Instrukcja obsługi Toshiba 40L3400U

Toshiba Telewizja 40L3400U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Toshiba 40L3400U (143 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/143

Note: To display a High Definition

picture, the TV must be r eceiving a

High Definition signal (such as an

over-the-air High Definition TV

broadcast, a High Definition digital

cable program, or a High Def inition

digital satellite pr ogram). For details,

contact your TV antenna installer,

cable provider, or satellite provider

GMA300034011

5/14

If you need assistance:

Toshiba’s Support Web site support.toshiba.com

For more information, see “Troubleshooting” on page 121 in this guide.

Owner’s Record

The model number and serial number are on the back and side of your

television.

Print out this page and write these numbers in the spaces below. Refer

to these numbers whenever you communicate with your Toshiba dealer

about this television.

Model number: ___________________________________

Serial number: ___________________________________

Integrated High Definition

LED Television User’s Guide:

40L3400U

50L3400U

Dear Customer,

Thank you for purchasing this Toshiba LED TV. This

document will help you use the many exciting features

of your new LED TV. Before operating your LED TV,

carefully read this document completely.

WARNING

Improper location and installation of a television can

lead to the death of your child. Never place the

television on furniture or in a location where children

can climb up on and tip over the television. Please refer

to the Child Safety information in item 26) on page 5 of

the Important Safety Instructions/Installation section.

WARNING: If you decide to wall mount this

television, always use a mounting bracket that has

been Listed by an independent laboratory (such as

UL, CSA, ETL) and is appropriate for the size and

weight of this television. The use of inappropriate

or non-Listed mounting brackets could result in

serious bodily injury and/or property damage. See

“To Display your LED TV on the included Pedestal

Stand:” on page 6.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s

attention to Article 820-40 of the U.S. NEC, which

provides guidelines for proper grounding and, in

particular, species that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical. For

additional antenna grounding information, see item 33)

and item 35) on page 5.

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC

SHOCK DO NOT OPEN.

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USE R-SERVICEABLE P ARTS INSI DE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufﬁcient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

TOSHIBA CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to

making home entertainment safe and enjoyable.

• As you enjoy your television, please note that all televisions – new and old- must be supported on

proper stands or installed according to the manufacturer’s recommendations. Televisions that

are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,

may fall over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television

is placed.

• NEVER place the television on furniture that can easily be used as steps, such as a chest of

drawers.

• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped

over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your

ability to safely mount your television.

• ALWAYS use a mount that has been recommended by the television manufacturer and has a

safety certication by an independent laboratory (such as UL, CSA, ETL).

• ALWAYS follow all instructions supplied by the television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.

Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder

block construction. If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount

installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN

YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the

purchase of a at-panel television. Special care should be made in the placement of older CRT

televisions.

• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size

and weight.

• NEVER place your older CRT television on a dresser where children may be tempted to use the

drawers to climb.

• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

CE.org/safety

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug

has two blades with one wider than the

other. A grounding type plug has two

blades and a third grounding prong.

The wide blade or the third prong are

provided for your safety. If the provided

plug does not t into your outlet, consult an electrician

for replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or

pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11)

Only use attachments/accessories specied by

the manufacturer.

12)

Use only with the cart, stand, tripod, bracket, or

table specied by the manufacturer, or

sold with the apparatus. When a cart is

used, use caution when moving the cart/

apparatus combination to avoid injury

from tip-over.

13)

Unplug this apparatus during lightning storms or

when unused for long periods of time.

14)

Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as when power-supply cord

or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

Additional Safety Precautions

14a) CAUTION:

If the TV is dropped and the cabinet or

enclosure surface has been damaged or the TV

does not operate normally, take the following

precautions:

• ALWAYS turn off the TV and unplug the power cord

to avoid possible electric shock or re.

• NEVER allow your body to come in contact with any

broken glass or liquid from the damaged television.

The LCD panel inside the TV contains glass and a

toxic liquid. If the liquid comes in contact with your

mouth or eyes, or your skin is cut by broken glass,

rinse the affected area thoroughly with water and

contact your doctor immediately.

• ALWAYS contact a service technician to inspect the

TV any time it has been damaged or dropped.

15)

CAUTION:

• To reduce the risk of electric shock, do not use the

polarized plug with an extension cord, receptacle, or

other outlet unless the blades can be inserted

completely to prevent blade exposure.

• To prevent electric shock, match wide blade of plug

to wide slot; fully insert.

16)

CAUTION:

• Do not let children swallow any small parts included

on or with the product or play with the plastic bag.

Keep the small parts and the plastic bag out of the

reach of children.

17)

CAUTION:

• Do not let water or other liquids come into contact

with the product, as it may result in damage.

18)

WARNING:

• To prevent the spread of re, keep candles or other

open ames away from this product at all times.

• Keep the product away from direct sunlight, re or a

heat source such as a heater. This may reduce the

product life time or result in re.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and

heed all warnings when installing your TV:

19)

WARNING: Never expose the batteries

to excessive heat such as sunshine,

re, or the like.

20)

ALWAYS plug the product into an outlet that is located

in such a manner that it can be easily unplugged in

case the product requires service.

21)

NEVER route the product’s power cord inside a wall or

similar enclosed area.

22)

Never modify this equipment. Changes or

modications may void: a) the warranty, and b) the

user’s authority to operate this equipment under the

rules of the Federal Communications Commission.

23)

DANGER: RISK OF

SERIOUS PERSONAL

INJURY, DEATH, OR

EQUIPMENT DAMAGE!

Never place the TV on an unstable

cart, stand, or table. The TV may

fall, causing serious personal injury,

death, or serious damage to the TV.

Wide blade

24)

When selecting a location for the TV,

• NEVER allow any part of the TV to hang over the

edge of the supporting furniture,

• NEVER place the TV on tall furniture (for example,

entertainment centers or bookcases) without

anchoring both the furniture and the TV to a suitable

support,

• Never place cloth or other material between the TV

and the supporting furniture.

• NEVER allow children to climb on the TV

25)

To avoid damage to this product, never place or store

the TV in direct sunlight; hot, humid areas; or areas

subject to excessive dust or vibration.

26)

Always place the TV on the oor or a sturdy, level,

stable surface that can support the weight of the unit.

Secure the TV using one of the following methods:

(1) Secure the TV with a mounting screw (Recommended).

• Place the TV on a sturdy surface that has a sufcient

thickness and screw the unit on the surface securely

by using the mounting screw and the fall-prevention

screw hole.

• If secured to furniture or other movable objects, the

furniture must be secured to an immovable structure

using the method shown in item 2 below.

(2) Secure the TV with a sturdy strap to a wall stud,

pillar, or other immovable structure. When connecting

the strap:

- attach the strap to the TV using the hooks on the back

of the TV, the clips on the pedestal, or the hole in the

base of the pedestal as available.

- make sure the strap is tight, secure, and parallel to the

oor.

27)

The product shall not be exposed to dripping or

splashing, and that no objects lled with liquids, such

as vases, shall be placed on the apparatus.

28)

Never block or cover the slots or openings in the TV

cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar surface;

• too close to drapes, curtains, or walls; or

• in a conned space such as a bookcase, built-in

cabinet, or any other place with poor ventilation.

29)

Always leave a space of at least 4 (four) inches around

the TV. The slots and openings are provided to protect

the TV from overheating and to help maintain reliable

operation of the TV.

30)

Never allow anything to rest on or roll over the power

cord, and never place the TV where the power cord is

subject to wear or abuse.

31)

Never overload wall outlets and extension cords.

32)

Always operate this equipment from a 120V AC, 60 Hz

power source.

33)

Always make sure the antenna system is properly

grounded to provide adequate protection against

voltage surges and built-up static charges (see Section

810 of the National Electric Code).

34)

DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

• When installing a rooftop antenna, use extreme care

to make sure you are never in a position where your

body (or any item you are in contact with, such as a

ladder or screwdriver) can accidentally touch

overhead power lines. Never locate the antenna

near overhead power lines or other electrical

circuits.

• Never attempt to install any of the following during

lightning activity: a) an antenna system; or b) cables,

wires, or any home theater component connected to

an antenna or phone system.

Care

For better performance and safer operation of your

TOSHIBA TV, follow these recommendations and

precautions:

35)

If you use the TV in a room where the temperature is

32° F (0° C) or below, the picture brightness may vary

until the LED warms up. This is not a sign of

malfunction.

36)

WARNING: RISK OF SERIOUS

PERSONAL INJURY OR EQUIPMENT

DAMAGE!

• Never use chemicals (such as air fresheners,

cleaning agents, etc.) on or near the TV pedestal.

Studies indicate that plastics may weaken and crack

over time from the combined effects of chemical

agents and mechanical stress (such as the weight of

the TV). Failure to follow these instructions could

result in serious injury and/or permanent damage to

TV and TV pedestal.

• Always unplug the TV before cleaning. Gently wipe

the display panel surface (the TV screen) using a

dry, soft cloth (cotton, annel, etc.). A hard cloth may

damage the surface of the panel. Avoid contact with

alcohol, thinner, benzene, acidic or alkaline solvent

cleaners, abrasive cleaners, or chemical cloths,

4" min.

Sturdy strap (as short as possible)

TV side

Hook

TV top

which may damage the surface. Never spray volatile

compounds such as insecticide on the cabinet.

Such products may damage or discolor the cabinet.

37)

Never hit, press, or place anything on the back cover.

These actions will damage internal parts.

38)

WARNING:

RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into

the TV cabinet slots.

39)

During a lightning storm, do not touch the connecting

cables or product.

40)

For added protection of your TV from lightning and

power surges, always unplug the power cord and

disconnect the antenna from the TV if you leave the TV

unattended or unused for long periods of time.

41)

Always unplug the TV to completely disconnect from

mains power. When the TV is turned off using the on/

off switch, it is not completely disconnected from power

and a minute amount of current is still consumed.

42)

During normal use, the TV may make occasional

snapping or popping sounds. This is normal, especially

when the unit is being turned on or off. If these sounds

become frequent or continuous, unplug the power cord

and contact a Toshiba Authorized Service Provider.

43)

WARNING: RISK OF SERIOUS

PERSONAL INJURY OR EQUIPMENT

DAMAGE!

Never strike the screen with a sharp or heavy object.

44)

• The LCD screen of this product can be damaged by

ultraviolet radiation from the sun. When selecting a

location for the television, avoid locations where the

screen may be exposed to direct sunlight, such as in

front of a window.

• Never touch, press, or place anything on the LCD

screen. These actions will damage the LCD screen.

If you need to clean the LCD screen, follow the

instructions in item 35) on page 5.

Service

45)

WARNING:

RISK OF ELECTRIC SHOCK!

Never attempt to service the TV yourself. Opening

and removing the covers may expose you to

dangerous voltage or other hazards. Failure to

follow this WARNING may result in death or

serious injury. Refer all servicing not specied in

this manual to a Toshiba Authorized Service

Provider.

46)

If you have the TV serviced:

• Ask the service technician to use only replacement

parts specied by the manufacturer.

• Upon completion of service, ask the service

technician to perform routine safety checks to

determine that the TV is in safe operating condition.

Choosing a location for your LED TV

To Display your LED TV on the included Pedestal Stand:

Observe the following safety precautions:

1) Read and follow the pedestal assembly instructions

included with the pedestal.

CAUTION: Before beginning pedestal assembly,

carefully lay the front of the LCD Panel face down

on a at, cushioned surface such as a quilt or

blanket. Leave the bottom of the unit protruding

over the edge of the surface and assemble the

pedestal as described in this instruction document.

