half hour is more effective than a long
break after several hours.
❖Avoid performing repetitive activities for long periods.
Intersperse such activities with other tasks.
❖Focusing your eyes on your computer screen for long
periods can cause eyestrain. Look away from the
computer frequently and focus your eyes on a distant
object for at least 30 seconds.
Precautions
Your notebook computer is designed to provide optimum
safety and ease of use, and to withstand the rigors of travel.
You should observe certain precautions to further reduce the
risk of personal injury or damage to the computer.
❖Avoid prolonged physical contact with the underside of
the computer.
If the computer is used for long periods, its case can
become very warm. While the temperature may not feel
48 Getting Started
Selecting a place to work
too hot to the touch, if you maintain physical contact with
the computer for a long time (if you rest the computer on
your lap, for example), your skin might suffer low-heat
injury.
❖Never apply heavy pressure to the computer or subject it
to sharp impacts. Excessive pressure or impact can
damage computer components or otherwise cause your
computer to malfunction.
❖Some PC Cards can become hot with prolonged use. If
two cards are installed, both can become hot even if only
one is being used. Overheating of a PC Card can result in
errors or instability in its operation.
Be careful when you remove a PC Card that has been
used for a long period.
❖Avoid spilling liquids into the computer’s keyboard.
If you do spill a liquid that gets into the keyboard, turn
off the computer immediately. Leave the computer turned
off overnight to let it dry out before you use it again.
❖Never turn off the computer if a drive light indicates a
drive is active.
Turning off the computer while it is reading from or
writing to a disk may damage the disk, the drive, or both.
❖Keep the computer and disks away from objects that
generate strong magnetic fields, such as large stereo
speakers.
Information on disks is stored magnetically. Placing a
magnet too close to a disk can erase important files.
❖Scan all new files for viruses.
This precaution is especially important for files you
receive via diskette, email, or download from the
Internet. Occasionally, even new programs you buy from
a supplier may contain a computer virus. You’ll need a
special program to check for viruses. Ask your dealer to
help you.
49
Getting Started
Setting up your computer
Setting up your computer
Your computer contains a rechargeable high-capacity battery
that needs to be charged before you can use it.
To use external power or to charge the battery, you must
attach the AC adapter. See “Connecting to a power source”
on page 52.
Setting up your software
NOTE: The names of windows displayed and the order in which
windows appear may vary depending on your software setup
choices.
The first time you turn on your computer, the Setup Wizard
guides you through steps to set up your software.
1From the welcome screen, click Next to enter the Setup
Wizard.
2Confirm acceptance of Microsoft’s End User License
Agreement and click Next.
3Enter the computer name and description and click Next
or Skip.
The computer will pause for a moment while checking
for an internet connection, and you will see the screen
“Checking your internet connectivity.”
A window will display the message: “How will this
computer connect to the internet?” The system displays
three selections: Telephone modem, Digital subscriber
line (DSL) or cable, or Local Area Network (LAN).
50 Getting Started
Setting up your computer
4Click Skip to exit the process or Next to continue.
NOTE: To register online, your computer’s modem must be
connected to a voice-grade telephone line.
A window will display asking if you wish to register with
Toshiba and Microsoft.
5Click Yes to register, or No to exit the process.
NOTE: If you click No, you may register with Toshiba by clicking
the Register with Toshiba icon on the desktop.
6If you selected Yes in step 5, enter your personal
information in the registration window.
A window will display the message, “Who will use this
computer?”
7Enter your name and click Next to complete the process.
A window will display the message, “Thank you.”
8Click Finish to continue.
Your computer restarts automatically.
Registering your computer with Toshiba
Registering your computer lets Toshiba keep you up-to-date
with information about new products and upgrades, and also
extends your Toshiba warranty worldwide at no charge to
you. You can register your computer with Toshiba by double-
clicking the icon on your desktop.
NOTE: To register online, your computer’s modem must be
connected to a voice-grade telephone line.
51
Getting Started
Setting up your computer
Adding external devices
NOTE: Before adding external devices, Toshiba recommends
setting up your software first. See “Setting up your software” on
page 49.
