Instrukcja obsługi Toshiba 46VL748
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Toshiba 46VL748 (82 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/82
VL74* Digital
Series
XL74* Digital
Series
EUROPEAN UNION ECOLABEL
A
warded to goods or services which meet the environmental
requirements of the EU ecolabelling scheme
2
English
Contents
INSTALLING YOUR TV
Safety Precautions ........................................... 4
Installation and important information .............. 5
The remote control .......................................... 7
Inserting batteries and effective range ........ 7
CONNECTING YOUR TV
Connecting external equipment ........................ 8
Bundling the cables ......................................... 9
Connecting an HDMI® or DVI device to the HDMI
input .......................................................... 10
To connect an HDMI device ...................... 10
To connect a DVI device ........................... 10
HDMI’s ARC (Audio Return Channel)
feature ................................................. 10
REGZA-LINK connection ................................. 11
Connecting a computer ..................................12
To connect a PC to the RGB/PC terminal ... 12
To connect a PC to the HDMI terminal ...... 12
Connecting a home network ........................... 13
To connect the TV to a home network -
Wired ...................................................13
To connect the TV to a home network with an
internet connection - Wireless ................ 13
Controls and input connections ...................... 14
Switching on ........................................... 14
Using the remote control .......................... 14
Using the controls and connections ........... 14
SETTING UP YOUR TV
Startup Application ........................................ 15
Quick Setup ............................................15
Ant/Cable/Satellite (if available) ............... 17
Satellite Settings ...................................... 17
Auto Tuning ............................................ 19
ATV Manual Tuning ....................................... 20
Tuning .................................................... 20
Skip ........................................................ 21
Sorting positions ...................................... 22
DTV Manual Tuning ....................................... 22
Manual Tuning ........................................ 22
Manual Tuning for DVB-C ........................ 23
Manual Tuning for DVB-S ......................... 23
DTV Settings .................................................. 23
Channels (Antenna/Cable) ....................... 23
Channels (Satellite) ................................. 24
Standby Channel Update ......................... 25
DVB Character Set ................................... 25
Dynamic Scan ......................................... 25
Location setting ....................................... 25
Analogue switch-off ............................... 25
CONTROLS AND FEATURES
General controls ............................................ 26
Quick Menu ............................................ 26
Selecting positions ................................... 26
The Time Display – analogue only ........... 26
Stereo and Bilingual transmissions ............ 26
Sound controls .............................................. 27
Volume controls and mute sound .............. 27
Dual ....................................................... 27
Balance .................................................. 27
Sound Navi ............................................. 27
Surround Settings .................................... 27
Dolby Volume® ....................................... 28
Dynamic Range Control ........................... 28
Audio Level Offset ................................... 28
Audio Description .................................... 28
Widescreen viewing ....................................... 29
Picture controls .............................................. 31
Picture Mode ........................................... 31
Picture preferences .................................. 31
Reset ...................................................... 31
Colour Master ......................................... 31
Base Colour Adjustment ........................... 32
Colour Temperature ................................ 32
Auto Brightness Sensor Settings ................ 32
Active Backlight Control ........................... 33
Black/White Level .................................... 33
Static Gamma ......................................... 33
MPEG NR – Noise Reduction ..................... 33
DNR – Digital Noise Reduction ................. 33
Resolution+ ............................................ 33
Active Vision M100 .................................. 33
Film Stabilization ..................................... 34
Resetting the advanced picture settings ..... 34
Expert Picture Settings .............................. 34
Control Visualization ............................... 35
Automatic Format (Widescreen) ................ 35
4:3 Stretch .............................................. 35
Blue Screen ............................................. 35
Picture Position ........................................ 36
Picture still .............................................. 36
HDMI Information Display ........................ 36
Using your home network .............................. 37
Setting up the Network .................................. 38
Wireless Setup ........................................ 38
Advanced Network Setup ......................... 40
DNS Setup .............................................. 41
Network Connection Test ......................... 42
Using the software keyboard .......................... 42
3
English
Setting up the Media Renderer feature ............ 43
Installation .............................................. 43
Media Renderer ....................................... 43
Device Name Setup ................................. 43
Web Password Setup ................................ 44
Media Controller Setup ............................ 44
Maximum Volume Setup .......................... 44
Using YouTube™ ........................................... 45
Using the Function Menu ......................... 45
Using the Media Player .................................. 47
Basic operation ....................................... 48
Viewing photo files .................................. 49
Viewing movie files (on a DLNA CERTIFIED™
Server or USB device) ............................ 51
Playing music files (on a DLNA CERTIFIED™
Server or USB device) ............................ 53
Using the Photo Frame feature ....................... 54
To open Photo Frame ............................... 54
Setting the features ................................. 55
Other features ............................................... 56
Panel Lock .............................................. 56
The timers ..................................................... 57
Programme Timers – digital only ............. 57
On Timer ................................................ 57
Sleep Timer ............................................. 58
Energy Saving Settings ................................... 58
Automatic Power Down ............................ 58
No Signal Power Down ............................ 58
Digital on-screen information and Programme
Guide ......................................................... 59
Information .............................................59
Guide .....................................................60
Genre selection/searching ....................... 60
Digital settings – parental control ................... 61
Setting the PIN ........................................ 61
Parental Setup ......................................... 61
Network Lock .......................................... 61
Digital settings – Channel Options .................. 62
Selecting favourite channels ..................... 62
Favourite Channel Lists ............................ 62
Skip channels .......................................... 62
Locking channels ..................................... 62
Digital settings – other settings ....................... 63
Subtitles .................................................. 63
Audio languages ..................................... 63
Common Interface ................................... 63
Software Upgrade and Licences ...................... 64
Auto Upgrade ......................................... 64
Searching for New Software ..................... 64
Network Upgrade .................................... 64
Software Licences .................................... 64
System Information and Reset TV .................... 65
System Information .................................. 65
Reset TV .................................................. 65
PC Settings ................................................... 65
Horizontal and Vertical Position ................ 65
Clock Phase ............................................ 65
Sampling Clock ....................................... 66
Reset ...................................................... 66
Input selection and AV connections ................. 66
Input selection ........................................ 66
External input skip ................................... 67
Labeling video input sources .................... 67
Colour Decoding ..................................... 67
PC Audio ................................................ 68
HDMI 2 Audio ......................................... 68
Side Shared Audio ................................... 68
HDMI Settings ......................................... 68
Digital Audio Output ............................... 69
Using REGZA-LINK ........................................ 70
Enable REGZA-LINK ................................. 70
TV Auto Power ......................................... 70
Auto Standby .......................................... 70
Amplifier Control ..................................... 70
Speaker Preference .................................. 70
REGZA-LINK input source selection ........... 70
REGZA-LINK playback device control ........ 71
REGZA-LINK one touch play ..................... 71
REGZA-LINK system standby ..................... 71
REGZA-LINK system audio control ............. 71
Toshiba PC compatible with REGZA-LINK .......71
TEXT SERVICES
Text services .................................................. 72
Selecting modes ...................................... 72
Text information ...................................... 72
Navigating pages using Auto ................... 72
Navigating pages using LIST .................... 72
Control buttons ....................................... 73
PROBLEM SOLVING
Questions and Answers .............................. 74
INFORMATION
License Information ....................................... 77
Information ................................................... 79
Specifications and accessories ........................ 82
4
English
Safety Precautions
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the
best results and for safety to be assured. Please read
the points below for your own safety. They are of a
general nature, intended to help with all electronic
consumer products, and some points may not apply to
the goods you have just purchased.
Leave more than 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
The mains supply required for this equipment is 220-
240v AC 50/60Hz. Never connect to a DC supply or
any other power source. DO ensure that the television
is not standing on the mains lead. Use only the
supplied lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
DO
read the operating instructions before you attempt
to use the equipment.
DO
ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO
consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO
be careful with glass panels or doors on
equipment.
DO NOT
obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DO NOT
allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids, such
as vases, to be placed on the equipment.
DO NOT
place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DO NOT
use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit the
manufacturer’s approved stand, bracket or legs with
the fixings provided according to the instructions.