Note: Extreme care should always be used when

attaching the pedestal stand to avoid damage to

the LCD panel.

Place the TV on a sturdy, level surface that can

support the weight of the TV.

Be sure to secure the TV to a wall, pillar, surface, or

other immovable structure see item 26) on page 5 for

additional details.

To Display your LED TV using a Wall Bracket:

If you decide to wall mount your LED TV, always use a

wall bracket Listed by an independent laboratory (such

as UL, CSA, ETL) that is appropriate for the size

and weight of the TV:

1) CAUTION: Two people are required for installation.

Unplug and remove any cables and/or other

component connectors from the rear of the TV.

Remove the screws of the VESA Mounting Pattern

shown in the table below, if applicable.

CAUTION: Do not use the screws removed from

the back cover to attach the wall mount bracket to

the TV.

Always use the screws supplied or recommended by

the wall mount manufacturer.

Follow the instructions provided with your wall bracket.

Before proceeding, make sure the appropriate

bracket(s) are attached to the wall and the back of the

TV as described in the instructions provided with the

wall bracket.

After attaching the appropriate bracket(s) to the wall

and the back of the TV, remove the pedestal stand

from the TV, as described in this instruction document.

VESA Mounting Pattern

TV Size Hole Pattern (HxV) Screw Size

40” 200mm x 200mm M6

50” 400mm x 200mm M8

Removing the Pedestal Stand

Carefully lay the front of the unit face down on a at,

cushioned surface such as a quilt or blanket. Leave

the stand protruding over the edge of the surface.

Note: Extreme care should always be used when

removing the pedestal stand to avoid damage to

the LCD panel.

Remove the stand screws shown in the diagram

below.This will allow removal of the pedestal stand.

Once you have removed the screws holding the

pedestal stand in place, remove the pedestal stand

from the TV.

L3400U Series

(Sample Illustration)

CAUTION: Always place the TV on the oor or a

sturdy, level, stable surface that can support the

weight of the unit. To secure the TV, use a sturdy strap

from the hook(s) on the rear of the TV to a wall stud,

pillar, or other immovable structure. Make sure the

strap is tight, secure, and parallel to the oor.

FCC Declaration of Conformity

Compliance Statement (Part 15):

Toshiba 40L3400U and 50L3400U Television

models comply with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

The party responsible for compliance to these rules is:

Toshiba America Information Systems, Inc.

9740 Irvine Blvd., Irvine, CA 92618. Ph: 800-631-3811

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by removing and applying

power to the equipment, the user is encouraged to try

to correct the interference by one of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and

receiver.

•

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician

for help.

Caution: Changes or modications to this equipment

not expressly approved by Toshiba could void the

user’s authority to operate this equipment.

Wireless Radio

For product available in the USA/Canada market, only

channel 1-11 can be operated. Selection of other channels is

not possible. The device could automatically discontinue

transmission in case of absence of information to transmit,

or operational failure. Note that this is not intended to

prohibit transmission of control or signaling information or

the use of repetitive codes where required by the technology.

If this device is going to be operated in 5.15-5.25GHz

frequency range, then it is restricted to an indoor

environment only.

Important: Any changes or modications not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

this equipment.

This device and its antenna(s) must not be co-located

or operating in conjunction with any other antenna or

transmitter.

VESA Mounting Pattern

Hook Sturdy strap

(as short as possible)

Two stand screws

40” TV.

VESA Mounting Pattern

Hook Sturdy strap

(as short as possible)

Two stand screws

50” TV.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum

distance 20cm between the radiator & your body.

ENERGY STAR

® User Information

ENERGY STAR User Information Statement: the factory

default settings of this television meet ENERGY STAR®

requirements. Changing Picture Settings may increase

energy consumption, possibly beyond the limits required for

ENERGYSTARqualication.

To ensure your television is operating at optimal energy

efciency,select[Home]modeduringinitialactivation.To

returnto[Home]modesettings,selectthe[Installation]icon

fromthemenu,select[Store/HomeMode],thenselect

[Home].ThisplacestheTVin[Standard]mode.[Standard]

mode is recommended for normal home use.

ENERGY STAR®qualiedTV.Products

that earn the ENERGY STAR prevent

green house gas emissions by meeting

strict guidelines set by the U.S.

Environmental Protection Agency.

ENERGY STAR and the ENERGY STAR

mark are registered U.S. marks.

Important notes about your TV

The following symptoms are technical limitations of

LCD Display technology and are not an indication of

malfunction; therefore, Toshiba is not responsible for

perceived issues resulting from these symptoms.

An afterimage (ghost) may appear on the screen if a

xed, non-moving image appears for a long period of

time. The afterimage is not permanent and will

disappear in a short period of time.

The LCD panel contained in this TV is manufactured

using an extremely high level of precision technology;

however, there may be an occasional pixel (dot of

light) that does not operate properly (does not light,

remains constantly lit, etc.). This is a structural

property of LCD technology, is not a sign of

malfunction, and is not covered under your warranty.

Such pixels are not visible when the picture is viewed

from a normal viewing distance.

Note: Interactive video games that involve shooting a

“gun” type of joystick at an on-screen target may not

work with this TV.

Trademark Information

• ClearScan, ColorMaster, ColorStream, CQ Engine,

DynaLight, GameTimer, Native Mode, Stable Sound,

Surock, TheaterWide, and TosLink are trademarks or

registered trademarks of Toshiba America Information

Systems, Inc. and/or Toshiba Corporation.

• Blu-ray Disc™, Blu-ray™, and the logos are

trademarks of the Blu-ray Disc Association.

• For DTS patents, see http://patents.dts.

com. Manufactured under license from

DTS Licensing Limited. DTS, the Symbol,

& DTS and the Symbol together are

registered trademarks, and DTS

TruSurround is a trademark of DTS, Inc. ©

• Manufactured under license from Dolby ®

Laboratories. Dolby ® and the double-D

symbol are trademarks of Dolby ®

Laboratories.

• DivX®, DivX Certied ® and associated logos

are trademarks of Rovi Corporation or its

subsidiaries and are used under license.

• GameNow is a trademark of Ubitus Inc.

• The terms HDMI and HDMI High-Denition

Multimedia Interface, and the HDMI Logo

are trademarks or registered trademarks of

HDMI Licensing LLC in the United States

and other countries.

• MPEG Layer-3 audio coding technology

licensed from Fraunhofer IIS and Thomson.

• Netix is a registered trademark of Netix,

Inc.

• Pandora is a registered trademark of

Pandora Media, Inc.

• Samba and Samba TV are trademarks of

Free Stream Media Corp.

• WiFi is a registered trademark of Wi-Fi

Alliance®.

• YouTube is a trademark of Google Inc.

• This production contains Bitstream Vera

Sans fonts under the following copyright:

Rights Reserved. Bitstream Vera is a

trademark of Bitstream, Inc.

• All other brand and product names are

trademarks or registered trademarks of

their respective companies.

rights reserved. Under the copyright laws, this guide cannot

be reproduced in any form without the prior written

permission of Toshiba. No patent liability is assumed,

however, with respect to the use of the information

contained herein.

Notice

The information contained in this manual, including but not

limitedtoanyproductspecications,issubjecttochange

without notice.

TOSHIBA AMERICA INFORMATION SYSTEMS,

INC., TOSHIBA OF CANADA LIMITED, AND

TOSHIBA DE MEXICO, S.A. DE C.V..

(COLLECTIVELY TOSHIBA) PROVIDES NO

WARRANTY WITH REGARD TO THIS MANUAL OR

ANY OTHER INFORMATION CONTAINED HEREIN

AND HEREBY EXPRESSLY DISCLAIMS ANY

IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE

WITH REGARD TO ANY OF THE FOREGOING.

TOSHIBA ASSUMES NO LIABILITY FOR ANY

DAMAGES INCURRED DIRECTLY OR

INDIRECTLY FROM ANY TECHNICAL OR

TYPOGRAPHICAL ERRORS OR OMISSIONS

CONTAINED HEREIN OR FOR DISCREPANCIES

BETWEEN THE PRODUCT AND THE MANUAL. IN

NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY

INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR

EXEMPLARY DAMAGES, WHETHER BASED ON

TORT, CONTRACT OR OTHERWISE, ARISING

OUT OF OR IN CONNECTION WITH THIS

MANUAL OR ANY OTHER INFORMATION

CONTAINED HEREIN OR THE USE THEREOF.

Contents

Chapter 1: Introduction ............................................................. 17

Features ..................................................................18

Overview of installation, setup, and use ...................20

TV front and side panel controls and connections ....21

TV back panel connections ......................................22

Chapter 2: Connecting Your TV ................................................. 24

Overview of cable types ...........................................24

Coaxial (F-type) cable .......................................24

Standard A/V cables (red/white/yellow) .............25

Component video cables (red/green/blue) .........25

HDMI

® cable (with HDMI Logo) .........................25

Optical audio cable ............................................26

LAN cable ..........................................................26

About the connection illustrations .....................26

Connecting a VCR, antenna, cable TV, or camcorder 26

Connecting a Blu-ray

™

/ DVD player, satellite

receiver with ColorStream

™

or VCR ...................28

Connecting an HDMI

® or DVI device to the

HDMI

® input ......................................................29

Contents

HDMI

® CEC connection ...........................................31

Connecting a digital audio system ...........................33

Connecting a computer ...........................................34

Connection to the TV’s HDMI

® terminal .............34

Connecting to a home network ................................35

Connecting the TV directly to a computer

without an Internet connection ....................35

Connecting the TV to a home network

without an Internet connection ....................36

Connecting the TV to a home network

with an Internet connection - wired ..............37

Connecting the TV to a home network

with an Internet connection - wireless .........38

Chapter 3: Using the Remote Control ....................................... 39

Installing batteries ...................................................39

Remote control effective range ................................40

Learning about the remote control ...........................41

Chapter 4: Menu Layout and Navigation .................................. 44

Main menu layout ....................................................44

Navigating the menu system ...................................46

Chapter 5: Setting up your TV ................................................... 47

Initial Setup .............................................................47

Installation setup selection ......................................48

Storing channels in memory (optional) ...................49

Auto Tuning .............................................................49

Manual Tuning .........................................................51

Setting channel skip ................................................51

Setting the AV input mode .......................................52

Setting the time zone ...............................................52

Viewing the system status .......................................53

Resetting Factory Defaults .................................53

Contents

Chapter 6: Setting up your TV ................................................... 54