Before starting to use your computer, you may also want to:
❖Add more memory (see “Installing additional memory
(optional)” on page 60)
❖Connect a mouse (see “Connecting a mouse” on page 74)
❖Connect a full-size keyboard (see “Connecting a monitor,
key o ob ard d m an us ” on p gee a 185)
❖Connect an external monitor (see “Connecting a monitor,
key o ob ard d m an us ” on p gee a 185)
❖Connect a local printer (see “Connecting a printer” on
page 74)
❖Install PC Cards (see “Using PC Cards” on page 189)
❖ Ins all SD cards (seet
“U ng SD ard ” on pa esi c s g 192)
❖Install a Slim SelectBay module (see “Installing and
locking an optional Slim SelectBay module” on page 69)
52 Getting Started
Connecting an optional external USB diskette drive
Connecting an optional external USB diskette
drive
You can attach an optional external USB diskette drive to use
diskettes with your computer. These drives hold 3.5-inch
diskettes.
Sample external USB diskette drive
To connect an optional external USB diskette drive, connect
the drive’s cable to one of the computer’s USB ports.
For more information about diskettes, see “Using diskettes”
on page 89.
Connecting to a power source
Your computer requires power to operate. Use the power
cable and AC adapter to connect the computer to a live
electrical outlet, or to charge the computer’s battery.
53
Getting Started
Connecting to a power source
Power cable and AC adapter
CAUTION: Use only the AC adapter supplied with your computer
or an equivalent adapter that is compatible. Use of any
incompatible adapter could damage your computer. Toshiba
assumes no liability for any damage caused by use of an
incompatible adapter.
When you connect the AC adapter to the computer, always follow
the steps in the exact order as described in the User's Manual.
Connecting the power cable to a live electrical outlet should be the
last step otherwise the adapter DC output plug could hold an
electrical charge and cause an electrical shock or minor bodily
injury when touched. As a general safety precaution, avoid
touching any metal parts.
DANGER: Hold the power cable by its plug when you connect/
disconnect it. Do NOT pull the cable itself. Doing so may damage
the power cable and result in a short circuit or electric shock.
To connect AC power to the computer:
1Connect the power cable to the AC adapter.
Power cable AC adapter
54 Getting Started
Connecting to a power source
Connecting the power cable to the AC adapter
2Plug the AC adapter into the DC-IN on the back of the
computer.
Connecting the AC adapter to the computer
3Connect the power cable to a live electrical outlet.
If the electrical outlet is live, the system indicator panel’s AC
power light ( ) glows green.
55
Getting Started
Charging the main battery
DANGER: Damaged power cables can cause fire or electric shock.
Never modify, forcibly bend, place heavy objects on top of, or
apply heat to the power cable.
If the power cable becomes damaged or the plug overheats,
discontinue use. There is a risk of electric shock.
Never remove the power plug from the outlet with wet hands.
Doing so may cause an electric shock.
Charging the main battery
To charge the main battery, plug the computer into a live wall
outlet. It takes several hours to charge the battery with the
computer off. It takes much longer to charge the battery while
the computer is on. For more information on battery use, see
“R ng the er on batt ry p er” on p geu nn i co pm ut e ow a 121.
TECHNICAL NOTE: The battery does not charge while the
computer is consuming full power.
CAUTION: Once the battery is charged for the first time, avoid
leaving the computer plugged in and turned off for more than a few
hours at a time. Continuing to charge a fully charged battery can
damage the battery.
NOTE: Battery life and charge time may vary depending on the
applications, power management settings, and features used.
56 Getting Started
Using the computer for the first time
Using the computer for the first time
Opening the display panel
Press the display latch and lift the display panel.
Opening the display panel
CAUTION: To avoid damaging the display panel, don’t force it
beyond the point where it moves easily.
Never lift or move the computer using the display panel.
Turning on the power
1Make sure there are no media (i.e. CD-ROMs, DVD-
ROMs, diskettes) in your computer’s drives.
CAUTION: Never turn off the computer while any drive is in use.
2Turn on the computer by pressing and releasing the
power button located on the top of the keyboard. For an
Lift
57
Getting Started
Using the computer for the first time
illustration to help you locate this button, see “Front with
the display open” on page 37.
NOTE: When you turn on the computer for the first time, don’t turn
off the power again until the operating system has loaded
completely.
Activating the power-on password
When you first turn on your computer, no password is
required. But you can set up your computer so that a
password is required to complete the powering up process in
the future.
To activate the power-on password:
1Press the TOSHIBA Console button.
The TOSHIBA Console window appears.
2Click Security.
3Click User password.
4Follow the on-screen instructions.