DO NOT
leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT
continue to operate the equipment if you are
in any doubt about it working normally, or if it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.
NEVER connect the supplied COMPONENT
Adaptor cable or AV Adaptor cable to a wall
outlet. These cables are ONLY for insertion into
the socket provided for the purpose on the rear/
side of the TV.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
Air Circulation
Heat Damage
Mains Supply
Do
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Do not
WARNING:
To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.
INSTALLING YOUR TV
5
INSTALLING YOUR TV
English
Installation and important information
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
Injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided.
The LCD display panels are manufactured using an
extremely high level of precision technology; however,
sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a sign
of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. The enclosed cleaning cloth is for
cabinet cleaning. We recommend that you
do not
use any proprietary polishes or solvents on the screen or cabinet
as this may cause damage.
Please use a wall bracket appropriate for the size and weight
of the LCD TV.
• Two people are required for installation.
• Never use the four screws attached to the TV.
• To install a wall-mount from another manufacturer, use the
SPACERS
(supplied).
1
Unplug and remove any cables and/or other component
connectors from the rear of the TV.
2
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
3
Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s)
are attached to the wall and the back of the TV as described
in the instructions provided with the wall bracket.
4
Make sure to place the spacers supplied between the
bracket and the back of the TV.
5
Always use the screws supplied or recommended by the
wall mount manufacturer.
Removing the Pedestal Stand:
1
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the
stand protruding over the edge of the surface.
NOTE:
Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD
panel.
2
Remove the five screws.
3
Once you have removed all five screws holding the
pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.
Where to install
Stand clip
‘P’ Clip
Sturdy tie (as short as possible)
Fixing strap
Stand style is dependent on model
Fixing strap
When using a Wall Bracket
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)
Place four spacers (supplied).
Screw
Spacer
(supplied)
TV back panel
Wall bracket
Five screws
6
INSTALLING YOUR TV
English
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “SETUP” menu. Depending on country/area, some of this television’s functions may not be available. Reception
of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (eg: Super Live) will prevent permanent retention.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
NOTE:
A Toshiba wall bracket or stand, where available, must be used.
7
INSTALLING YOUR TV
English
The remote control
Simple at-a-glance reference for your remote control.
1
For On/Standby mode
2
To select external input sources
3
Selectable Picture preferences
4
Widescreen viewing
5
s
Stereo/bilingual transmissions
6
To select TV Mode
7
To access the analogue or digital Channel List
8
To access More Information Menu
9
Number buttons
10
Switch the Audio Description On/Off
11
To return to previous programme position
12
To alter the TV volume
13
To display on-screen information
To access the index page in Text mode
14
To mute the TV sound
15
To access Quick Menu
16
To change programme positions
To change TEXT pages
17
To display the digital on-screen Programme Guide
18
To exit menus
19
To page up, down, left or right
20
When using menus, the arrows move the cursor on the screen
up, down, left or right. Press
OK
to confirm your selection
21
On-screen Menus
22
To return to previous Menu
23
Colour buttons:
Text and interactive service control buttons
24
To call up text services
25
To access Media Player Menu
26
Digital Subtitles or Analogue TEXT Subtitle pages if available
28
When using REGZA-LINK:
1
To turn On/Standby
AUDIO
To access
AUDIO
Menu
SET UP
To access
SET UP
Menu
V
To EJECT
ROOT
To access
ROOT
Menu
CONTENTS
To access
CONTENTS
Menu
TOP
To access
TOP
Menu
DVD
To access
DVD
Menu
Remove the back cover to
reveal the battery compartment
and make sure the batteries are
inserted the proper way.
Suitable battery types for this
remote are AAA, IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead batteries immediately to prevent
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 78 of this
manual.
Warning:
batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond
a distance of five metres or outside an angle of 30 degrees
from the centre of the television. If the operating range
becomes reduced, the batteries may need replacing.
5
13
4
1
14
16
18
23
20
28
2
7
11
9
2
3
8
6
10
12
22
21
26
24
19
17
25
15
7
27
When in TV mode:
r
Picture still
D
Analogue time
display
When in Text mode:
A
To reveal concealed
text
B
To hold a wanted
page
C
To enlarge text
display size
D
To select a page
whilst viewing a
normal picture
When using Programme
Guide:
Z
- 24 hours
z
+ 24 hours
CC
- 1 page
cc
+ 1 page
During Playback:
c
To PLAY
v
To STOP
W
/
w
To PAUSE/STEP
Z
To SKIP-BACK
CC
To REWIND
cc
To FAST FORWARD
z
To SKIP-FORWARD
Inserting batteries and effective range
9
CONNECTING YOUR TV
English
Bundling the cables
Install the cable clamps, and put the cables in these.
Stand type
Wall Mount type
Cable Clamps
Cable Clamps
10
CONNECTING YOUR TV
English
Connecting an HDMI® or DVI
device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital video
from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant
[1]
consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 80.
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™
and
Enable Content Type
options to “
Off
”.
Your early HDMI source should operate properly with your
television. See page 68.
• Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 2 Audio” on page 68.
To view the HDMI device video, press the
o
button to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 2 terminal and audio cables to the PC/
HDMI 2 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
• An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 2 Audio” on page 68.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
This feature enables the audio signal of the TV to be sent to the
AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received from
the tuner of the TV through the AV amplifier.
To connect an HDMI device
HDMI cable
HDMI device
the back of your television
To connect a DVI device
HDMI’s ARC (Audio Return Channel) feature
HDMI-to- DVI
adaptor Cable
Audio cable for HDMI to
television connection
(not supplied)
DVI device
HDMI cable
AV amplifier that supports ARC
11
CONNECTING YOUR TV
English
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 70–71.
For the setup shown above, you will need three HDMI cables.
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).
• This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZA-LINK
Setup menu as you desire (see page 70).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
AV amplifier
Playback device
Playback device
the back of your television
12
CONNECTING YOUR TV
English
Connecting a computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the television
and hear the sound from the television’s speakers.
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 2 (AUDIO) socket. Select
PC
from the
PC/HDMI 2 Audio
options in the
AV Connection
menu located in the
SETUP
menu.
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. For acceptable PC signal
formats, see page 79.
To display the optimum picture, use the PC setting feature (see
page 65).
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 2 analogue audio input terminal (see page 68).
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the PC
on which you are playing the DVD-Video, some scenes may
be skipped or you may not be able to pause during multi-
angle scenes.
• A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g.
Colour System
in the
SETUP
menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 79) .
When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.
For acceptable PC and video signal formats, see page 80.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
To connect a PC to the RGB/PC terminal
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
Conversion adaptor if
required
(not supplied)
Mini D-sub 15 pin
connector
RGB PC cable
(not supplied)
To connect a PC to the HDMI terminal
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
HDMI-to-DVI
adaptor cable
13
CONNECTING YOUR TV
English
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA CERTIFIED™ server and play/display them on
your TV.
NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 41.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
Please refer to “Wireless Setup” section on page 38.
To connect the TV to a home network -
Wired
the back of your television
Cable or
Phone jack
[2]
[2][3]
[2][1]
Modem (if available) Router with hub
Server PC
To connect the TV to a home network with
an internet connection - Wireless
Access point (AP)
Wireless LAN router
Modem
PC
TOSHIBA Dual
Band WLAN adaptor
the back of your television
14
CONNECTING YOUR TV
English
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
If the RED LED is not lit, check that the mains plug is connected
to the power supply and push the
!
(POWER) button on the
left side of the television to switch the television on. If the
picture does not appear, press
1
on the remote control; it may
take a few moments. The BLUE LED will be lit.
To put the television into Standby, press
1
on the remote
control. To view the television, press
1
again. The picture may
take a few seconds to appear.
Press
MENU
on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
selected by pressing
C
or
c
on the remote control, its
respective options will appear below.
NOTE:
The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are not
available in a mode, they will appear greyed out.
To use the option, press
B
and
b
on the remote control to
move up and down and press
C
or
c
to select your desired
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
To alter the volume gently touch –
2
+.
To alter the programme position touch
b
p
B
.
Touch
MENU
and –
2
+ or
b
p
B
to control the sound and
picture options.