Selecting the video input source ..............................54

Labeling the video input sources .............................56

Tuning to the next programmed channel ............58

Tuning to a specic channel (programmed

or unprogrammed) ......................................58

Switching between two channels using

Channel Return ...........................................58

Switching between two channels using

SurfLock™ ..................................................59

Selecting the picture size .........................................60

Full ....................................................................61

TheaterWide 1 ...................................................61

TheaterWide 2 ...................................................61

TheaterWide 3 ...................................................62

Native ...............................................................62

4:3.....................................................................63

Normal ..............................................................63

Dot by Dot .........................................................63

Scrolling the TheaterWide

picture

(TheaterWide 2 and 3 only) ...............................64

Using the Auto Aspect feature .................................65

Using the 4:3 Stretch ...............................................65

Adjusting the picture ..............................................66

Selecting the picture mode ................................66

Adjusting the picture quality ..............................67

Using closed captions .............................................68

Base closed captions .........................................68

Digital CC settings .............................................69

Adjusting the audio .................................................71

Muting the sound ..............................................71

Using the Digital Audio Selection .......................71

Selecting stereo/SAP broadcasts .......................72

Adjusting the audio quality ................................73

DTS TruSurround™ ...........................................73

Contents

Sound Mode ......................................................73

Stable Sound™ ..................................................73

Using the Dolby

® Digital Dynamic Range

Control feature ...........................................74

Selecting the PIN code ............................................74

Enter a new PIN code .........................................74

Forgotten PIN code ...........................................74

Changing or deleting your PIN code ..................75

Using parental controls (for USA region) .................75

Blocking TV programs and movies by

rating (V-Chip) ............................................75

Downloading an additional rating system ..........76

Displaying ratings .............................................79

Unlocking programs temporarily .......................79

Using the input lock feature .....................................80

Locking channels ....................................................80

Using the GameTimer

.....................................81

Using the panel lock feature ...............................82

MediaShare (Videos, Music, and Photos) ................83

Auto Start function ............................................85

To open the MediaShare ....................................85

Viewing photo les ............................................86

Playing music les ............................................88

Viewing photo les and playing music les

at the same time .........................................89

Playing video les .............................................89

During playback you can do the following: ...............90

To set the repeat mode: ...........................................90

DivX

® ......................................................................91

To register your TV to a DivX

® account: .............91

To unregister your device: .................................91

To playback DivX HD content: ............................92

Setting the sleep timer .............................................92

No Signal Power Down ............................................93

Using HDMI

® CEC ...................................................93

Contents

HDMI

® CEC playback device (Blu-ray

/DVD

player, etc.) control .....................................94

Other HDMI

® CEC functions ..............................96

Setting up HDMI

® CEC .......................................96

Using the HDMI

® settings feature ............................97

HDMI

® 1(2, or 3) RGB Range ............................97

HDMI

® Information Display ...............................97

Displaying TV status information .............................98

Understanding the last mode memory feature .........99

Chapter 7: Using the TV’s Advanced Features .......................100

Using the advanced picture settings ......................100

ColorMaster™ .................................................100

Base Color Adjustment ....................................100

Color Temperature ...........................................101

Static Gamma ..................................................101

DynaLight™ .....................................................102

Dynamic Contrast ............................................102

Cinema Mode ..................................................102

Noise Reduction ..............................................102

Using your home network .....................................104

When using a Wireless network connection ..........105

Wireless LAN and your Health: ........................105

Using the TV in a wireless LAN environment: ...105

Setting up the Network ..........................................106

Wireless Setup ................................................106

Easy Setup using PBC (Push button

conguration) ...........................................107

Easy Setup using PIN (Personal

Identication Number) ..............................107

Advanced Network Setup ................................111

Network Connection Test .................................113

Using the software keyboard .................................114

Enter text using the software keyboard ............115

Performing a Software Upgrade ............................116

Contents

Viewing the Software Licenses ..............................116

Using the TV Application Services features .....117

Watching movies with Netix

® ........................118

YouTube

.......................................................119

Pandora® .........................................................119

Samba TV

.....................................................120

HOTLIST .........................................................120

Chapter 8: Troubleshooting .....................................................121

General troubleshooting ........................................121

Picture problems ...................................................122

Sound problems ....................................................123

Remote control problems ......................................124

Channel tuning problems ......................................124

Closed caption problems .......................................125

Rating blocking (V-Chip) problems .......................125

No HDMI

® CEC operation ......................................125

HDMI

® problems ...................................................125

Network problems .................................................126

Wireless network problems ...................................128

MediaShare problems ...........................................128

If the problem persists after trying the solutions ....129

Appendix A: Specications .....................................................130

Television system ..................................................130

Channel coverage ..................................................130

Power source ........................................................131

Power maximum current .................................131

Power consumption ........................................131

Audio power ....................................................131

Speaker type .........................................................131

Video/audio terminals ...........................................131

Video/audio input ............................................131

ColorStream

(component video) HD input ....131

HDMI

®input .....................................................132

Digital audio output ...............................................132

Contents

Wireless connection ..............................................132

Ethernet ................................................................132

USB .......................................................................132

Dimensions (with stand) .......................................132

Weight (mass) .................................................133

Operating conditions .......................................133

Supplied accessories.............................................133

Acceptable signal formats for HDMI

® ....................134

HDMI

® signal formats ......................................134

Appendix B: License Agreement ............................................. 135

Appendix C: Index .................................................................... 139

Chapter 1

Introduction

Safety icons

This manual contains safety instructions that must be observed to avoid potential

hazards that could result in personal injuries, damage to your equipment, or loss

ofdata.Thesesafetycautionshavebeenclassiedaccordingtotheseriousnessof

the risk, and icons highlight these instructions as follows:

Indicates an imminently hazardous situation which, if not avoided, will result

in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result

in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result

in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result

in property damage.

Provides important information.

Introduction

Features

The following are just a few of the many exciting features of your

new Toshiba wide screen, integrated HD LED TV:

v Integrated digital tuning (8VSB ATSC and QAM) —

Eliminates the need for a separate digital converter set-top box

(in most cases)

v 1920 x 1080 output resolution

v Three HDMI ®—Digital,High-DenitionMultimedia

Interfaces with 1080p input support. See “Edge Enhancer” on

page 103.

v Built-in WLAN—Allows the television to access your home

wireless network.

v ColorStream TM HD—High-resolution component video input

and shared composite video input, see “DynaLightTM” on page 102.

v Digital Audio Out—Optical audio connection with Dolby ®

Digital optical output form. See “Using the advanced picture

settings” on page 100.

v DTS TruSurround TM—Delivers high quality surround and

expandedsoundeldovertwospeakers.

v Game Mode—Reduces controller delay for faster video

gaming action. See “Selecting the picture mode” on page 66.

v Dynamic Picture Mode—Delivers maximum contrast, clarity,

and color saturation. See “Selecting the picture mode” on page

66.

v GameTimer TM —Allows you to set time limits for video games

play and locks the input source for gaming modules when the

pre-set time expires. See “Using the GameTimerTM” on page 81.

v HDMI ® CEC control—Allows control of external devices

from the TV remote via HDMI® connection, see “DNR

(Dynamic Noise Reduction)” on page 103.

v ColorMaster TM—Allows you to adjust the TV’s standard

colors, see “ColorMaster™” on page 100.

v CQ Engine TM—Is a powerful advanced Dual Core processor

that creates enhanced picture quality, and enables superior

Smart TV capability.

v Cinema Mode—This picture quality feature provides a

smoother motion and a crisper image. See “Cinema Mode” on

page 102.

Introduction

Features

v ClearScan TM 120Hz Technology—Utilizes frame

interpolation technology to double the television refresh rate

for clear fast motion video. This technology is ideal for

watching action movies, sports and video games.

v DynaLight TM—Backlight control monitors the brightness of

each video frame and automatically adjusts backlight intensity

based on the content to create higher dynamic contrast, for

deeper blacks and increased depth, see “DynaLightTM” on

page 102.

v DNR—Digital picture Noise Reduction, see “DNR (Dynamic

Noise Reduction)” on page 103.

v Edge Enhancer—Enhancedvideoprocessingthatdenesthe

edges and textures for greater image details to make the picture

look crisp and clear, see “Edge Enhancer” on page 103.

v HDMI ® CEC—Allows control of external devices from the

TV remote via HDMI® connection, see “DNR (Dynamic Noise

Reduction)” on page 103.

v MediaShare—Allowsyoutoviewphotolesandplaymusic

les,see“MediaShare (Videos, Music, and Photos)” on page 83.

v Smart TV—Connects you to online content and your home

network.YoucanaccesskeymediaappsincludingNetix

®,

Pandora®, and YouTubeTM, see “Using the TV Application

Services features” on page 117.

v ENERGY STAR ® qualied

Introduction

Overview of installation, setup, and use

Follow these steps to set up your TV and begin using its many

exciting features.

1 Carefully read the important safety, installation, care, and

service information. Keep this document for future reference.

2 To choose a location for the TV:

v Read “Important notes about your TV” on page 8.

v PlacetheTVontheoororasturdy,level,stablesurface

that can support the weight of the unit. Secure the TV to a

wall, pillar, or other immovable structure, see 26) on page

v PlacetheTVinalocationwherelightdoesnotreecton

the screen.

v Always leave a space of at least 4 (four) inches around the

TV. The slots and openings are provided to protect the TV

from overheating and to help maintain reliable operation

of the TV.

3 Do not plug in any power cords until after you have connected

all cables and devices to your TV.

4 Before connecting cables or devices to the TV, learn the

functions of the TV’s connections and controls, see “Advanced

Network Setup” on page 111.

5 Connect your other electronic device(s) to the TV, see “DNR

(Dynamic Noise Reduction)” on page 103.

6 Install the batteries in the remote control, see “Installing

batteries” on page 39.

7 See “Using the Remote Control” on page 39 for an overview of

the buttons on the remote control.

8 After connecting all cables and devices, plug in the power

cords for your TV and other devices. Then press the POWER

button on the TV control panel or remote control to turn on the

TV.

If the TV stops responding to the buttons on the remote control or TV

control panel and you cannot turn the TV off or on, unplug the power

cords for a few seconds and then plug them in and try again.

9 See “Navigating the menu system” on page 46 for a quick

overview of navigating the TV’s menu system.

10 Program channels into the TV’s channel memory, see “Auto

Tuning” on page 49.

Introduction

11 For details on using the TV’s features, see Chapter 6 and

Chapter 7.

12 For help, refer to “Troubleshooting” on page 121.

13 Fortechnicalspecications,see“Specications”onpage130.

14 For the End User License Agreement, see “License Agreement”

on page 135.

TV front and side panel controls and connections

(Sample Illustration) 40/50L3400U - Front and side panel controls and

connection

1 Power On/Standby LED—Power indicator light, (glows red

when the TV power is Off).

2 Remote sensor (embedded)—Point the remote control toward

this remote sensor.

3 USB port—Usedtoaccessvideo,music,orphotoleswith

USB device.

4 POWER—Turns the TV On/Off.

5 / /+/ ─ —Adjusts the volume level, changes the channel, or

changes the input or source you are viewing, depending on the

mode, which is selected by the CH/INPUT button.

6 CH/INPUT—Switches the function of the buttons to / /+/─

select the volume, channel, or input mode.

•InVolumemode,thebuttonsincreaseordecreasethevolume.

•InChannelmode,thebuttonschangethechannelupordown.

•InSourcemode,thebuttonstoggletheinputfromonesource

to the next.

2 1

Left side panel TV front

TV top

TV front and side panel controls and connections

Introduction

TV back panel connections

For explanations of cable types and connections, see page 102.

(Sample Illustration) 40/50L3400U - Back panel connections

1 ANT/CABLE—Antenna input that supports analog (NTSC)

and digital (ATSC) off-air antenna signals and analog and

digital cable TV (QAM) signals.

2 ColorStream TM HD/ Video IN—High-resolution component

video input and shared composite video input, see

“DynaLightTM” on page 102.

3 HDMI ® IN—High-DenitionMultimediaInterfaceinput

receives digital audio and uncompressed digital video from an

HDMI® device or uncompressed digital video from a DVI

device. HDMI® connection is necessary to receive 1080p

signals.

4 Digital Audio out— Optical audio output in Dolby ® Digital or

PCM (pulse-code modulation) format for connecting an

external Dolby®Digitaldecoder,amplier,orhometheater

system with optical audio input.