The password requirement becomes active the next time
you turn on your computer.
When the feature is active, you must enter the password
during the power-on process. After typing your
password, press the Enter key.
If the password is correct, the power-on process
continues. If the password is incorrect, you will be
prompted to try again.
NOTE: If you forget your power-on password and therefore can’t
turn on your computer, take your computer to a Toshiba authorized
service center for help.
58 Getting Started
Using the computer for the first time
After the third incorrect password submission, the system
automatically shuts down.
Using the TouchPad™
The TouchPad, the small, smooth square cutout located in
front of the keyboard, is sensitive to touch and enables you to
move the cursor with the stroke of a finger. Simply move
your finger on the TouchPad in the direction you’d like to
move the cursor:
❖To move the cursor to the top of the page, push your
finger forward on the TouchPad.
❖To move the cursor to the bottom of the page, drag your
finger toward yourself.
❖To move the cursor to the right side of the page, slide
your finger across the TouchPad from left to right.
❖To move it to the left side, slide your finger from right to
left.
NOTE: Because the TouchPad is much smaller than the display
screen, moving your cursor across the screen often means having
to move your finger several times across the TouchPad in the
preferred direction.
Once you’ve positioned your cursor, you can either click it
into place by double-tapping the TouchPad or clicking the
control buttons. For more on the TouchPad, see “Lesson 2:
Using the TouchPad and control buttons together” on
p gea 139.
Control buttons
When a step instructs you to click or choose an item, move
the cursor to the item, then press and release the primary
(left-hand) button. To double-click, press the primary button
59
Getting Started
Using the computer for the first time
twice in rapid succession. The primary button usually
corresponds to the left mouse button.
The function of the secondary (right-hand) button depends on
the program you are using. It usually corresponds to the right
mouse button. Check your program’s documentation to find
whether it uses the right mouse button.
Disabling or enabling the TouchPad
The TouchPad is enabled by default. To change the enable/
disable TouchPad setting by using the Fn + F9 keys, see
“Disa ling or e abli g t e uc a ” on pageb n n h To hP d 267.
You may also change the enable/disable setting as follows:
1Click Start, Control Panel.
The Control Panel window appears.
2Click Printers and Other Hardware.
3Click Mouse Properties.
The Mouse Properties window appears.
4Click the TouchPAD ON/OFF tab.
The TouchPAD ON/OFF tab view window appears.
5Select Disable or Enable, whichever is appropriate.
6Click Apply.
7Click OK.
The Mouse Properties window closes.
8Close the Printers and Other Hardware window.
9Close the Control Panel window.
60 Getting Started
Installing additional memory (optional)
Installing additional memory (optional)
CAUTION: Before you install or remove a memory module, turn off
the computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or Hibernation
mode, data will be lost.
A memory module must be installed in slot A. Do not try to
operate the computer with a memory module in slot B only.
Your computer is equipped with two memory slots which can
provide for various memory configurations. When additional
memory is added, or original memory replaced, it is
recommended that you use only compatible memory. In the
event original memory is replaced with invalid memory, the
system will beep and will not start up beyond the BIOS
memory check. A message will display. If this occurs, contact
Toshiba’s support center. See “Toshiba voice contact” on
p gea 256.
HINT: To purchase additional memory modules, visit the Toshiba
Web site t . a toshib c ma. o
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
There are two memory slots. Your system may have both
slots occupied.
CAUTION: If you use the computer for a long time, the memory
modules will become hot. If this happens, let the modules cool to
room temperature before you replace them.
61
Getting Started
Installing additional memory (optional)
CAUTION: Do not try to install a memory module under the
following conditions. You can damage the computer and the
module.
1. The computer is turned on.
2. The computer was shut down using Standby mode.
3. Power to the DVD-ROM or multi-function drive has been turned
on.
CAUTION: Do not install or remove a memory module while the
DVD-ROM or multi-function drive power is on.
You will need a standard Phillips No.1 screwdriver and a
small flat-head screwdriver to install a memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips screwdriver that is in good condition.
1If the computer is on, turn it off.
See “ u n O f or Sh t d wn comman ” on pageT r f u o d 102.
2Unplug and remove any cables connected to the
computer.
3Open the display panel and remove the panel above the
keyboard that contains the power and TOSHIBA Console
buttons.
CAUTION: When removing the computer’s power and TOSHIBA
Console button panel to install additional memory, be careful not
to damage the display or circuit board.