Touch
MENU
to finish.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected via
USB 1 (USB 2 provides access to photos only).
NOTE:
The USB socket has limited functionality and Toshiba can
take no responsibility for damage to other connected equipment.
The USB 2 socket has to be used with the “TOSHIBA Dual Band
WLAN Adaptor WLM-10U2” in order to access a wireless
network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
To select an external input, press
o
until the appropriate input
source is selected.
Please always refer to the owner’s manual of the equipment to
be connected for full details.
RED LED – Standby
BLUE LED – Power on
ORANGE LED - Programme timer set
(
digital
only)
RED LED – Programme timer Active
(
digital
only)
POWER switch
(Full Power Down Option)
COMMON INTERFACE
The Common Interface is for a Conditional
Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM
may be automatically executed. At this
time, your Recording/Reminder
programming will be canceled.
GREEN LED – On Timer set
Control panel (touch sensor)
Ambient Light Sensor
USB 2 Wireless LAN adaptor
ready for a home network
USB 1 Media Player
Switching on
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Turning the television off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all televisions. This is
recommended when the television is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE:
Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
Using the remote control
Using the controls and connections
15
English
SETTING UP YOUR TV
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to
Standby
.
To set up the television, use the buttons on the
remote control as detailed on page 7.
a
Press the
1
button. The
Menu Language
screen will
appear. This screen will appear the first time that the
television is switched on and each time
Reset TV
is
selected.
b
Press
B
,
b
,
C
, or
c
to select the menu language, and
then press
OK
.
c
Highlight
Country
and
C
or
c
to select. The television
is now set to tune the stations for your country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select
Others
.
d
Press
OK
, and the
Location
screen will appear.
e
Press
C
or
c
to select
Home
or
Store
. For normal
home use, select
Home
.
f
Press
OK
. If
Store
is selected in step 5, a
Store mode
confirmation window will appear. If you select
Yes
from that window, the TV will proceed to the
Auto
Demo
setup screen.
g
Press
OK
, and the
TV Mounting
screen will appear,
press
C
or
c
to select
Stand
or
Wall
.
h
Press
OK
, and the
AutoView
screen will appear, press
C
or
c
to select
Yes
or
No
.
i
Press
OK
. If the
Ant/Cable/Satellite
screen appears,
press
B
or
b
to select
Antenna
,
Cable
or
Satellite
,
and then press
OK
to check ( ).
If DVB-C is not supported in your area,
Cable
will not
be displayed.
• When you select
Antenna
or
Cable
, follow steps 10
to 13.
• When you select
Satellite
, skip to step 14.
• When you select
Antenna
(or
Cable
) and
Satellite
,
the Satellite Settings startup screen will appear
automatically after completing the
Antenna
(or
Cable
) scan and pressing
OK
.
j
Select
Next
and press
OK
. The
Auto Tuning
startup
screen will appear with the option to select between
DTV and ATV
,
DTV
or
ATV
if available. Use
C
or
c
to select the appropriate mode.
k
Press
B
or
b
to highlight
Start Scan
, and then press
OK
.
The television will start to search for available
DTV
and/or
ATV
channels. The progress bar will indicate
the scan status.
Quick Setup
Quick Setup
Country
Germany
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Location
Home
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
TV Mounting
Stand
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
SOUND menu.
AutoView
No
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
Ant / Cable / Satellite
Satellite
Cable
Next
Antenna
16
SETTING UP YOUR TV
English
You must allow the television to complete the search.
When the search is complete, the television will
automatically select position one.
The
Auto Tuning
screen will display the total number
of services found.
l
Press
C
or
c
to view the
DTV
(digital channel) or
ATV
(analogue channel) lists.
m
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
In
ATV
mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
.
REMEMBER:
Press
TV
at any time to select between
ATV
and
DTV
(DTV Ant TV/RADIO/TEXT, DTV Cable
TV/RADIO/TEXT, DTV Sat TV/RADIO/TEXT if available)
modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting
in the
DTV Settings
screen.
Select
Next
and press
OK
. The
Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” section on page 17.
Highlight
Done
and press
OK
.
If your satellite dish is movable, the following
Positioning
screen will appear.
Press
B
or
b
to highlight
Positioning
, and then press
C
or
c
to find the dish position with the strongest
signal level.
Press
B
or
b
to highlight
Store Position
and press
OK
to store the dish position. Repeat steps 14 and 15
for the next satellite as needed.
If your satellite dish is not movable, the
Positioning
screen will not appear.
Adjust the dish position manually for maximum Signal
Level strength.
Highlight
Done
and press
OK
.
If the reception testing completes successfully, the
Auto Tuning
startup screen will display.
You can select
Scan Option
from
Free to Air
and
All
.
Press
B
or
b
to highlight
Start Scan
, and then press
OK
.
The television will start to search for available
DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the
Auto Tuning
results
screen will display the total number of services found.
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
1 1
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type None
LNB Power On
Done
PLEASE NOTE
The
Quick Setup
menu can also be accessed at any
time from the
SETUP
menu.
Positioning
Signal Level
Go to Stored Position
Store Position
Transponder 1/83 (10743 MHz H)
Positioning W E
Go to 0
Satellite : ASTRA 19.2°E
Step Size 1
Auto Tuning - Satellite
Start Scan
Satellite
Free to Air
ASTRA(19.2°E)
Scan Option
17
SETTING UP YOUR TV
English
From this menu, you can set the RF input configuration.
a
Press
MENU
, and select
SETUP
menu.
b
Use
b
to highlight
Ant/Cable/Satellite
and use
C
or
c
to select
Antenna
,
Cable
or
Satellite
.
NOTE:
When you attempt to change the
Ant/Cable/
Satellite
setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for
Auto Tuning
.
c
When
Ant/Cable/Satellite
is set to
Cable
, the
following setting options will be provided in the
Auto
Tuning
screen.
Press
B
or
b
to select an item, and then press
C
or
c
to select your desired option.
With the exception of
DTV Scan Type
and
DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto
where the values for each item are preset by
the system. The second is an
Input
mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input
state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full Scan
will
be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
From the SETUP menu, you can add the satellites that you wish
to tune and configure detailed settings for each one
individually.
To add a satellite:
a
Press
MENU
and use
C
or
c
to select
SETUP
menu.
b
Use
b
to highlight
Satellite Settings
. Press
OK
.
c
Press
b
to highlight a new line to add an another
satellite, and press
OK
.
d
Press
b
until the required satellite is displayed and press
OK
.
Ant/Cable/Satellite (if available)
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
Satellite Settings
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
1 1
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type None
LNB Power On
Done
18
SETTING UP YOUR TV
English
To delete a satellite:
a
In the
Satellite Settings
menu, press
B
or
b
to
highlight the satellite you want to delete.
b
Press the
RED
button. A confirmation window will
appear.
c
Press
C
or
c
to select
Yes
and press
OK
.
NOTE:
It is not possible to delete position No.1.
To edit the satellite settings:
a
In the
Satellite Settings
menu, press
B
to highlight
Switch Type
.
b
Press
C
or
c
to select
None
,
ToneBurst
,
DiSEqC
2way
or
DiSEqC 4way
as your satellite switch type.
c
Press
b
to highlight
LNB Power
and press
C
or
c
to
select
On
or
Off
.
To add a transponder:
a
In the
Satellite Settings
menu, press
B
or
b
to
highlight the line you want to edit and press
OK
.
b
Press the
GREEN
button. The
Transponder Settings
screen will appear.
c
Press
B
to highlight a new line.
d
Press
OK
.
e
Edit each parameter as required and press
OK
. See
page 18
.
To delete a transponder:
a
In the
Transponder Settings
menu, press
B
or
b
to
highlight the line you want to delete.
b
Press the
RED
button.
To edit the Transponder Settings:
a
In the
Transponder Settings
menu, press
B
or
b
to
highlight the line you want to edit and press
OK
.
b
Press
C
or
c
to select
Frequency
,
Polarisation
,
Symbol Rate
or
S/S2
, and set the item using the
number buttons if necessary.
c
Press
OK
to save your settings.
d
Repeat steps 1 through 3 for other lines.
e
Press
BLUE
to finish editing and return to Satellite
Settings.