5 LAN IN—Connects the TV to your home network.

6 Two HDMI ® IN—High-DenitionMultimediaInterfaceinput

receives digital audio and uncompressed digital video from an

HDMI® device or uncompressed digital video from a DVI

device. HDMI® connection is necessary to receive 1080p

signals.

7 Power Cord— Plug one end of the power cord into the jack on

the back of the unit, and the other end into a live electrical

outlet.

Power Cord

Introduction

TV back panel connections

The included power cord is for use with this unit only. Do not use it

with other equipment.

If you are not going to use the unit for an extended period of time,

disconnect the power cord from the wall outlet. Whenever the power

cord is plugged into the wall outlet, it will draw some power, even

when the unit is off.

Component/Standard (composite) video cables carry only video

information; separate audio cables are required for a complete

connection.

Chapter 2

Connecting Your TV

Overview of cable types

Before purchasing cables, know the connector types your devices

require. You can purchase cables from most stores that sell audio/

video devices.

Coaxial (F-type) cable

(Sample Illustration) Coaxial cable

Coaxial (F-type) cable connects your antenna, cable TV service,

and/or cable converter box to the ANT/CABLE input on your TV.

Please tighten this connection by hand. Using tools may damage the

connection.

Connecting Your TV

Overview of cable types

Standard A/V cables (red/white/yellow)

(Sample Illustration) Standard AV cables

Standard A/V cables (composite video) usually come in sets of

three, and connect to video devices with analog audio and

composite video output. These cables (and the related inputs on

your TV) are typically color-coded according to use: yellow for

video, red for stereo right audio, and white for stereo left (or mono)

audio.

Component video cables (red/green/blue)

Component video cables come in sets of three and connect with

video devices with component video output. (ColorStream

TM is

Toshiba’s brand of component video). These cables are typically

color-coded red, green, and blue. Separate audio cables are required

for a complete connection.

Component video cables provide better picture quality than

composite video cables.

HDMI® cable (with HDMI Logo)

(Sample Illustration) HDMI® cable

HDMI® (High-DenitionMultimediaInterface)cableconnectsto

devices that have an HDMI® output. An HDMI® cable delivers

digital audio and video in its native format. Separate audio cables

are not required, see “Connecting an HDMI® or DVI device to the

HDMI® input” on page 29.

HDMI® cables provide the best audio and picture quality.

Connecting Your TV

Connecting a VCR, antenna, cable TV, or camcorder

Optical audio cable

(Sample Illustration) Optical audio cable

Optical audio cable connect receivers with Dolby

® Digital or PCM

(pulse-code modulation) optical audio input to the TV’s Digital Audio

Out terminal, see “Connecting a digital audio system” on page 30.

LAN cable

(Sample Illustration) LAN cable

Standard LAN cable connects the TV to your home network, see

“Connecting the TV to a home network with an Internet connection

- wired” on page 37.

Crossover LAN cable connects the TV directly to a computer, see

“Connecting the TV directly to a computer without an Internet

connection” on page 35.

About the connection illustrations

You can connect different types and brands of devices to your TV in

severaldifferentcongurations.Theconnectionillustrationsinthis

manual are representative of typical device connections only. The

input/output terminals on your devices may differ from those

illustratedherein.Fordetailsonconnectingandusingyourspecic

devices, refer to each device’s User’s Guide.

Connecting a VCR, antenna, cable TV, or camcorder

Camcorder TV back panel From cable TV From cable TV

or antenna Cable box

Stereo VCR

OUT

CH 3

CH 4

f rom

ANT

VIDEO AUDIO

OUT

t o

T V

L R

OUT

CH 3

CH 4

VIDEO AUDIO

OUT

(Sample Illustration) 40/50L3400U—Connecting to a VCR,

antenna, or cable TV, or camcorder

Connecting Your TV

Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream™ or VCR

Connecting a Blu-ray™

/ DVD player, satellite receiver with

ColorStream™

or VCR

IN fro m ANT

VIDEO AUDIO

OUT to T V

L R

OUT

CH 3

CH 4

S- VIDEO

OUT

VIDEO

OUT

AUDIO

OUT

COMPONENT VIDEO

Sat ellit e

From antenna

Stereo VCR

TV back panel

From

satellite dish

Satellite receiver, Blu-ray or DVD player

(Sample Illustration) 40/50L3400U—Connecting a Blu-ray™ /

DVD player or Satellite receiver with Colorstream TM

(or VCR).

ColorStream

and composite video cables cannot be connected

simultaneously.

Items needed:

Coaxial cables

Standard AV cables

If you have a mono VCR, connect L/MONO on the TV to your

VCR’s audio out terminal using the white audio cable only.

Standard audio cables

Component video cables

You can connect the component video cables (plus audio

cables) from the DVD player or satellite receiver to the

COLOR STREAM HD terminal in the TV. The COLOR

STREAM HD terminal can be used to display Progressive

(480p, 720p) and Interlaced (480i, 1080i) scan systems.

Please note that 1080p is not supported. Check the User’s

Guide of the DVD player in order to determine the best

output signal available.

If your DVD player or satellite receiver does not have

component video, connect a standard A/V cable to the

AUDIO/VIDEO terminal. If your DVD player has HDMI®

video, see “Connecting an HDMI® or DVI device to the

HDMI® input” on page 29.

Connecting Your TV

Connecting an HDMI® or DVI device to the HDMI® input

When you use ColorStreamTM HD or Video, switch AV input mode

appropriately.

To view antenna or Cable channels:

Select the ANT/CABLE video input source on the TV.*

To view the DVD player:

Turn on the DVD player. Select the COLORSTREAM HD video

input source on the TV.*

To view satellite programs using the component video

connections:

Turn on the satellite receiver. Select the COLORSTREAM HD

video input source on the TV.*

To view the VCR or view and record antenna channels:

Turn on the VCR. Tune the VCR to the channel you want to watch.

Select the VIDEO input source on the TV.*

To record a TV program while watching a DVD:

Turn on the VCR. Tune the VCR to the channel to record. Select the

COLORSTREAM HD video input source on the TV* to view the

DVD.

*To select the video input source, press the INPUT button on the

remote control, see “Selecting the video input source” on page 54.

The unauthorized recording, use, distribution, or revision of television

programs, videotapes, DVDs, and other materials is prohibited under the

you to civil and criminal liability.

Connecting an HDMI® or DVI device to the HDMI® input

The HDMI® input on your TV receives digital audio and

uncompressed digital video from an HDMI

® source device, or

uncompressed digital video from a DVI (Digital Visual Interface)

source device.

This input is designed to accept HDCP (High- Bandwidth Digital-

Content Protection) program material in digital form from EIA/

CEA-861-D– compliant[1] consumer electronic devices (such as a

set-top box or DVD player with HDMI® or DVI output).

The HDMI® input can accept and display various signal formats.

Fordetailedsignalspecications,see“HDMI

® signal formats” on

page 134. Supported Audio format: Linear PCM, sampling rate

32/44.1/48 kHz.

Connecting Your TV

Connecting an HDMI® or DVI device to the HDMI® input

To connect a computer to the HDMI® input, see “Connection to the TV’s

HDMI® terminal” on page 34.

To connect an HDMI® device, you will need one HDMI® cable

(type A connector) per HDMI® device.

For proper operation, it is recommended that you use an

HDMI® cable with the HDMI® Logo( ).

HDMI® cables transfer both video and audio. Separate analog

audio cables are not required (see illustration).

TV back panel

HDMI device

(Sample Illustration) 40/50L3400U—HDMI® connections

To view the HDMI® device video:

Select HDMI 1 HDMI 2, or HDMI 3 video input source on the TV.

(Press the INPUT button on the remote control. For more

information, see “Selecting the video input source” on page 54).

To connect a DVI device, you will need:

HDMI® to DVI adapter cable

For proper operation, the length of an HDMI® to DVI adapter

cable should not exceed 9.8 ft (3m). The recommended length

is 6.6 ft (2m).

Connecting Your TV

HDMI® CEC connection

TV back panel

VIDEO AUDIO

L R

OUT

DVI /HDCP

OUT

(Sample Illustration) 40/50L3400U—DVI connections

To ensure that the HDMI® or DVI device is reset properly:

When turning on your electronic components, turn on the TV ﬁrst,

and then the HDMI®

or DVI device.

When turning off your electronic components, turn off the HDMI® or

DVI device ﬁrst, and then the TV.

EIA/CEA-861-D compliance covers the transmission of

uncompressed digital video with high-bandwidth digital content

protection, which is being standardized for reception of high-

deﬁnition video signals. Because this is an evolving technology, it is

possible that some devices may not operate properly with the TV.

HDMI® CEC connection

You can control the basic functions of connected audio/video

devices using the TV’s remote control if you connect a HDMI

® CEC

compatible audio receiver or playback device. The HDMI

® CEC

Control feature uses CEC technology as regulated by the HDMI

standard.

Connecting Your TV

HDMI® CEC connection

Back panel

Audio Receiver

Playback device (HDMI

CEC DVD Player, etc.)

Playback device (HDMI

CEC DVD Player, etc.)

(Sample Illustration) 40/50L3400U—HDMI

® CEC compatible

audio receiver and playback device connections

To connect an HDMI® device, you will need one HDMI® cable

(type A connector) per HDMI

® device (see “Overview of cable

types” on page 24).

If several devices are connected, HDMI®

CEC Control feature

may not operate properly.

For proper operation, it is recommended that you use an HDMI®

cable with the HDMI® Logo ( ).

Before controlling the device(s):

Aftercompletingtheaboveconnections,conguretheHDMI

CEC Setup menu with the desired settings, see “Setting up

HDMI® CEC” on page 96.

Theconnecteddevicesmustalsobecongured.Fordetails,see

the operation manual for each device.

This feature uses the CEC technology as regulated by the

HDMI® standard.

This feature is limited to models incorporating Toshiba’s

HDMI® CEC. However, Toshiba is not liable for those

operations. Refer to the individual instruction manuals for

compatibility information.

This feature may not work properly depending on the devices that are

connected.

Connecting Your TV

Connecting a computer

To control the audio:

1 Turn on the TV and the digital audio device.

2 Press the MENU button on the remote control and open the

Sound menu.

3 Select Sound > Digital Audio Output > Audio Format and

then press the OK button.

4 Pressthe▲/▼(arrow)buttonstoselecteitherAuto or PCM,

depending on your device.

Connecting a computer

With HDMI® connection, you can view your computer’s display on

the TV and hear the sound from the TV’s speakers.

Connection to the TV’s HDMI ® terminal

When connecting a computer with a DVI terminal, use an HDMI

®-

to-DVI adapter cable.

When connecting a computer with an HDMI

® terminal, use an

HDMI® cable (type A connector). Separate analog audio cables may

not be necessary, depending on computer hardware and setup, see

“Connecting an HDMI® or DVI device to the HDMI® input” on

page 29.

TV back panel

Computer

(Sample Illustration) 40/50L3400U Series - Connecting a computer

to the TV through the HDMI® terminal.

Connecting Your TV

Connecting to a home network

The edges of the picture may be hidden.

If receiving a 480i (HDMI®), 480p (HDMI®), 720p, 1080i, or 1080p

signal program, Native ModeTM scales the video to display the entire

picture within the borders of the screen (i.e. no overscan).

Connecting to a home network

The LAN port allows your Toshiba TV to connect to your home

network.

You can use this home network to access photos, movies, and music

lesthatarestoredonaconnectedMediaServerandplaythemon

your TV.