62 Getting Started
Installing additional memory (optional)
Using a flat-head screwdriver to pry off the panel
You can pry the panel out of its position by using a flat-
head screwdriver. Starting at the left or right side,
carefully wedge the flat-head screwdriver between the
panel and the surrounding housing. Grasp the end of the
panel and lift up until the panel comes free.
4Remove the three screws that hold the keyboard in place,
and remove the keyboard retaining brace.
Removing the left keyboard screw
63
Getting Started
Installing additional memory (optional)
The two-inch-long, propeller-shaped brace sits in the center
of the area exposed when the panel is removed.
NOTE: Observe how the propeller-shaped keyboard retaining
brace is positioned before you remove it.
Store the brace with the screws for safekeeping.
Removing the right keyboard screw
5Lift the keyboard and gently place it face down on the
palm rest of the computer.
Lifting the keyboard
64 Getting Started
Installing additional memory (optional)
Removing the keyboard exposes the two memory slots,
which are covered by a plastic sheet.
Locating the covered memory module slots
6Lift (but don’t detach) the plastic sheet to expose the
memory slots.
Lifting the plastic covering the memory slots
Covered memory slots
66 Getting Started
Installing additional memory (optional)
To secure the keyboard, fit the tabs at the bottom of the
keyboard into the corresponding slots at the top of the
computer’s palm rest.
11 Fasten the keyboard with the keyboard retaining brace
and screws.
12 Replace the panel above the keyboard by doing the
following:
❖Fit the tabs at the bottom of the panel into
corresponding slots at the top of the keyboard.
❖Fit the tabs at the top of the panel into corresponding
slots at the base of the display and gently push down.
When the panel is properly positioned, it will snap down
into place.
13 Reconnect any cables you removed.
14 Turn on the computer.
To verify that the computer correctly recognizes the
memory, see “Checking total memory” on page 68.
15 If the computer does not recognize the memory, shut
down the computer, remove the keyboard and make sure
the memory module is seated properly, as described in
step 8, above.
Removing a memory module
CAUTION: If you use the computer for a long time, the memory
modules will become hot. If this happens, let the modules cool to
room temperature before you replace them.
68 Getting Started
Installing additional memory (optional)
3Carefully remove the module from the slot.
CAUTION: Static electricity can damage the memory module.
Before you handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
pin connector (on the side you insert into the computer).
CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.
Removing the memory module
4Complete the procedure by following steps 9 through 14
in “Installing additional memory (optional)” on page 60.
Checking total memory
When you add or remove memory, you can check that the
computer has recognized the change. To do this:
1Click Start, Control Panel
2Click Performance and Maintenance.
69
Getting Started
Connecting an optional Slim SelectBay module
3Click System.
4The General tab view automatically appears and shows
the recognized memory.
5If the computer does not recognize the memory
configuration, turn off the computer, remove the
keyboard and make sure the memory module is seated
properly, as described in “Installing additional memory
(optional)” on page 60.
Connecting an optional Slim SelectBay
module
Your computer has a Slim SelectBay, in which you can
connect optional modules with a variety of functions:
❖An optional DVD-ROM or multi-function drive
❖An optional hard disk drive
Hot swapping an optional Slim SelectBay module
One of the great things about optional Slim SelectBay
modules is that you can replace one module with another
while the computer is on. This is called “hot swapping.”
Stop the module by clicking the Safely Remove Hardware
icon on the System tray. After the module is stopped, it is safe
to remove.
NOTE: To hot swap optional Slim SelectBay modules, make sure
the Slim SelectBay is not locked with the lock screw.
Installing and locking an optional Slim SelectBay module
To install a module with an optional hard disk drive, you
must first add the optional hard disk drive to the module.
70 Getting Started
Connecting an optional Slim SelectBay module
Please see “Inserting an optional hard disk drive into its
module” on page 72.
To install a Slim SelectBay module:
1Save your work.
2Turn off the computer via the Start menu.
3Remove all cables connected to the computer.
4Close the display panel and turn the computer upside
down.
5Insert the module in the computer as shown below until
the release latch clicks.
Installing and locking the Slim SelectBay module
To lock a Slim SelectBay module:
1Locate the Slim SelectBay lock screw and lock screw
holes next to the Slim SelectBay release latch.
2Remove the Slim SelectBay lock screw from the hole for
the unlocked position (the hole closest to the back of the
computer).