Press
GREEN
to cancel any edits that were made this
time.
Press
YELLOW
to reset all transponder settings to their
initial default settings.
ASTRA 19.2˚E
1 1 1
Transponder Settings
1 10743 H
Frequency Polarisation Symbol Rate S/S2
7 10861
8 10876
2 10773
3 10788
4 10817
5 10832
6 10847
H
V
H
V
V
H
V
22000
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
S
Transponder Settings
76 12640 V
Frequency Polarisation Symbol Rate S/S2
82 12728
83
77 12662
78 12669
79 12692
80 12699
81 12721
V
H
V
H
V
H
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
83 0H 0 S
83 12731 H 22000 S2
20
SETTING UP YOUR TV
English
For Satellite Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Press
B
or
b
to highlight
Satellite
and then press
C
or
c
to select the desired satellite (
No.1 Sat
~
No.4 Sat
or
All
).
You can select
Free to Air
or
All
as the Search Option.
Highlight
Start Scan
and press
OK
to continue with
the
Auto Tuning
.
When the search is complete, the
Auto Tuning
screen
will display the services found.
c
Use
b
or
B
to move through the list to select a
channel, and then press
OK
to view.
ATV Manual Tuning
The television can be tuned-in manually using
ATV Manual
Tuning
. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another
System
.
Use
C
and
c
t
o move across the screen and select any of the
ATV Manual Tuning options
.
Then use
B
or
b
to adjust the
settings
.
1
Position
The number to be pressed on the remote control to tune
the channel.
2
System
Specific to certain areas.
3
Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4
Skip
Set Skip to On (
8
) or Off (
(
) for the selected channel.
See page 21
5
Signal Class
The channel classification.
6
Channel
The channel number on which a station is being broadcast.
7
Search
Search up and down for a signal.
8
Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 74.
9
Station
Station identification. Use the
B
or
b
and
C
or
c
buttons
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
AllSatellite
Free to AirSearch Option
Start Scan
Tuning
ATV Manual Tuning
System
1 A C 2 0 V C R I
1 2 3 4 65 7 8 9
21
SETTING UP YOUR TV
English
a
Press
MENU
and use
C
or
c
to select the
SETUP
menu. Press
b
to highlight
ATV Manual Tuning
and
press
OK
to select.
b
Use
B
or
b
to highlight the desired position. We
suggest
Pos. 0
for a media recorder.
c
Press
OK
to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d
Press
c
to select
System
and use
B
or
b
to change if
required.
e
Then press
c
to select
Search
.
f
Press
B
or
b
to begin the search. The search symbol
will flash.
g
Each signal will show on the television. If it is not your
media recorder, press
B
or
b
again to restart the
search.
h
When your media recorder signal is found, press
c
to
move along to
Station
. Use
B
,
b
,
C
and
c
to put in
the required characters,
e.g.
VCR
.
i
Press
OK
to save.
j
Repeat for each
position
you want to tune, or press
RETURN
to return to the list of channels and select the
next number to tune.
k
Press
EXIT
when you have finished.
To prevent certain channels from being viewed, positions can be
skipped.
a
Select
ATV Manual Tuning
from the
SETUP
menu.
b
Use
B
or
b
to highlight the position to be skipped and
press
OK
to select.
Different
Channel
numbers may be displayed.
SETUP
Menu Language English
Country
Ant/Cable/Satellite
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Satellite Settings
Germany
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System
1 A C 2 0 I
ATV Manual Tuning
Search
1 C 2 0 I A
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known.
Select the
ATV Manual Tuning
screen in
Step 3
.
Enter the
Position number
, the
System
, then
C
for
standard (terrestrial) channels or
S
for cable
channels and the
Channel
number. Press
OK
to
save.
Skip
ATV Manual Tuning
Station
1 A C 2 0 V C I R
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40 ABC1
ABC1C22
5
C25
C28
C30
23
SETTING UP YOUR TV
English
When
Ant/Cable/Satellite
is set to
Cable, DTV Manual
Tuning
items are as follows:
Frequency
– input a specific frequency to be scanned
Modulation
– choose from one of five QAM modulation
options
Symbol Rate
– input a specific baud rate (KS/s) to be used for
the manual scan
Highlight
Start Scan
, and then press
OK
.
When
Ant/Cable/Satellite
is set to
Satellite, DTV Manual
Tuning
items are as follows:
Use
B
or
b
to highlight an item (
Satellite
,
Transponder
,
Frequency
,
Symbol Rate
,
Polarisation
or
Search Option
),
and then press
C
or
c
to select the required option.
Highlight
Start Scan
, and then press
OK
.
DTV Settings
The channel order may be changed to suit your personal
preference.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Select
Channels
and press
OK
.
c
For your convenience, you can jump to specific places
in the list by one of two methods.
Line Number Jump
— Use the
number buttons
(0-9) to input the line number you want to select, and
then press
OK
.
Station Letter Jump
— Press
CC
or
cc
to jump
to the next station name with a different initial letter.
It is also possible to change the Position number of a
particular channel.
Renumber
— Press the
RED
button to renumber the
highlighted channel. Edit the channel number using
the
number buttons
and press
OK
.
Manual Tuning for DVB-C
Manual Tuning for DVB-S
DTV Manual Tuning - Satellite
WEAK
Signal Strength
Quality
Satellite
POOR
Start Scan
STRONGAVERAGE
ASTRA 28.2°E
Transponder 1/83
Frequency 10714 MHz
Symbol Rate 22000 KS/s
Polarisation H
Search Option Free to Air
Channels (Antenna/Cable)
DTV Settings
Channels
PIN Setting
Subtitle and Audio
Parental Control
Local Time Setting
DVB Character Set
Dynamic Scan
Standby Channel Update
Standard
Off
On
Channels
Line No. 1/10
TV
1 ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
ABC ONE
Pos.
- - - -
Name
24
SETTING UP YOUR TV
English
Move
— Press the
GREEN
button to activate the
Move
feature. Use the
B
or
b
buttons to select the
channel you wish to move and press
OK
to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat as
necessary.
Once all desired channels have been checked, use the
B
or
b
buttons to place the focus at the position to
which you wish to move the channels. The channels
will be inserted above the highlighted channel. Press
the
GREEN
button to execute the move.
Sort
— Press the
YELLOW
button. A confirmation
window will appear. Press
C
or
c
to select
Yes
and
press
OK
.
The
Sorting Type
selection window will appear.
Press
C
or
c
to set the sorting type.
A - Z
Station name order (A to Z)
Channel Number
Position No. order (numerical
sequence)
Press
b
to highlight
Sort
and press
OK
.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Select
Channels
and press
OK
.
The satellite channel list will appear.
c
For your convenience, you can edit and sort your
channel list.
Line Number Jump
— Use the
number buttons
(0-9) to input the line number you want to select, and
then press
OK
.
Station Letter Jump
— Press
CC
or
cc
to jump
to the next station name with a different initial letter.
Satellite Jump
— Press
Z
or
z
to jump to the
next channel on a different Satellite.
Renumber
— Same as Antenna/Cable channels.
See page 23.
Move
— Same as Antenna/Cable channels. See
page 24.
Sort
— Press the
YELLOW
button. A confirmation
window will appear. Press
C
or
c
to select
Yes
and
press
OK
.
The
Sort
menu will appear.
Channels
Line No. 1/10
TV
1 ABC ONE
Pos. Name
822 AA
823 AC
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
Sort
Your existing channel order will be lost. Do you wish to
continue?
Yes
Sorting Type A - Z
Sort
Sort
Channels (Satellite)
Channels
Line No. 4/1200
Satellite TV
1 DDD 19.2°E
Pos. Station Satellite
822 AA
823 AC
2 AB
3 E
801 BBC
802 BB
803 BA
25.6°E
25.6°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
Group By Satellite
Sorting Type Channel Number
Preset Order Yes
Sort
Sort
26
English
CONTROLS AND FEATURES
General controls
Quick Menu
helps you access some options quickly, such as
Picture Mode, Picture Size, More Information, Sleep
Timer
etc.