Connecting the TV directly to a computer without an Internet

connection

You will need a Crossover LAN cable.

TV back panel

Computer

(Sample Illustration) 40/50L3400U Series - Connecting a computer

without Internet connection.

Connecting Your TV

Connecting to a home network

Connecting the TV to a home network with an Internet connection -

wired

Items needed:

Coaxial or telephone cable (depending on your modem type)

Standard LAN cables

Router with Hub

Modem (DSL or cable)

Cable or

Phone jack

2, 3

Computer

Modem (DSL or cable) Router with a hub

TV back panel

(Sample Illustration) 40/50L3400U Series - Connecting with

Internet connection - wired

Item: Description:

1Coaxial or telephone cable (depending on your modem

type)

2 Standard LAN cable

3Do NOT connect a phone jack directly to the TV’s LAN

port.

Connecting Your TV

Connecting to a home network

Connecting the TV to a home network with an Internet connection -

wireless

Items needed:

Coaxial or telephone cable (depending on your modem type)

Standard LAN cables

Wireless LAN access point or wireless router

Modem (DSL or cable)

Cable or

Phone jack

Built-in WLAN system:

It is not nessesary to connect an

external WLAN adaptor to the TV

Computer

Modem (DSL or cable) Wireless LAN access point

(Sample Illustration) 40/50L3400U Series - Connecting with

Internet connection - wireless

Item: Description:

1Coaxial or telephone cable (depending on your modem

type)

2 Standard LAN cable

The transmission speed over the wireless LAN and the distance over

which wireless LAN can reach may vary depending on surrounding

electromagnetic environment, obstacles, access point design and

conguration,andclientdesignandsoftware/hardware

congurations.

The actual transmission speed will be lower than the theoretical

maximum speed.

The Built-in WLAN Adapter is based on the IEEE 802.11n speciﬁcation

and may not be fully compatible with, or support some features (e.g.,

security) of certain Wi-Fi equipment that are based on the draft version of

IEEE 802.11n.

Chapter 3

Using the Remote Control

Installing batteries

To install batteries :

1 Remove the battery cover from the back of the remote control.

Squeeze tab

and lift cover

(Sample Illustration) Removing the remote back cover

2 Insert two AAA batteries, corresponding to the (+) and (-)

markings on the battery compartment.

(Sample Illustration) Installing the batteries

3 Replace the battery cover.

Do not expose batteries to excessive heat such as sunshine, ﬁre, etc.

Using the Remote Control

Remote control effective range

Be sure to use AAA size batteries.

Dispose of batteries in a designated disposal area.

Always consider the environment when disposing of batteries.

Always follow applicable laws and regulations.

If the remote does not operate correctly, or if the operating range

is reduced, replace the batteries.

Always replace both batteries with new ones. Never mix battery

types or use new and used batteries together.

Always remove batteries from the remote if they are dead or if the

remote control is not to be used for an extended period of time.

This prevents battery acid from leaking into the battery compartment.

Remote control effective range

For optimum performance, aim the remote control directly at the

TV and make sure there is no obstruction between the remote

control and the TV.

16.4 ft (5m)

(Sample Illustration) 40/50L3400U-Remote control effective range

Using the Remote Control

Learning about the remote control

The buttons used for operating the TV are described below. For the

HDMI® CEC remote control functions, see “HDMI® CEC playback

device (Blu-rayTM/DVD player, etc.) control” on page 94.

1013

17 14

24 20

2327

(Sample Illustration) Remote control overview

The error message “NOT AVAILABLE” may appear if you press a

button for a function that is not available.

Using the Remote Control

Learning about the remote control

1 The POWER button turns the TV On/Off. When the TV is off,

the power LED indicator on the TV front glows red.

2 The PIC SIZE button cycles through the picture sizes, see

“Selecting the picture size” on page 60.

3 The PIC MODE button selects the picture mode, see

“Adjusting the picture” on page 66.

4 The INPUT button selects the video input source, see

“Selecting the video input source” on page 54.

5 The SLEEP button accesses the sleep timer, see “Setting the

sleep timer” on page 92.

6 The C. CAPTION button accesses closed captions, see “Using

closed captions” on page 68.

7 The Channel Number buttons ( , and 0-9 Dash 100) directly

tune channels. The (Dash 100) button allows you to enter two

part channel numbers, see “Storing channels in memory

(optional)” on page 49.

8 The CH RTN button returns to the last viewed channel or

source, see “Switching between two channels using Channel

Return” on page 58.

9 The MUTE button reduces or turns off the sound, see “Muting

the sound” on page 71.

10 The CH▲/▼(arrow) buttons cycle through programmed

channels (when no on-screen menu is present), see “Storing

channels in memory (optional)” on page 49.

11 The HOME button launches the applications bar.

12 The NETFLIXbuttonlaunchestheNetix® application on-

screen.

13 The VOL (+ –) buttons adjust the volume level.

14 The INFO button displays TV status information as well as

program details, when available, see “Displaying TV status

information” on page 98.

15 The EXIT button closes on-screen menus.

16 The OK button activates highlighted items in the main

menu system.

17 The MENU button accesses the main TV menu system. See

“Navigating the menu system” on page 46.

18 The Arrow buttons (▲ ▼ ◄ ►)selectoradjustprogramming/ / /

menus when a menu is on-screen.

Using the Remote Control

Learning about the remote control

19 The BACK button returns to the previous screen.

The following key functions allow you to control Toshiba

HDMI® CEC compatible devices via HDMI® connection. See

“Using HDMI® CEC” on page 93.

20 The STOP button stops playback of the loaded playback

device.

21 The PLAY button begins playback of the loaded playback

device.

22 The SKIP forward button skips forward to locate later DVD

chapters.

23 The FF button fast-forwards the playback device. (Press during

play mode to view the picture moving rapidly forward.)

24 The EJECT button ejects the DVD or tape.

25 The PAUSE/STEP button suspends play or record temporarily.

Press during play or record mode to pause the picture; press

again to restart.

26 The SKIP reverse button skips to the beginning of the current

DVD chapter or locates the previous chapter.

27 The REW button rewinds/reverses the playback device. (Press

during play mode to view the picture moving rapidly

backward).

Chapter 4

Menu Layout and Navigation

Main menu layout

The tables below and on the next pages provide a quick overview of

your TV’s menu system. To open the menus (illustrated below),

press MENU on the remote control.

Icon Item Option

Picture Picture Mode

Dynamic / Standard / Movie / Game / PC /

Store

NOTE Store Mode is only available if the TV is set to

Store Mode at initial setup. This option is hidden in the

Home Mode.

NOTE When the TV is set to Store in the initial menu or

Store in the Installation Menu, the set will always reset to

Store Picture Mode.

Reset Reverts to the factory defaults for the selected

picture mode

Backlight Adjusts Backlight

Contrast Adjusts Contrast

Brightness Adjusts Brightness

Color Adjusts Color

Tint Adjusts Tint

Sharpness Adjusts Sharpness

Advanced Picture Settings Opens the Advanced Picture Settings menu

Display Settings Opens the Display Settings menu

Menu Layout and Navigation

Icon Item Option

Sound Balance Adjusts Balance

Bass Adjusts Bass

Treble Adjusts Treble

DTS TruSurround On / Off

Sound Mode Standard/Music/Movie/Clear Voice

Stable Sound On / Off

Dynamic Range Control On / Off

TV Speakers On/Off

MTS Stereo / Mono / SAP

Digital Audio Selection Offers different audio choices for digital channels

Primary Audio Language Primary audio choice for digital channels

Digital Audio Output Opens the Digital Audio Output menu

Options Channel Options Opens Channel Options menu

Closed Captions Opens Closed Captions menu

MediaShare Setup Opens MediaShare Setup menu

HDMI CEC Control

Setup

Opens HDMI CEC Control Setup menu

HDMI CEC Player

Control

Opens HDMI CEC Player Control menu

Input Options Opens Input Options menu

Power Management Opens Power Management menu

Panel Lock On / Off

HDMI Information Display On / Off

Parental PIN Setup Opens Parental PIN Setup menu

Parental Control and Locks Opens Parental Control and Locks menu

Installation Menu Language English / Français / Español

Time Zone Eastern / Newfoundland / Atlantic / Hawaii /

Alaska / Paciﬁc / Mountain / Central

Daylight Saving Time On / Off

Store / Home Mode Home / Store

Channel Tuning Opens Channel Tuning menu

Quick Setup Executes Quick Setup

Reset TV Resets to Factory Defaults

Network Network Setup Opens Network Setup menu

Smart Apps Setup Opens Smart Apps Setup menu

Timers Sleep Timer 10-minute increments, from 0 min to a

maximum of 12 hours

Game Timer Off/30 min/60 min/90 min/120 min

Main menu layout

Chapter 5

Setting up your TV

Initial Setup

WhenyourstturnonorresettheTV,theInitialSetupwindowwill

appear.

1 In the Menu Languageeld,pressthe◄ ►(arrow)buttonsto/

select your preferred language.

2 Pressthe▲ ▼(arrow)buttonstoselect/ Time Zone.Then set

yourdesiredtimezone,usingthe◄ ►(arrow)buttonsand/

press the OK button.

The Store / Home Mode settings window appears.

3 Fornormalhomeuse,pressthe◄ ►(arrow)buttonstoselect/

Home, and then press the OK button.

The ANT/CABLE In setup window appears.

4 Pressthe◄ ►(arrow)buttonstoselecttheinputsource(/ Cable

or Antenna), and then press the OK button.

5 Press the OK button to select Start Scan and continue with the

Auto Tuning.

You must select a Language and either Home/Store mode, before

you can exit out of the Setup Menu. The EXIT button will not

function until these selections have been made.

Setting up your TV

Installation setup selection

Menu language

You can choose from three different menu language settings

(English, Français, and Español) for the on-screen display of menus

and messages.

To select the menu language:

1 Press the MENU button and open the Installation menu, then

highlight Menu Language.

2 Press the◄ ► ▲ ▼/ / / (arrow) buttons to select your preferred

language.

Network

Installation

Menu Language

Time Zone

Daylight Saving Time

Store / Home Mode

Channel Tuning

Quick Setup

Reset TV

English

Eastern

Off

Home

English

Français

Español

(Sample Image) Selecting the menu language

3 Press the EXIT button to close the Installation menu.

ANT/CABLE IN

ThissettingcongurestheinputsourcefortheANT/CABLE

terminal.

1 Press the MENU button and open the Installation menu.

2 Highlight Channel Tuning, and then press the OK button.

Network

(Sample Image) Installation - Setup selection

Setting up your TV

Auto Tuning

3 Open the Channel Tuning menu, highlight ANT/CABLE In,

and then press the OK button.

Network

(Sample Image) Channel tuning menu - Input conguration

selection

4 Press the ▲ ▼/(arrow) buttons to select the input source (Cable

or Antenna), and then press the OK button to save your new

settings.

Storing channels in memory (optional)

To make sure your TV stops only on the channels you want when

youpressthe▲ ▼/(arrow) buttons on the remote control or the

control panel, store those channels in the TV’s memory.

Auto Tuning

You can set up the TV to detect all active channels in your area and

store them in its memory. Then you can manually add or erase

individual channels from memory.

You must set up the ANT/CABLE input source before

programming channels. See “ANT/CABLE IN” on page 48.

The automatic channel programming process will erase

channels that were previously programmed into the TV’s

memory.

To tune the TV to a channel not programmed in the channel

memory, you must use the Channel Number buttons on the

remote control.