3Insert the screw in the adjoining hole for the locked
position (the hole closest to the front of the computer)
and tighten it.
Slim
Slim
SelectBay
lock screw
SelectBay
release
latch
Slim SelectBay
lock screw holes
71
Getting Started
Connecting an optional Slim SelectBay module
Removing an optional Slim SelectBay module
To remove a Slim SelectBay module:
1Make sure the module isn’t in use.
2Save your work.
3Turn off the computer via the Start menu.
4Remove all cables connected to the computer.
5Close the display panel and turn the computer upside
down.
6If the Slim SelectBay module is locked, remove the Slim
SelectBay lock screw from the hole for the locked
position.
To locate the Slim SelectBay lock screw holes, see
“Installing and locking an optional Slim SelectBay
module” on page 69.
7Slide the Slim SelectBay latch to the unlocked position
8Grasp the module and slide it out.
9Replace the lock screw in either the hole for the locked or
the hole for the unlocked position.
Removing a Slim SelectBay module
72 Getting Started
Connecting an optional Slim SelectBay module
Inserting an optional hard disk drive into its module
Before you install an optional hard disk drive module in the
Slim SelectBay, you must first add the optional hard disk
drive to its module.
To add the optional hard disk drive to its module:
1Slide the lock on the module to the unlocked position and
open the module lid.
Opening the lid to the optional hard disk drive module
2Insert the optional hard disk drive, pushing it to ensure a
firm connection.
73
Getting Started
Connecting an optional Slim SelectBay module
Inserting the optional hard disk drive in its module
3Close the module lid and slide the lock to the locked
position.
Closing the module lid
The module is ready to be inserted into the Slim
SelectBay. Please see “Installing and locking an optional
Slim SelectBay module” on page 69.
75
Getting Started
Setting up a printer
Setting up a printer
If you started your computer with a printer connected and
turned on, it may have been detected automatically (Plug and
Play). If this is not the case, then you must install the printer
driver for the model of printer that is connected to your
computer. You install the printer driver either by following
the instructions indicated in your printer manual, or by using
the operating system Add Printer Wizard.
If you plan to set up a printer later, click Cancel.
Using the Add Printer Wizard
To set up a printer with the Add Printer Wizard:
1Click Start, Control Panel, then Printers and Other
Hardware.
2Select Printers and Faxes.
The Printers and Faxes window appears.
Sample Printers and Faxes window
3Click Add Printer.
The Add Printer Wizard starts.
76 Getting Started
Setting up a printer
Sample Add Printer Wizard
4Click Next.
The Add Printer Wizard asks you to select your printer.
TECHNICAL NOTE: If your printer is Plug and Play, the operating
system recognizes it automatically. You can ignore the remainder
of this section. See your printer manual.
5If the printer you are setting up:
❖Is not connected to a network, select Local printer
attached to this computer.
If you select Local printer, check “Automatically detect
and install my Plug and Play printer.”
❖Is connected to a network, select Network printer,
or a printer attached to another computer.
77
Getting Started
Powering off the computer
6Click Next.
The Add Printer Wizard prompts you to select your
printer.
7From the list of manufacturers and printers, select your
printer, then click Next.
8Select the port settings according to the instructions in
your printer’s documentation and the port to which your
printer is connected, then click Next.
The Add Printer Wizard prompts you to enter a printer
name.
9Enter a name for your printer.
HINT: If you are using more than one printer, make sure the name
is descriptive enough to help you tell the difference.
10 To set up the printer to be the default printer for the
operating system, click Ye s.
11 Click Next.
The operating system prompts you to print a test page.
12 If your printer is connected and turned on, click Next.
To complete the setup procedure without printing a test
page, click No, then click Next.
13 Click Finish.
You are now ready to print.
Depending on your program, you may see various
messages indicating the status of your print job.
Powering off the computer
It’s a good idea to power off your computer when you are not
using it for a while.
78 Getting Started
Caring for your computer
If you are using the computer for the first time, leave the
computer plugged into a power source (even though the
computer is off) to fully charge the main battery. When the
main battery light glows green, the battery is fully charged.
Guidelines for powering off the computer:
❖If you have work in progress and if you are not connected
to a network, use the Hibernate command to save your
system settings to the hard disk so that, when you turn on
the computer again, you automatically return to where
you left off.