Press
QUICK
to display the
Quick Menu
and use
B
or
b
to
select the option.
NOTE: Quick Menu
items are different depending on the
current mode.
Quick menu item example
To select a position, use the numbered buttons on the remote
control.
Positions can also be selected using
P
U
and
P
u
.
To display on-screen information such as position, input mode
or stereo/mono signal, press . Press again to cancel.
The time display facility allows the current (text service) time to
be seen on the television screen.
Press
D
whilst watching a normal television broadcast to
see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE:
This display may not be available in some cases.
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions are
changed, disappearing after a few seconds. If the broadcast is
not in stereo, the word Mono will appear.
Stereo…
Press
s
to select
Stereo
or
Mono
.
Bilingual…
Bilingual transmissions are rare. If they are
transmitted, the word
Dual
will be displayed. Choose the
required programme number, and if the word
Dual
appears,
press
s
to select
Dual 1
,
Dual 2
or
Mono
.
For DTV programmes
For stereo or dual mono broadcasts, press
s
and use
C
or
c
to select settings.
For multi-audio track broadcasts, press
s
repeatedly to
change the audio language (see ‘Audio language’ on
page 63).
Quick Menu
Mode Quick menu item Description
When viewing a TV
programme or
pictures from the
external input
Picture Mode See page 31.
Picture Size See page 29.
More Information See page 59.
Channel Options See page 62.
YouTube See page 45.
Media Player See page 47.
Photo Frame See page 54.
Sleep Timer See page 58.
Speakers See page 70.
Wireless Information See page 40.
When using EPG Genre Colour See page 60.
EPG Update/
Cancel EPG Update
See page 60.
Media Player (Multi
View, List View)
Sort See page 50.
Interval Time See page 50.
Repeat See page 50.
Device Information See page 50.
Wireless Information See page 40.
Photo Frame PICTURE See page 31.
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
YouTube
Channel Options
TV Speakers
00:00
Sleep Timer
Media Player
Speakers
Photo Frame
Wireless Information
Selecting positions
The Time Display –
analogue
only
Stereo and Bilingual transmissions
Mode Display Pressing
c
Stereo Stereo
S
Left
S
Right
Dual mono Dual 1
S
Dual 2
Mono –
Multichannel –
27
CONTROLS AND FEATURES
English
Sound controls
Volume
Press
y
or
Y
to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
If a programme or film is being broadcast with a soundtrack in
more than one language, the
DUAL
feature allows selection
between them.
a
Press
MENU
and
C
or
c
to select the
SOUND
menu.
b
Press
b
to highlight
Dual
, and then press
C
or
c
to
choose between
Dual 1
or
Dual 2
.
The sound controls are accessible in
digital
and
analogue
modes.
a
Select the
SOUND
menu.
b
Press
b
to highlight
Balance
, and then press
C
or
c
to emphasize left or right speaker balance.
You can customize current sound mode settings. Select the
appropriate mode in accordance with the installation location of
the TV (
Stand
or
Wall
) and adjust the equalizer on-screen as
desired.
a
Select the
SOUND
menu.
b
Press
b
to highlight
Advanced Sound Settings
, and
then press
OK
.
c
Press
b
to highlight
Sound Navi
, and then press
OK
.
d
Press
C
or
c
to select either
Stand
or
Wall
depending
on how your TV is installed, and then press the RED
button.
e
Press
C
or
c
to select the frequency range you want to
adjust from the equalizer window, and then press
B
or
b
to adjust the level.
f
Repeat step 5 for other frequencies.
Surround
,
Voice Enhancement
, and
Dynamic Bass Boost
help to create an enhanced surround sound experience with
deep, rich bass from stereo sound sources. Your TV’s audio will
sound fuller, richer, and wider.
a
In the
SOUND
menu, press
b
to highlight
Advanced
Sound Settings
, and then press
OK
.
b
Press
b
to highlight
Surround
, and then press
C
or
c
to select
Off
,
Spatial
or
Cinema
.
Volume controls and mute sound
Dual
Balance
Sound Navi
Dual
Balance
Advanced Sound Settings
Audio Level Offset
Audio Description
0
Dual 1
Dolby Volume Low
Dynamic Range Control Off
SOUND
Surround Settings
Surround Off
Voice Enhancement On
Sound Navi
Dynamic Bass Boost High
Advanced Sound Settings
TV Mounting Stand
Sound Navi
+20
0
-20
100 330 1K 3.3K 10K [Hz]
2 1 0 1 2 [Level]
Equalizer
Surround Off
Voice Enhancement
Sound Navi
On
Dynamic Bass Boost High
Advanced Sound Settings
29
CONTROLS AND FEATURES
English
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.
SUBTITLE
SUBTITLE
SUPER LIVE
This setting will enlarge a 4:3 image
to fit the screen by stretching the
image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
may occur.
When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to ensure
that all the text is displayed.
CINEMA
When watching ‘all sides panel
format’ films/video tapes, this setting
will eliminate or reduce the black
bars at all sides of the screen by
zooming in and selecting the image
without distortion.
WIDE
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be visible
on the top and bottom of the screen.
4:3
Use this setting to view a true 4:3
broadcast.
14:9
Use this setting when watching a
14:9 broadcast.
30
CONTROLS AND FEATURES
English
Press the button on the Remote to display the list of available widescreen formats.
Press the button repeatedly to highlight the required format.
The
Quick Menu
feature can also be used to select
Picture Size
.
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public
display or commercial gain may infringe on copyright laws.
Dot by Dot
PC NORMAL
This setting will show the picture
without overscan, i.e. WYSIWYG.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
PC WIDE
This setting will show the picture
without overscan or side panels.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
“Dot by Dot”
is a non-scaling display.
Depending on the input signal format,
the picture is displayed with side
panels and/or bars at the top and
bottom (e.g. VGA input source).
NATIVE
This setting will show the picture
without overscan, i.e. WYSIWYG.
Picture Size
4:3
Super Live
Wide
Native
Cinema
14:9
Subtitle
Picture Size
PC Wide
Dot by Dot
PC Normal
AV format PC format
31
CONTROLS AND FEATURES
English
Picture controls
Most of the picture controls and functions are
available in both
digital
and
analogue
modes.
PLEASE NOTE: features not available will be greyed
out
.
This television offers the choice of personalising the picture
style.
AutoView
,
Dynamic
,
Standard
,
Hollywood 1
,
Hollywood
2
,
Store
,
Game
and
PC
are preset options and affect many
features/settings within the television.
NOTE:
• Because the
AutoView
mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, the
Auto Brightness Sensor
and
Expert Mode
menus are greyed out when it is selected.
•
Store
mode is only available when
Location
is set to
Store
.
•
Game
mode is available in external input mode (other than
aerial input). When you select
Game
mode, suitable
widescreen formats will be selected.
•
PC
mode is available in RGB/PC input mode or HDMI input
mode.
a
In the
PICTURE
menu, press
b
to select
Picture
Mode
.
b
Press
C
or
c
to select the picture mode you prefer and
press
OK
.
NOTE:
The picture mode you select affects the current input
only. You can select a different picture mode for each input.
You can customize current picture mode settings as desired. For
example, while selecting “
Dynamic
”, if you change the
following items, such as
Backlight
,
Contrast
,
Brightness
,
Colour
,
Tint
,
Sharpness
and the
Advanced Picture Settings
items, your new settings are saved for “
Dynamic
” picture
mode.
a
In the
PICTURE
menu, press
b
to select either
Backlight
,
Contrast
,
Brightness
,
Colour
,
Tint
or
Sharpness
and press
OK
.
b
Press
C
or
c
to adjust the settings.
This feature resets all picture settings to the factory settings
except
Picture Mode
.
a
In the
PICTURE
menu, press
b
to select
Reset
and
press
OK
.
b
A confirmation message will appear. Press
C
or
c
to
select
Yes
and press
OK
.
When
ColourMaster
is set to
On,
it allows the ‘Base Colour
Adjustment’ feature to become available.
a
In the
PICTURE
menu, press
b
to select
Advanced
Picture Settings
and press
OK
.
b
Press
b
to select
ColourMaster
.
c
Press
C
or
c
to select
On
or
Off
, and then press
OK
.