Programming channels when the ANT/CABLE input is

conﬁgured for Cable will take substantially longer than when the

antenna input is conﬁgured for Antenna. This is normal;

however, once channel programming is ﬁnished, you should not

have to repeat the programming process again unless your Cable

TV service lineup changes signiﬁcantly.

Storing channels in memory (optional)

Setting up your TV

To program channels automatically:

1 Conguretheantennainputsource,ifyouhavenotalready

done so, see “ANT/CABLE IN” on page 48.

2 Press the MENU button and open the Installation menu.

3 Highlight Channel Tuning, and then press the OK button.

Network

(Sample Image) Setup menu - Installation selection

4 Highlight Auto Tuning, and then press the OK button to open

the Channel Program menu to begin channel programming.

Cable

Scanning channels, please wait...

Number of Channels Found - 7

Scanning Analog Channels

Channel - 9

Cancel

(Sample Image) Installation menu - Channel selection

The TV will automatically cycle through all the antenna/cable

channels, and store all active channels in the channel memory.

While the TV is cycling through the channels, the message

“Scanning channels, please wait” appears.

When channel programming is complete, press the CH

▲/▼(arrow)buttonstoviewtheprogrammedchannels.

To cancel channel programming, press the EXIT button on the

remote control or highlight Cancel in the on-screen display, and

then press the OK button.

Auto Tuning

Setting up your TV

Setting the time zone

To add a channel to the channel memory:

Highlight the checked box next to the channel number you

wish to add, and then press the OK button to remove the check.

You can also block speciﬁc channels so that they cannot be tuned

until you unlock them. For information, see “Locking channels” on

page 80.

To manually add digital sub-channels on a physical channel:

Use the Channel Numbers and the (Dash 100) on the remote

control to enter the channel number (for example, 56–1).

If the channel is found, the number will be added to the list and

the box will be unchecked. If the channel is not found, a

message appears.

Skipped channels cannot be selected with the CH ▲ ▼/ (arrow)

buttons; however, they can be accessed using the number keys on the

remote control.

Setting the AV input mode

ThissettingdeterminesthecongurationofthesharedAVinputon

your TV. You can set this input for either ColorStream HD or

Video.

Add the following descriptions:

To set the AV Input mode:

From Options menu, highlight Input Options, and then press

the OK button.

Press▲

/▼(arrow)

buttons to select AV Input, and then press

the OK button.

Press▲

/▼(arrow)

buttons to select Video or ColorStream

HD, and then press the OK button to save your new setting.

Setting the time zone

The Time Zone setup allows you to specify the correct time zone for

your region. This feature allows the TV status information to

display the correct time zone information for your viewing area.

To set the time zone:

1 In the Installation menu, highlight Time Zone, and press the

OK button.

2 Press the▲ ▼/(arrow) buttons to select the region, and then

press the OK button.

Setting the AV input mode

Setting up your TV

Selecting the video input source

You can label the video input sources according to the speciﬁc

devices you have connected to the TV, see “Labeling the video input

sources” on page 56.

Sources can be “hidden,” see“Labeling the video input sources” on

page 56.

“NO VIDEO” will appear randomly on the screen if no signal is

received in video input mode.

If a CEC device is connected to an HDMI® input, the HDMI® CEC

icon appears.

If a HDMI® CEC device with HDMI® switching capability (e.g.

Audio Receiver) is connected to the HDMI

® input, press the INPUT

button on the remote control repeatedly to highlight HDMI 1 or

HDMI 2.

If the connected CEC device has any connected devices, a separate

device selection pop-up window appears:

Audio Receiver

Player

(Sample Illustration) HDMI® setting pop-up window

Press the INPUT button repeatedly to highlight the desired input

source, and then press the EXIT button.

When you select HDMI® CEC input sources from the pop-up

window using the INPUT button, some HDMI

® CEC devices

may automatically turn on.

When selecting input sources using the ▲ ▼/ / /+– (arrow) buttons,

you will need to press the OK button to actually select a particular

device from the pop-up window or wait 5 seconds after highlighting

desired input.

Setting up your TV

Labeling the video input sources

You can label each video input source according to the type of

device you have connected to each source. Choose from the

following preset list of labels:

– – (default label)

Receiver

Cable

DVD

Game

Recorder

Satellite

VCR

Blu-Ray

Hide (to hide an unused input in the Input Selection screen and

in the Channel Browser Inputs list)

To label the video input sources:

1 In Options menu, highlight Input Options and then press the

OK button.

2 Highlight Input Labeling, and then press the OK button.

3 Pressthe▲ ▼(arrow)buttonstohighlightthevideosource/

you wish to label.

4 Pressthe◄ ►(arrow)buttonstoselectthedesiredlabelfor/

that input source. If a particular input is not used, Hide can be

selected as the label. This will cause that input to be grayed out

in the Input Selection screen and skipped over when you press

the INPUT button on the remote control.

Input Labeling

Reset Done

Video / ColorStream HD

HDMI 1

HDMI 2

HDMI 3

(

Sample Image

) Input Labeling screen

5 To save the new input labels, highlight Done, and then press

the OK button.

To revert to the factory default labels, highlight Reset and press

the OK button.

Setting up your TV

Input labeling example:

The screen below left shows the default Input Selection screen

(withnoneoftheinputslabeledasaspecicdevice).Thescreen

below (right) is an example of how you can label the inputs if you

connected a VCR to ColorStreamTM HD, a video recorder to

HDMI 1, and a DVD player to HDMI 2.

VCR

Recorder

DVD

HDMI 3

ColorStream HD / Video

HDMI 1

HDMI 2

HDMI 3

No inputs labeled All inputs labeled

(

Sample Image)

Input selection screens

To clear the input labels:

1 In Options menu, highlight Input Options and then press the OK

button.

2 Highlight Input Labeling, and then press the OK button.

3 Highlight Reset, and then press the OK button.

Labeling the video input sources

Setting up your TV

Tuning to the next programmed channel

To tune to the next programmed channel, press the CH▲/▼

(arrow) buttons on the remote control or TV control panel.

This feature will not function until you have programmed channels into

the TV’s channel memory, see “Storing channels in memory (optional)”

on page 49.

Tuning to a speciﬁc channel (programmed or unprogrammed)

To tune analog channels:

Press the Channel Number (0–9) on the remote control. For

example, to select channel 125, press 1, 2, 5, and then press the

OK button.

Tuning digital channels:

Press the Channel Number (0–9) on the remote control, followed by

the (Dash 100) button, and then the sub-channel number. For

example, to select digital channel 125-1, press 1, 2, 5, –, 1, and then

press the OK button.

If a digital channel is not programmed, either through the automatic

channel scan or the Channel add function, see “Auto Tuning” on page 49,

you will have to tune the RF channel using the Channel Numbers and the

(Dash 100) button on the remote control.

Switching between two channels using Channel Return

The Channel Return feature allows you to switch between two

channels without entering an actual channel number each time.

1 Selecttherstchannelyouwanttoview.

2 Select a second channel using the Channel Number buttons

(and the (Dash 100) button if selecting a digital channel).

3 Press the CH RTN button on the remote control. The previous

channel will display. Each time you press the CH RTN button,

the TV will switch back and forth between the last two channels

that were tuned.

Tuning to the next programmed channel

Setting up your TV

If you press the CH RTN button from a non-antenna input, the TV will

return to the last-viewed input.

Switching between two channels using SurfLock™

The SurfLock™ feature temporarily “memorizes” one channel to

the CH RTN button, so you can return to that channel quickly from

any other channel by pressing the CH RTN button.

To memorize a channel to the CH RTN button:

1 Tune the TV to the channel you wish to program into the CH

RTN button.

2 Press and hold the CH RTN button for a few seconds until the

message “Memorized” appears on the screen. The channel has

been programmed to the CH RTN button.

3 You can then change channels repeatedly, and when you press

the CH RTN button, the memorized channel will be tuned.

The TV will return to the memorized channel one time only. Once

you press the CH RTN button and then change channels again, the

CH RTN memory will be cleared and the button will function as

Channel Return, by switching back and forth between the last two

channels that are tuned.This feature also works for external inputs.

Switching between two channels using SurfLock™

Setting up your TV

Selecting the picture size

You can view many program formats in several picture sizes—

Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3,

Normal, and Dot by Dot.

The picture size illustrations are examples only. The format of the image

(in any of the picture sizes) depends on the format of the signal you are

currently watching. Select the picture size that displays the current

program in the way that looks best to you.

You can save separate picture size preferences for each input on

your TV.

To select the picture size:

1 Press the PIC SIZE button on the remote.

2 With the Picture Size menu displayed, do one of the following:

Repeatedly press the PIC SIZE button.

Press the corresponding number button (0-5) while the

Picture Size menu is displayed.

Press the▲ ▼(arrow)/ buttons while the Picture Size

menu is displayed.

Some of the picture sizes may not be available depending on the

receiving signal format.

Using these functions to change the picture size (i.e., changing the

height/width ratio) for any purpose other than your private viewing may

be prohibited under the Copyright Laws of the United States and other

countries, and may subject you to civil and criminal liability.

If you select a TheaterWideTM picture size, the top and bottom edges of the

picture (including subtitles or captions) may be hidden. To view these

edges, adjust the Picture Position or try viewing the program in 4:3 or

Full, see “Scrolling the TheaterWideTM picture (TheaterWide 2 and 3

only)” on page 64.

Setting up your TV

Selecting the picture size

Full

The Full setting is for viewing in the 16:9 (480i, 480p) source

programs. If receiving a squeezed 4:3 format program, the picture is

stretchedhorizontallytollthewidthofthescreenbutnotstretched

vertically.

The Full setting is for viewing in 1080i, 1080p, and 720p program

source.

(Sample Illustration) Picture size - Full

The edges of the picture may be hidden.

TheaterWide 1

This setting is for viewing 4:3 format programs.

(Sample Illustration) Picture size - TheaterWide 1

The center of the picture remains close to its original proportion,

buttheleftandrightedgesarestretchedhorizontallytollthe

screen.

TheaterWide 2

This setting is for viewing letter box programs.

(Sample Illustration) Picture size - TheaterWide 2, letter box

The picture’s top and bottom edges may be hidden*.

Setting up your TV

Selecting the picture size

TheaterWide 3

This setting is for viewing letter box programs with subtitles.

(Sample Illustration) Picture size - TheaterWide 3, letter box with subtitles

The picture’s top and bottom edges are hidden*.

* To view the hidden areas (such as subtitles or captions), see

“Scrolling the TheaterWide

TM picture (TheaterWide 2 and 3 only)”

on page 64.

Native

These settings are for viewing in 480i (HDMI

®), 480p (HDMI®),

720p, 1080i, and 1080p signal programs).

This applies pixel-for-pixel image reproductions of Full HD content

and eliminates overscanning; you see all the original picture within

the screen and scaling artifacts are eliminated.

(

Sample Illustration) Picture size - Native

If receiving a 1080i, 1080p, 720p, 480i (HDMI

®), or 480p

(HDMI®) signal program, the video is scaled to display the

entire picture within the borders of the screen (i.e. no over-

scanning).

This is especially useful for external HD sources such as DVD

movies, Video Games, or computer graphics.

The Native mode is supported only for HDMI® (1080i, 1080p, 720p,

480i, and 480p), ColorStreamTM (1080i and 720p), and ANT/CABLE

(digital) inputs (1080i, 1080p, and 720p).

Depending on the input signal, the picture’s border may be hidden,

displayed in black, or noisy.