❖To leave the computer off for a longer period, power
down the computer. The Windows® XP operating system
uses the Shut down command to power down the
computer if you are connected to a Windows® network
server (domain server) or the Turn Off command if you
are not.
❖When the disk drive light on the system indicator panel is
on, don’t turn off the power. Doing so may damage your
hard disk.
For more information, see “Powering down the computer” on
p gea 102.
Caring for your computer
This section gives tips on cleaning and moving your
computer, and explains how to fit an antitheft lock. For
information about taking care of your computer’s battery, see
“R ng the er on batt ry p er” on p geu nn i co pm ut e ow a 121.
Cleaning the computer
To keep your computer clean, gently wipe the display panel
and exterior case with a lightly dampened cloth. Ask your
79
Getting Started
Caring for your computer
Toshiba dealer for suggestions for appropriate cleaning
products.
CAUTION: Keep liquid, including cleaning fluid, out of the
computer’s keyboard, speaker grille, and other openings. Never
spray cleaner directly onto the computer. Never use harsh or
caustic chemical products to clean the computer.
Moving the computer
Before moving your computer, even across the room, make
sure all disk activity has ended (the disk activity lights stop
glowing) and all external peripheral cables are disconnected.
CAUTION: Never pick up the computer by its display panel or by
the back (where the ports are located).
Although your notebook computer is built to withstand
reasonable shock and vibration, transport it in a carrying case
for long trips. You can purchase a carrying case from your
Toshiba dealer or visit Toshiba’s Web site at toshiba.com.
Using a computer lock
You may want to secure your computer to a heavy object
such as your desk. The easiest way to do this is to purchase an
optional PORT-Noteworthy® computer lock cable.
PORT-Noteworthy® computer lock cable
80 Getting Started
Caring for your computer
To secure the computer:
1Loop the cable through or around some part of a heavy
object.
Make sure there is no way for a potential thief to slip the
cable off the object.
2Pass the locking end through the loop.
3Insert the cable’s locking end into the security lock slot,
then rotate the key a quarter turn and remove it.
The computer is now securely locked to deter computer
theft.
Locking the computer
Specyfikacje produktu
| Marka: | Toshiba |
| Kategoria: | laptop |
| Model: | Satellite 2455 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Toshiba Satellite 2455, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje laptop Toshiba
31 Grudnia 2025
13 Października 2024
3 Października 2024
22 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
13 Września 2024
Instrukcje laptop
- laptop Sony
- laptop Samsung
- laptop Fellowes
- laptop LG
- laptop Xiaomi
- laptop Huawei
- laptop Lenovo
- laptop Gigabyte
- laptop Acer
- laptop Fujitsu
- laptop Panasonic
- laptop Viewsonic
- laptop Asus
- laptop Medion
- laptop MSI
- laptop Haier
- laptop HP
- laptop Prixton
- laptop Hyundai
- laptop Honor
- laptop Tripp Lite
- laptop Zebra
- laptop Dell
- laptop Schneider
- laptop Thomson
- laptop Pyle
- laptop Apple
- laptop Razer
- laptop ADATA
- laptop GoClever
- laptop SPC
- laptop NEC
- laptop Oregon Scientific
- laptop Jay-Tech
- laptop Microsoft
- laptop ECS
- laptop XPG
- laptop Denver
- laptop Lexibook
- laptop Micromax
- laptop Odys
- laptop TechBite
- laptop TrekStor
- laptop Alienware
- laptop Airis
- laptop Emachines
- laptop Hähnel
- laptop Sylvania
- laptop Coby
- laptop Evga
- laptop Ricatech
- laptop Mpman
- laptop Vizio
- laptop Targa
- laptop Peaq
- laptop Ematic
- laptop Hannspree
- laptop Inovia
- laptop Ibm
- laptop Atdec
- laptop Packard Bell
- laptop Compaq
- laptop SIIG
- laptop Hercules
- laptop Kogan
- laptop Getac
- laptop Vulcan
- laptop System76
- laptop General Dynamics Itronix
- laptop CTL
- laptop Everex
- laptop Olidata
- laptop Dynabook
- laptop Hamilton Buhl
- laptop AORUS
- laptop Humanscale
- laptop Aplic
- laptop Schenker
Najnowsze instrukcje dla laptop
4 Marca 2025
11 Lutego 2025
11 Lutego 2025
10 Lutego 2025
6 Lutego 2025
6 Lutego 2025
31 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025