Picture Mode
Picture Mode
Reset
Backlight
Colour
Tint
Sharpness
100
100
0
0
0
0
Dynamic
Contrast
Brightness
PICTURE
Picture preferences
Reset
Colour Master
ColourMaster
Base Colour Adjustment
Colour Temperature
Black/White Level
Static Gamma
Noise Reduction
10
10
0
Off
On
Auto Brightness Sensor Settings
Active Backlight Control
Advanced Picture Settings
32
CONTROLS AND FEATURES
English
The
Base Colour Adjustment
feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Base Colour Adjustment
, and then press
OK
.
b
Press
B
or
b
to select an option, and then press
c
to
move to the adjustment window.
c
Press
C
or
c
to select
Hue
,
Saturation
or
Brightness
, and then press
B
or
b
to adjust the
settings as required.
d
Press
RETURN
to return to the previous menu.
To return to the factory settings, select
Reset
and press
OK
.
Colour Temperature
increases the ‘warmth’ or ‘coolness’ of
the picture by increasing the red or blue tint.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Colour Temperature
and press
OK
.
b
Press
C
or
c
to adjust the level.
The adjustment range is 0 (warm) to 10 (cool).
NOTE:
If
Picture Mode
is set to
AutoView
, the adjustment
range is -5 to +5.
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Auto Brightness Sensor Settings
and press
OK
.
b
Press
C
or
c
to select
On
and press
OK
.
c
Press
b
to select
Backlight Adjustment Pro
and
press
OK
.
d
The
Backlight Adjustment Pro
window will appear.
Press
OK
again to display the adjustment window.
e
Press
C
or
c
to select a point and press
B
or
b
to
adjust the level.
f
Press
OK
to fix the adjustment.
To cancel the adjustment when selecting a point, select
Cancel
and press
OK
.
To return the adjustments of all points to the factory
defaults, select
Reset
and press
OK
.
Base Colour Adjustment
Colour Temperature
Hue Saturation
Reset
Brightness
0Red
Green
Blue
Yellow
Magenta
Cyan
0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Base Colour Adjustment
Hue Saturation Brightness
0Red 0 -1
Auto Brightness Sensor Settings
Auto Brightness Sensor Settings
Backlight Adjustment Pro
Auto Brightness Sensor On
100
0
Backlight Adjustment Pro
Backlight Control Level
Control
Level
Ambient Light
48
Cancel
Reset
33
CONTROLS AND FEATURES
English
When
Active Backlight Control
is activated, it will
automatically optimize the backlighting levels for dark scenes.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Active Backlight Control
.
b
Press
C
or
c
to select
On
or
Off
.
Black/White Level
increases the strength of dark areas of the
picture to improve the definition.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Black/White Level
.
b
Press
C
or
c
to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.
The static gamma feature allows you to adjust the levels of black
in the picture.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Static Gamma
.
b
Press
C
or
c
to adjust the level.
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the
MPEG NR
feature reduces this effect by smoothing
out the edges.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Noise Reduction
and press
OK
.
b
Press
b
to select
MPEG NR
.
c
Press
C
or
c
to select
Low
,
Middle
,
High
or
Off
to
suit your preference.
DNR
allows you to ‘soften’ the screen representation of a weak
signal to reduce the noise effect.
a
Select
DNR
from the
Noise Reduction
menu.
b
Use
C
or
c
to select
Low
,
Middle
,
High
,
Auto
or
Off
.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
The
Resolution+
feature allows you to adjust the clarity levels
for your desired picture settings.
a
In the
Advanced
Picture Settings
menu, press
b
to
select
Resolution+
and press
OK
.
b
In the
Resolution+
field, select
On
.
c
Press
b
to highlight
Level
, and then press
C
or
c
to
adjust the level.
NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
This feature will reduce picture blur without decreasing image
brightness or adding flicker.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Active Vision M100.
b
Press
C
or
c
to select
On
or
Off
.
NOTE:
When
Picture Mode
is set to
Game
, this feature will
be grayed out and automatically set to
Off
.
Active Backlight Control
Black/White Level
Static Gamma
MPEG NR – Noise Reduction
Noise Reduction
DNR
MPEG NR Low
Auto
DNR – Digital Noise Reduction
Resolution+
Active Vision M100
Resolution+
Level
Resolution+ On
3
34
CONTROLS AND FEATURES
English
The
Film Stabilization
feature allows the adjustment of motion
smoothness.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Film Stabilization
.
b
Press
C
or
c
to select
Standard
,
Smooth
or
Off
.
NOTE:
• When
Picture Mode
is set to
AutoView
, the
Film
Stabilization
feature will have an additional “
Auto
” mode.
• When
Picture Mode
is set to
Game
, this feature will be
grayed out and automatically set to
Off
.
This feature allows you to reset the current
Advanced Picture
Settings
to the default values.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Reset
.
b
Press
OK
.
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without removing
the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a
In the
PICTURE
menu, press
B
or
b
to select
Expert
Picture Settings
, and then press
OK
to display
Expert
Picture Settings
menu.
b
Press
B
or
b
to select
Test Pattern
.
c
Press
C
or
c
to select
On
.
d
Press
EXIT
to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more accurate
adjustment of each colour.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
RGB Filter
, and then press
OK
.
b
Press
B
or
b
to select
Red
,
Green
or
Blue
to adjust.
c
Press
C
or
c
to select
On
.
d
Press
b
to select
Colour
or
Tint
, and then press
C
or
c
to adjust.
e
Press
EXIT
.
NOTE:
It is not possible to turn off all three colours
simultaneously.
White Balance-
Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
White Balance
, and then press
OK
.
b
Press
B
or
b
to select
Window Display
and press
C
or
c
to select
On
.
c
Press
EXIT
to close.
White Balance-
Setting Type
You can select a way of the white balance’s setting.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
White Balance
, and then press
OK
.
b
Press
B
or
b
to select
Setting Type
and press
C
or
c
to select
2P
or
10P
.
White Balance-
2P White Balance
a
Press
b
to select
2P White Balance
.
b
Press
B
or
b
to select
Red-Offset
,
Green-Offset
,
Blue-Offset
,
Red-Gain
,
Green-Gain
, or
Blue-
Gain
.
c
Press
C
or
c
to adjust.
White Balance-
10P White Balance
a
Press
b
to select
10P White Balance
.
b
Press
B
or
b
to select
IRE
,
Red
,
Green
, or
Blue
.
c
Press
C
or
c
to adjust.
NOTE:
The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)
Film Stabilization
Resetting the advanced picture settings
Expert Picture Settings
35
CONTROLS AND FEATURES
English
White Balance-
Copy to All Inputs
This feature copies White Balance on the current input to all
other inputs that are set to the same picture mode. Individual
settings that are not allowed for a specific input will not be
copied.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
White Balance
and then press
OK
.
b
Press
B
or
b
to select
Copy to All Inputs
, and then
press
OK
.
A confirmation screen appears.
c
Select
Yes
, and then press
OK
.
Resetting to the factory defaults
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
Reset
, and then press
OK
.
A confirmation screen appears.
b
Select
Yes
, and then press
OK
.
This feature displays the brightness histogram and control curve
of the current video signal.
a
In the
PICTURE
menu, press
b
to select
Control
Visualization
and press
OK
. The histogram window
will appear.
b
Press
RETURN
to return to the previous menu.
When this television receives a true Widescreen picture and
Auto format
is
On
, it will automatically be displayed in
Widescreen format irrespective of the television’s previous
setting.
a
Press
MENU
and
C
or
c
to select the
PREFERENCES
menu.
b
Press
b
to select
Display Settings
and press
OK
.
c
Press
b
to select
Auto Format
, and then press
C
or
c
to select
On
or
Off
.
When
4:3 Stretch
is activated, the size switching system
changes 4:3 programmes into full screen picture.
a
In the
PREFERENCES
menu, press
b
to select
Display
Settings
, and press
OK
.
b
Press
b
to select
4:3 Stretch
, and then press
C
or
c
to select
On
or
Off
.