Setting up your TV

Selecting the picture size

4:3

(

Sample Illustration) Picture size - 4:3

Some program formats will display with sidebars and/or bars at the

top and bottom.

Normal

This setting is for viewing VGA, SVGA, XGA, WXGA, and

SXGA sources.

(

Sample Illustration) Picture size - Normal

This size is a non-stretched display. Some input signal formats will

display with sidebars and/or bars at the top and bottom.

Dot by Dot

This setting is for viewing VGA, SVGA, XGA, WXGA, and

SXGA sources.

(

Sample Illustration) Picture size - Dot by Dot

Dot by Dot is a non-scaling display. Depending on the input signal

format (VGA, for example) the picture may appear with sidebars

and/or bars at the top and bottom.

Setting up your TV

Scrolling the TheaterWideTM picture (TheaterWide 2 and 3

only)

You can set separate scroll settings for the TheaterWide 2 and

TheaterWide 3 modes for each input.

To set the scroll settings:

1 In the Picture Menu, highlight Display Settings, and then

press the OK button.

2 Highlight Picture Position, and then press the OK button.(The

Picture Position will be available when Picture Size is

TheaterWide 2 or TheaterWide 3.)

(

Sample Image) Picture menu - Theater Settings selection

3 The Picture Positionscreenwillappear,press◄ ►(arrow)/

button to scroll the picture up and down as needed.

4 To save the new settings, highlight Done, and then press the

OK button.

To revert to the factory defaults, highlight Reset and then press

the OK button.

The adjustment range is from -5 to +10.

When receiving a signal at 480i resolution, the picture scroll function

may have limited adjustment range.

Scrolling the TheaterWide

TM picture (TheaterWide 2 and 3 only)

Setting up your TV

Using the 4:3 Stretch

Using the Auto Aspect feature

When this feature is set to On, the TV will automatically select the

picture size when one of the following input sources is received:

A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE

input.

480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from

the HDMI® inputs.

Aspect Ratio of Signal

Source

Automatic Aspect Size (automatically selected when Auto

Aspect is On)

4:3 Normal 4:3

4:3 Letter Box TheaterWide 2

16:9 Full Full

Not deﬁned (no ID-1

data or HDMI® aspect

data)

The current picture size you selected, see “Selecting the

picture size” on page 60.

To turn on the auto aspect ratio feature:

1 Press the MENU button and open the Picture menu.

2 Highlight Display Settings, and then press the OK button.

3 In the Auto Aspecteld,presstheOK button, and then select

On.

To turn off the Auto Aspect ratio feature, Select Off in step 3 above.

Using the 4:3 Stretch

When 4:3 Stretch is activated, the TV displays 4:3 programs as a

full-screen picture.

1 From the Picture menu, highlight Display Settings, and then

press the OK button.

2 Pressthe▲/▼(arrow)buttonstoselect4:3Stretch,andthen

press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn or Off, and then

press the OK button

This feature is available when Auto Aspect is set to On.

Using the Auto Aspect feature

Setting up your TV

Adjusting the picture

Toshiba HDTVs provide a series of preset Picture Modes with

color,contrastandothersettingsspecicallytunedfordifferent

types of video content. These Picture Modes include Store,

Dynamic, Standard, Movie, Game, and PC. Your personal picture

quality adjustments will also be saved as preferences in each Picture

Mode for complete control of your viewing experience.

Selecting the picture mode

You can select your desired picture settings from the modes

described below.

Mode: Description:

Dynamic Maximizes contrast, color saturation, sharpness, gray scale, and

brightness to create more vivid and dynamic images.

Standard Standard picture settings.

Movie Optimizes the backlight, contrast, brightness, color saturation,

sharpness, color temperature, gray scale, noise reduction and motion

compensation to create the perfect picture settings for watching movies

in a dark room.

Game Game Mode reroutes the video signal to bypass select internal TV

circuitry and shorten signal-to-screen time for reduced controller delay

and faster video gaming action.

PC Fine tunes the video processing and optimizes sharpness, color

saturation, aspect ratio, color temperature and noise reduction to produce

the best picture settings when displaying video from a PC or a notebook.

Store Mode is only available if the TV is set to Store Mode at initial setup.

This option is hidden in the Home Mode.

When the TV is set to Store in the initial menu or Store in the

Installation Menu, the set will always reset to Store Picture Mode.

PC mode is available for HDMI® only (grayed out for other input

sources).

Setting up your TV

Adjusting the picture

To select the picture mode using the menu system:

1 Press the MENU button and open the Picture menu.

2 Highlight Picture Mode, and then press the OK button.

Network

(Sample Image) Picture menu - Mode selection

3 Press the ▲/▼(arrow)buttonstoselectthepicturemodeyou

prefer, and then press the OK button.

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight,

DynaLightTM, Brightness, Color, Tint, and Sharpness) to your

personal preferences.

Selection Press (◄) Press (►)

Backlight* darker lighter

Contrast lower higher

Brightness darker lighter

Color paler deeper

Tint reddish greenish

Sharpness softer sharper

* Backlight: adjusts the brightness of the entire screen. When in video mode

and no signal is input, this selection is automatically set to 0 (Settings are

stored in memory).

To adjust the picture quality:

1 Press the MENU button and open the Picture menu.

2 Pressthe▲/▼(arrow) buttons to select the picture quality you

wish to adjust ( Backlight, Contrast, Brightness, Color, Tint, or

Sharpness), press the OKbutton.Thenpressthe◄/►(arrow)

buttons to adjust the setting.

Adjusting the picture

Setting up your TV

Using closed captions

To reset to the factory defaults:

1 Press the Menu button.

2 Select Picture►Reset.

3 Press the OKbutton.Aconrmationscreenappears.

4 Select the Yes, and then press the OK button.

Any picture setting that you adjust aftects the current input only. You can

adjust the picture quality separately for each input.

Depending on a Sharpness value, the Edge Enhancer effect may be

reduced.

Using closed captions

Base closed captions

Closed caption mode has two options:

Captions—An onscreen display of the dialogue, narration and

sound effects of TV programs and videos that are closed

captioned (usually marked “CC” in program guides).

Text—An onscreen display of information not related to the

current program, such as weather or stock data (when provided

by individual stations).

To view captions or text:

1 In Options menu, highlight Closed Captions, and then press

the OK button.

2 In the Closed Caption Display eld,selectOn.

3 In the Analog CC Modeeld,selectthedesiredclosedcaption

mode, and then press the OK button.

To view captions, highlight CC1, CC2, CC3, or CC4.

(CC1 displays translation of the primary language in your area.)

(

Sample Illustration) Viewing captions

Setting up your TV

Using closed captions

If the program or video you selected is not closed captioned, no captions

will display onscreen.

To view text, highlight T1, T2, T3, or T4.

(

Sample Illustration) Captions - text

If text is not available in your area, a black rectangle may appear on

screen. If this happens, set the Base CC Mode to Off.

To turn off closed caption mode, select Off in step 2 above.

A closed caption signal may not display in the following situations:

When a recording has been dubbed

When the signal reception is weak

When the signal reception is non-standard

Digital CC settings

You can customize the closed caption display characteristics by

changing the background color, opacity, text size, type, edge, and

color.

These settings are available for digital channels only.

You cannot set Caption Text and Background as the same color.

To customize closed captions:

1 In Options menu, highlight Closed Captions, and then press the

OK button.

2 Highlight Digital CC Settings, and then press the OK button.

Setting up your TV

Using closed captions

3 Pressthe▲ ▼(arrow)buttonstohighlightthecharacteristic/

youwishtochange,andthenpressthe◄ ►(arrow)buttonsto/

select the format for that characteristic.

4 To save the new settings, highlight Done, and then press the

OK button.

To revert to the factory defaults, highlight Reset, and then press

the OK button.

Mode: Description

Caption Size Auto, Small, Standard, Large

Caption Text Type

Auto, Default, Mono (with Serif), Prop. (with Serif), Mono

(without Serif), Prop. (without Serif), Casual, Cursive, Small

Capitals

Caption Text Edge Auto, None, Raised, Depressed, Uniform, Left Drop Shadow,

Right Drop shadow

Caption Text Color Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

Text Foreground Opacity Auto, Transparent, Translucent, Flashing, Solid

Background Color Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

Magenta, Cyan

Text Background Opacity Auto, Transparent, Translucent, Flashing, Solid

Caption Text Edge Color Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

Using the Closed caption button

If you press the CC button when an analog channel is tuned or from

an external input (480i signal from the video input):

The CC bar will appear and will display the options, CC1-4,

T1-4.

If you press the CC button when a digital channel is tuned:

The CC bar will appear and will display the available caption

options for that channel or service.

Setting up your TV

Adjusting the audio

Muting the sound

Press the MUTE button to partially reduce (1/2 Mute) or turn off

(Mute) the sound. Each time you press the MUTE button, the mute

mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2

Mute, etc.

1/2 Mute Mute Volume

(

Sample Image) Levels of mute

If you modify items in the Sound menu while Mute is active, Mute is

cancelled.

Using the Digital Audio Selection

You can use the Digital Audio Selection to conveniently switch

between audio tracks on a digital channel (for those channels that

have multiple audio tracks). This temporarily overrides the audio

track chosen by the Primary Audio Language option under the

Sound menu, see “Selecting stereo/SAP broadcasts” on page 72.

1 Press the MENU button and open the Sound menu.

2 Highlight Digital Audio Selection, and then press the OK

button.

Network

DTS TruSurround

Sound Mode Standard

Stable Sound Off

Digital Audio Output

(Sample Image) Sound menu - Digital Audio Selector selection

3 Press the ◄ ►(arrow)buttonstoselectthedesiredservice./

4 Press the EXIT button.

Setting up your TV

Adjusting the audio

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to output

high-delitystereosound.MTSalsocantransmitasecondaudio

program (SAP) containing a second language, music or other audio

information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the icon Stereo or

SAP appears when the INFO button is pressed. The MTS feature is

only available for analog signals on the ANT/CABLE input.

To listen in stereo sound:

1 Press the MENU button and open the Sound menu.

2 Highlight MTS, and then press the OK button.

3 Select Stereo, and then press the OK button.

You can typically leave the TV in Stereo mode because it outputs the

type of sound being broadcast (stereo or monaural).

If the sound is noisy, select Mono to reduce the noise.

To listen to an alternate language on an ATSC digital station (if

available), highlight the Primary Audio Languageeldinstep2

above, and then select the language you prefer.

To listen to a second audio program on an analog station, if available,

select SAP in step 2 above.

A second audio program (SAP) can be heard only on those TV

stations that offer it. For example, a station might broadcast another

language as a second audio program. If you have SAP on, you will

see the current program on the screen but hear the other language

instead of the program’s normal audio.

If you have SAP on and the station you are watching is not

broadcasting a second audio program, the station’s normal audio will

be output. However, occasionally there is no sound at all in SAP

mode. If this happens, set the MTS feature to Stereo mode.

Setting up your TV

Adjusting the audio

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble and

balance.

To adjust the audio quality:

1 Press the MENU button and open the Sound menu.

2 Pressthe▲/▼(arrow)buttonstohighlighttheitemyouwishto

adjust (Bass, Treble, or Balance), and then press the OK button.

3 Pressthe◄ ►(arrow)buttonstoadjustthelevel./

◄makesthebassortrebleweakerorincreasesthebalance

in the left channel (depending on the item selected).

► makes the bass or treble stronger or increases the

balance in the right channel (depending on the item

selected).