When
Blue Screen
is selected, the screen will turn blue and the
sound will be muted on analogue channels and external input
modes when no signal is received.
NOTE:
Some external input sounds may not be muted.
a
In the
PREFERENCES
menu, press
b
to select
Blue
Screen
.
b
Press
C
or
c
to select
On
or
Off
.
Control Visualization
Brightness
Number
Of
Pixels
Output
Control Visualization
Distribution
Input
Control Curve
Automatic Format (Widescreen)
4:3 Stretch
Blue Screen
Auto Format On
4:3 Stretch Off
Picture Position
Display Settings
36
CONTROLS AND FEATURES
English
The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.
a
In the
PREFERENCES
menu, highlight
Display
Settings
and press
OK
.
b
In the
Display Settings
menu, highlight
Picture
Position
.
c
Press
OK
to view the options available for the picture
format that has been selected.
d
Press
B
and
b
to select an option, and then
C
or
c
to adjust the settings.
The options differ depending on the currently selected
widescreen format and the input signal.
In
Cinema
mode:
To return to the original factory settings, select
Reset
in the
Picture Position
menu and press
OK
.
This feature is used to hold a still image on the screen.
Press
r
to hold an image on the screen, and press
r
again to cancel.
When the HDMI Information Display feature is On and you are
watching an HDMI input source, pressing the button
displays the HDMI signal information banner.
a
In the
PREFERENCES
menu, press
b
to select
HDMI
Information Display
.
b
Press
C
or
c
to select
On
.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate, Aspect, Bit Depth,
Colour Space, RGB/YUV, Chroma Format, and
Content Type (if available).
Picture Position
Picture still
HDMI Information Display
Auto Format On
4:3 Stretch Off
Picture Position
Display Settings
0
0
Picture Position
Horizontal Position
Reset
Vertical Position
38
CONTROLS AND FEATURES
English
Setting up the Network
You can select the Network Type.
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Network Type
, and then
press
C
or
c
to select
Wired
or
Wireless
.
NOTE:
If the Dual Band WLAN Adaptor is not
connected, Wireless cannot be selected.
c
If you selected
Wired
, see “Advanced Network Setup”
on page 40.
NOTE:
• This feature is grayed out when the Dual Band WLAN
Adaptor is not connected or Network Type is set to Wired.
• Continued connection of AP (Access Point) is not guaranteed.
The connection may be disconnected while watching TV.
• Do not remove the Dual Band WLAN Adaptor when
Network Type
is set to
Wireless
or wireless communication
is active.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make connection of
wireless LAN equipment and security setup easy. WPS will
automatically configure all wireless settings.
Assisted Setup
(setup by using the AP’s notification
information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You will manually set the
Security Key.
Manual Setup
(manual input of all settings)
Easy Setup using PBC (Push Button Configuration)
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Wireless Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Easy Setup
, and press
OK
.
d
Press
C
or
c
to select
PBC
.
e
Press
b
to highlight
Start Scan
, and press
OK
.
f
Following the on-screen instructions, push the
appropriate button on your AP.
g
When a window reporting that the setup is complete
appears, press
OK
.
To cancel searching for the AP:
Press
RETURN
while searching for the AP. A message
will appear, and then press
C
or
c
to select
Yes
and
press
OK
.
Easy Setup using PIN (Personal Identification
Number)
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Wireless Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Easy Setup
, and press
OK
.
d
Press
C
or
c
to select
PIN
.
e
Press
b
to highlight
Start Scan
, and press
OK
.
f
Press
B
or
b
to select the desired AP and press
OK
.
NOTE:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
g
When the PIN code window appears, enter the
displayed PIN into your AP, and then press
Next
to
continue the PIN Setup. When a message displays to
report that the setup is complete, press
OK
.
Wireless Setup
Network Setup
Media Renderer Setup
Display Settings
Network Lock
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Panel Lock Off
PREFERENCES
Network Type Wired
Network Connection Test
Advanced Network Setup
Network Setup
Wireless Setup
Easy Setup On
Enhanced 11n Off
Manual Setup
Wireless Setup
Assisted Setup
40
CONTROLS AND FEATURES
English
Wireless Information
The settings configured in Wireless Setup can be confirmed.
a
Press
QUICK
to open the
Quick Menu
.
b
Press
B
or
b
to select
Wireless Information
and
press
OK
.
c
When the AP connection succeeds, a Wireless
Information window will appear.
NOTE:
Press the
RED
button to scan for all available
APs.
NOTE:
Even if an AP for IEEE 802.11n is used when
Encryption
is set to
WEP
or
TKIP
, the Speed value might be
low. It is recommended that
Encryption
be changed to
AES
(see “Manual Setup” on
see page 39
).
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various surrounding
interference.
NOTE:
• When the DHCP function of the router connected with this TV
is On, you can set
Auto Setup
to
On
or
Off
.
(This should usually be set to
On
.)
• When the DHCP function of the router is Off, set
Auto Setup
to
Off
, and set the IP Address manually.
IP Address Setup
Auto Setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network
Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
IP Address Setup
, and
press
OK
.
Item Description
Status
Connected
is displayed when the TV is
connected with the AP.
Disconnected
is displayed when the TV is
not connected with the AP.
Signal Connection signal strength with AP
(
STRONG
/
MEDIUM
/
WEAK
)
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel Channel in use (1-165)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC
Address
The AP’s MAC address is displayed when
the TV is connected with the AP.
USB MAC
Address
The MAC address of the USB (Dual Band
WLAN Adaptor) is displayed.
DHCP
Enabled
is displayed when using DHCP.
Disabled
is displayed when not using
DHCP.
IP Address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default
Gateway
Address of the Default GATEWAY
DNS Address of the DNS
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
YouTube
Channel Options
TV Speakers
00:00
Sleep Timer
Media Player
Speakers
Photo Frame
Wireless Information
Advanced Network Setup
Network Type Wired
Advanced Network Setup
Network Setup
Wireless Setup
IP Address Setup Wired
MAC Address
DNS Setup
Advanced Network Setup
41
CONTROLS AND FEATURES
English
d
Highlight
Auto Setup
, and then press
C
or
c
to select
On
.
NOTE:
Other items will be grayed out when
Auto Setup
is set
to
On
.
Manual Setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
IP Address Setup
, and
press
OK
.
d
Highlight
Auto Setup
, and then press
C
or
c
to select
Off
.
e
Press
B
or
b
to highlight
IP Address
.
f
Press
C
or
c
to highlight the field you want to change,
and then use the number buttons to input the IP
address. To save the setting, press
OK
.
NOTE:
IP address field numbers must be between 0
and 255. After each field number has been set, press
OK
to store the entire address. If the entire IP Address
is invalid, a warning message will appear after
OK
is
pressed.
g
Press
B
or
b
to highlight
Subnet Mask
, and edit in
the same way as IP Address.
h
Press
B
or
b
to highlight
Default Gateway
, and edit
in the same way as IP Address.
NOTE:
If you manually set the IP address, you must not use the
same IP address for any other device. The IP address you use
should be a private address.
NOTE:
When the DHCP function of the router connected to
this TV is Off, set Auto Setup to Off, and manually set the DNS
address(es). Your internet service provider should have
provided these to you.
Auto setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
DNS Setup
, and press
OK
.
d
Highlight
Auto Setup
, and then press
C
or
c
to select
On
.
NOTE:
Other items will be grayed out when
Auto Setup
is set
to
On
.
Manual setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
DNS Setup
, and press
OK
.
d
Highlight
Auto Setup
, and then press
C
or
c
to select
Off
.
e
Press
B
or
b
to highlight
Primary DNS Address
.
f
Press
C
or
c
to highlight the field you want to change,
and then use the number buttons to input the Primary
DNS Address. To save the setting, press
OK
.
NOTE:
DNS address field numbers must be between 0
and 255. If you input an incompatible number and
press
OK
, the field number will reset to the previous
value.
Auto Setup On
Subnet Mask
IP Address Setup
IP Address 133 . 177 . 108 . 157
255 . 255 . 255 . 0
Default Gateway . . .
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address 133 . 177 . 108 . 157
255 . 255 . 255 . 0
Default Gateway
. . .
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address 133 . 177 . 108 . 157
255 . 255 . 255 . 0
Default Gateway
. . .
DNS Setup
Auto Setup Off
Secondary DNS Address
DNS Setup
Primary DNS Address 133 . 177 . 108 . 157
255 . 255 . 255 . 0
Specyfikacje produktu
| Marka: | Toshiba |
| Kategoria: | Telewizja |
| Model: | 46VL748 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Toshiba 46VL748, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Telewizja Toshiba
11 Lutego 2025
10 Lutego 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
31 Grudnia 2025
31 Grudnia 2025
Instrukcje Telewizja
- Telewizja Sony
- Telewizja Yamaha
- Telewizja Samsung
- Telewizja Electrolux
- Telewizja AEG
- Telewizja Beko
- Telewizja LG
- Telewizja Küppersbusch
- Telewizja Xiaomi
- Telewizja Sharp
- Telewizja TCL
- Telewizja Pioneer
- Telewizja Lenovo
- Telewizja Philips
- Telewizja SilverCrest
- Telewizja Acer
- Telewizja Nokia
- Telewizja Hisense
- Telewizja Infiniton
- Telewizja Panasonic
- Telewizja Muse
- Telewizja Viewsonic
- Telewizja Nedis
- Telewizja AG Neovo
- Telewizja Medion
- Telewizja OK
- Telewizja Lenco
- Telewizja Polar
- Telewizja Marquant
- Telewizja Tesla
- Telewizja Westinghouse
- Telewizja Majestic
- Telewizja Jensen
- Telewizja ILive
- Telewizja Blaupunkt
- Telewizja Brandt
- Telewizja Vivax
- Telewizja Terris
- Telewizja Salora
- Telewizja Siemens
- Telewizja Teac
- Telewizja Casio
- Telewizja Iiyama
- Telewizja Citizen
- Telewizja Dual
- Telewizja Grundig
- Telewizja Haier
- Telewizja Soundmaster
- Telewizja Hyundai
- Telewizja Manhattan
- Telewizja Strong
- Telewizja ECG
- Telewizja Oyster
- Telewizja Icy Box
- Telewizja Bang & Olufsen
- Telewizja JVC
- Telewizja V7
- Telewizja Dell
- Telewizja Furrion
- Telewizja Funai
- Telewizja Oppo
- Telewizja TechniSat
- Telewizja Schneider
- Telewizja Krüger&Matz
- Telewizja Philco
- Telewizja CHiQ
- Telewizja Qilive
- Telewizja Uniden
- Telewizja Thomson
- Telewizja Ferguson
- Telewizja Wharfedale
- Telewizja Manta
- Telewizja Pyle
- Telewizja Cecotec
- Telewizja Marantz
- Telewizja AOC
- Telewizja Monster
- Telewizja Peerless-AV
- Telewizja Caratec
- Telewizja Nevir
- Telewizja Mitsubishi
- Telewizja Arçelik
- Telewizja Continental Edison
- Telewizja GoGen
- Telewizja Intenso
- Telewizja NEC
- Telewizja Polaroid
- Telewizja Aiwa
- Telewizja AKAI
- Telewizja Sanyo
- Telewizja Clatronic
- Telewizja Telefunken
- Telewizja Optoma
- Telewizja SVAN
- Telewizja Innoliving
- Telewizja Abus
- Telewizja Jay-Tech
- Telewizja Bush
- Telewizja Loewe
- Telewizja Kemo
- Telewizja VOX
- Telewizja Insignia
- Telewizja AYA
- Telewizja Element
- Telewizja Orima
- Telewizja Denver
- Telewizja Kernau
- Telewizja Aspes
- Telewizja Albrecht
- Telewizja Orion
- Telewizja Hitachi
- Telewizja Technika
- Telewizja Seiki
- Telewizja SereneLife
- Telewizja RCA
- Telewizja MBM
- Telewizja BenQ
- Telewizja Trevi
- Telewizja Lexibook
- Telewizja GPX
- Telewizja Sencor
- Telewizja Odys
- Telewizja Nabo
- Telewizja Nextbase
- Telewizja Zenith
- Telewizja Daewoo
- Telewizja Allview
- Telewizja Metz
- Telewizja Kunft
- Telewizja Grunkel
- Telewizja Alphatronics
- Telewizja XD Enjoy
- Telewizja RevolutionHD
- Telewizja FFalcon
- Telewizja Dyon
- Telewizja Reflexion
- Telewizja Megasat
- Telewizja Sogo
- Telewizja Proline
- Telewizja Finlux
- Telewizja Alden
- Telewizja Aldi
- Telewizja Airis
- Telewizja Aristona
- Telewizja Apex
- Telewizja Ziggo
- Telewizja Techwood
- Telewizja Walker
- Telewizja Saba
- Telewizja Antarion
- Telewizja Tevion
- Telewizja Proscan
- Telewizja Vestel
- Telewizja Tucson
- Telewizja Energy Sistem
- Telewizja Sagem
- Telewizja Sunstech
- Telewizja Sylvania
- Telewizja Sunny
- Telewizja Luxor
- Telewizja Nordmende
- Telewizja AudioAffairs
- Telewizja Magnum
- Telewizja Audiosonic
- Telewizja Kubo
- Telewizja Coby
- Telewizja Seg
- Telewizja Vivo
- Telewizja Daitsu
- Telewizja Changhong
- Telewizja Alba
- Telewizja Naxa
- Telewizja Star-Light
- Telewizja Fantec
- Telewizja Mpman
- Telewizja Sweex
- Telewizja Vizio
- Telewizja Cello
- Telewizja Mx Onda
- Telewizja Nikkei
- Telewizja Peaq
- Telewizja Hannspree
- Telewizja DGM
- Telewizja Yasin
- Telewizja Roadstar
- Telewizja Humax
- Telewizja MT Logic
- Telewizja Superior
- Telewizja Difrnce
- Telewizja ITT
- Telewizja Avtex
- Telewizja Inovia
- Telewizja Lin
- Telewizja Aconatic
- Telewizja NPG
- Telewizja Bluesky
- Telewizja Videocon
- Telewizja Xoro
- Telewizja Durabase
- Telewizja HKC
- Telewizja Edenwood
- Telewizja Woxter
- Telewizja Premier
- Telewizja Onn
- Telewizja Teleco
- Telewizja Packard Bell
- Telewizja Opera
- Telewizja LTC
- Telewizja JTC
- Telewizja Zalman
- Telewizja Horizon
- Telewizja United
- Telewizja SYLVOX
- Telewizja Doffler
- Telewizja FOX Electronics
- Telewizja Viewpia
- Telewizja JGC
- Telewizja Online
- Telewizja DirecTV
- Telewizja Tele 2
- Telewizja Graetz
- Telewizja Kogan
- Telewizja Telesystem
- Telewizja EKO
- Telewizja E-motion
- Telewizja Mitsai
- Telewizja Selfsat
- Telewizja High One
- Telewizja Tve
- Telewizja ISymphony
- Telewizja Pantel
- Telewizja Magnavox
- Telewizja ATYME
- Telewizja HCI
- Telewizja Inno-Hit
- Telewizja Engel
- Telewizja TechLine
- Telewizja Elements
- Telewizja Digihome
- Telewizja Englaon
- Telewizja Reflex
- Telewizja Astar
- Telewizja Visco
- Telewizja Tivax
- Telewizja H&B
- Telewizja Norcent
- Telewizja TELE System
- Telewizja TIM
- Telewizja Belson
- Telewizja Vision Plus
- Telewizja Sbr
- Telewizja Bauhn
- Telewizja Voxx
- Telewizja Rm 2000
- Telewizja Hoher
- Telewizja Felson
- Telewizja Mach Power
- Telewizja Elbe
- Telewizja Axing
- Telewizja CGV
- Telewizja Smart Tech
- Telewizja Séura
- Telewizja Mitzu
- Telewizja JTC24
- Telewizja Coocaa
- Telewizja Kivi
- Telewizja Smart Brand
- Telewizja Mystery
- Telewizja Linsar
Najnowsze instrukcje dla Telewizja
19 Marca 2025
19 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025