DTS TruSurround™

This technology delivers high quality surround sound and expanded

soundeldovertwospeakers.

To turn on DTS TruSurroundTM:

1 Press the MENU button and open the Sound menu.

2 Highlight DTS TruSurroundeld,andthenpresstheOK

button.

3 Pressthe▲/▼(arrow)buttonstoselectOn, and then press the

OK button

Sound Mode

Select the Sound Mode your prefer.

To select a Sound Mode:

1 Press the MENU button and open the Sound menu.

2 Highlight Sound Modeeld,andthenpresstheOK button.

3 Pressthe▲/▼(arrow)buttonstoselectSound Mode, and then

press the OK button.

Stable SoundTM

The Stable SoundTM feature limits high volume levels and prevents

the extreme changes in volume that can occur when channels are

changed or a program switches to a commercial.

To turn on Stable SoundTM:

1 Press the MENU button and open the Sound menu.

Adjusting the audio

Setting up your TV

Selecting the PIN code

2 Highlight Stable Sound, and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn.

Stable SoundTM cannot be used at the same time as DTS TruSurround

TM.

The feature is greyed out until DTS TruSurroundTM is turned Off.

Using the Dolby ® Digital Dynamic Range Control feature

You can further compress Dolby

® Digital dynamic range, allowing

you to switch from digital to analog broadcasts at the same dynamic

range.

To use the Dolby®

Digital Dynamic Range Control:

1 Press the MENU button and open the Sound menu.

2 Highlight Dynamic Range Control, and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn, and then press the OK

button.

This feature is available when the TV is tuned to a digital RF channel

or an HDMI® input with the Dolby® Digital signal.

Selecting the PIN code

A PIN code is necessary for some menus.

The Parental Control and Locks menu is grayed out if no PIN has

been set.

Enter a new PIN code

1 Press the MENU button and open the Options menu.

2 Highlight Parental PIN Setup, and then press the OK button.

3 Usethenumberbuttonstoentera4-digitnumber.Conrmthecode.

Forgotten PIN code

While the PIN code entering screen is displayed, press the INFO

buttonfourtimeswithinveseconds.ThePINcodewillbecleared

and you can enter a new PIN code.

Setting up your TV

Using parental controls (for USA region)

Changing or deleting your PIN code

1 Press the MENU button and open the Options menu.

2 Highlight Parental PIN Setup, and then press the OK button.

3 Use the number button to enter a 4-digit number.

4 Select Change PIN or Delete PIN. Press the OK button.

Using parental controls (for USA region)

Blocking TV programs and movies by rating (V-Chip)

Some TV programs and movies include signals that classify the

content of the program (as unsuitable for younger viewers). The

V-Chip feature in this TV detects the signals and blocks the

programs according to the ratings you select.

1 Press the MENU button and open the Options menu.

2 Highlight Parental Control and Locks, and then press the OK

button.

3 Enter your four-digit PIN code.

4 Pressthe▲/▼(arrow)buttonstohighlightEnable Rating

Blocking, and press OK button.

5 Press the ▲/▼(arrow)buttons to select On, and then press the

OK button.

Picture

Installation

Parental Control and Locks

Options

Timers

Get Help

Sound

Enable Rating Blocking

Edit Rating Limits

Input Lock

Off

Network

(

Sample Image) Locks menu - Enable Rating Blocking selection

6 Pressthe▼(arrow)buttontohighlightEdit Rating Limits,

and then press the OK button. The Edit Rating Limits screen

appears.

7 Foreachdesiredselection,pressthe▲/▼/◄/►(arrow)

buttons to highlight the selection, and then press the OK button

to select it.

A box with an “ ” is a rating that will be blocked. As you X

highlightarating,adenitionfortheratingappearsatthe

bottom of the screen.

Setting up your TV

Using parental controls (for USA region)

8 To save the new settings, highlight Done, and then press the

OK button.

This feature will be not available if no PIN code is set.

Downloading an additional rating system

In the future, an additional rating system may become available for

use to selectively block TV programs and movies.

The currently tuned station must be receiving a digital signal before an

additional rating system can be downloaded.

To download the additional rating system, if available:

1 Press the MENU button and open the Options menu.

2 Highlight Parental Control and Locks, and then press the OK

button.

3 Enter your four-digit PIN code.

4 Pressthe▲/▼(arrow)buttonstohighlightEnable Rating

Blocking, and press the OK button.

5 Press the ▲/▼(arrow)buttons to select On, and then press the

OK button.

6 Pressthe▼(arrow)buttontohighlightEdit Rating Limits, and

then press the OK button.

The Edit Rating Limits screen appears.

7 Highlight Alt RS, and then press the OK button.

The Edit Alternate Ratings screen appears.

The ALT RS button will only be available if an additional rating

system is currently available.

It may take several minutes for the TV to download the additional

rating system.

The information displayed in the Alternate Ratings screen will depend

on the conﬁguration of the additional rating system available at the

time of download.

Setting up your TV

Using parental controls (for USA region)

8 Foreachdesiredselection,pressthe▲/▼/◄/►(arrow)

buttons to highlight the selection, and then press the OK button

to select it.

A box with an “ ” is a rating that will be blocked.X

9 To save the new settings, highlight Done, and then press the

OK button.

10 In the Edit Rating Limits screen, highlight Done, and then

press the OK button.

The additional rating system can only be downloaded one time. You

will not be able to download any updates to the rating system should

such updates become available.

The additional rating system is not designed, transmitted or

controlled by the TV or Toshiba, nor is the availability of an additional

rating system determined or controlled by Toshiba. Similarly, the

rating of programs in an additional rating system is not determined,

transmitted or controlled by the TV or Toshiba.

The additional rating system is an evolving technology; therefore,

availability, content and format may vary.

Setting up your TV

Using parental controls (for USA region)

Rating system

Independent rating system for broadcasters:

Ratings: Description and Content themes:

TV-MA Mature Audience Only (This program is speciﬁcally designed to be viewed

by adults and therefore may be unsuitable for children under 17.)

L) Crude or indecent language

S) Explicit sexual activity

V) Graphic violence

TV-14 Parents Strongly Cautioned (This program contains some material that many

parents would ﬁnd unsuitable for children under 14 years of age.)

D) Intensely suggestive dialogue

L) Strong, coarse language

S) Intense sexual situations

V) Intense violence

TV-PG Parental Guidance Suggested (This program contains material parents may

ﬁnd unsuitable for younger children.)

D) Some suggestive dialogue

L) Infrequent coarse language

S) Some sexual situations

V) Moderate violence

TV-G General Audience (Most parents would ﬁnd this program suitable for all

ages)

TV-Y7,

TV-Y7FV

Directed to Older Children (This program is designed for children age 7 and

above.

NOTE: Programs in which fantasy violence may be more intense or more

combative than other programs in this category are designated TV-Y7FV.)

TV-Y All Children (This program is designed to be appropriate for all children)

Independent rating system for movies:

Ratings: Description and Content themes:

X X-rated (For adults only)

NC-17 Not intended for anyone 17 and under

R Restricted (Under 17 requires accompanying parent or adult)

PG-13 Parents Strongly Cautioned (Some material may be inappropriate for

children under 13)

PG Parents Guidance Suggested (Some material may be not be suitable for

children)

G General Audience (Appropriate for all ages)

Setting up your TV

Using parental controls (for USA region)

Indication other than rating system:

Display: Description:

TV-NONE TV None

MPAA N/A Movie Not Applicable

NOT RATE Movie Not Rated

(No rating appears) No rating information is provided

If you place an “X” in the box next to “None” Rated, programs rated

“None” or “Not Rated” will be blocked; Programs that do not provide any

rating information will not be blocked.

Displaying ratings

To display the rating of the program you are watching, press the

INFO button on the remote control. If it is rated “None” the word

“NONE” appears in the INFO screen. If rating information is not

provided, no rating will appear in the INFO screen.

TV - NONE

(Sample Image) Rating Info screens

Unlocking programs temporarily

If you try to tune to a program that exceeds the rating limits you

have set, the TV will enter program lock mode and a warning

message appears on the screen.

This program exceeds the rating limit you set.

Push " MUTE " to enter PIN.

(Sample Illustration) Warning - exceeded rating limit

You can either temporarily unlock the program or select an

unlocked program to watch.

To temporarily unlock the program:

1 Press the MUTE button.

2 Enter your four-digit PIN code, and then press the OK button.

Setting up your TV

Locking channels

2 Press the ▲/▼(arrow)buttonstoselectachannelinthelock

column.

3 Press the OK button. PIN code entry will be required to set a

locked channel.

If the PIN code has not yet been set, a warning message appears.

4 A check appears in the box.

5 To remove the check, press the OK button.

6 Press the EXIT button.

Using the GameTimerTM

You can use the GameTimerTM to set a time limit for playing a video

game (30–120 minutes). When the GameTimer

TM expires, the TV

enters Input Lock mode and locks out the input source for the video

game device.

To set the GameTimerTM:

1 In the Timers menu, highlight GameTimer, and then press the

OK button.

2 Enter your four-digit PIN code.

3 Pressthe▼(arrow)buttontoselect30,60,90or120minutes,

and then press the OK button.

To cancel the GameTimerTM , select Off in step 3 above.

To deactivate the Input Lock once the GameTimer

TM has activated

it:

Set the Input Lock to Off, see “Using the input lock feature” on

page 80.

A message appears when 10 minutes, 3 minutes, and 1 minute are

remaining.

If the TV loses power with time remaining, the TV will enter Input

Lock mode when power is restored (as if the GameTimer had been

activated). To resume use, you must deactivate the Input Lock, see

“Using the input lock feature” on page 80.

Setting up your TV

Locking channels

Using the panel lock feature

You can lock the control panel to prevent your settings from being

changed accidentally (by children, for example). When Panel Lock

is set to On, none of the controls on the control panel operate except

the POWER button.

To lock the control panel:

1 In the Options menu, highlight Panel Lock, and then press the OK

button.

2 Enter your four-digit PIN code.

3 Pressthe▼(arrow)buttontoselectOn.

When the control panel is locked and any button on the control

panel (except the POWER button) is pressed, the message “NOT

AVAILABLE” appears.

Network

(Sample Illustration) Locks menu - Panel Lock selection

To unlock the control panel, select Off in Step 3 in this section or

press and hold the VOLUME (–) button on the TV control panel for

approximately 15 seconds until the volume icon appears.

Setting up your TV

MediaShare (Videos, Music, and Photos)

MediaShare provides a simple graphical interface to quickly access

andplayvideos,music,andphotoslocatedonaUSBashdrive,

compatible powered USB hard drives, or a PC, tablet or NAS HDD

connected to your home network.

To access MediaShare, press the HOME button on the remote

control.

Using MediaShare with a USB device or a Media Server

You can enjoy photo, music or video content stored on a USB

storage device or Media Server.

PhotoViewerspecications:

USB use:

Data Type: JPEG Exif ver 2.1

File format: JPEG

Maximum photo resolution: 4096 x 4096

Maximum number of les: 500 per folder

Content on a connected Media Server:

Data Type: JPEG Exif ver 2.1

File format: JPEG

Maximum photo resolution: 4096 × 4096

Maximum number of les: 500 per folder

MusicPlayerspecications:

USB use:

File format: MP3

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Bit rate: From 32 to 320 kbps

Maximum number of les: 500 per folder

Content on a connected Media Server:

File format: MP3

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Bit rate: From 32 to 320 kbps

Maximum number of les: 500 per folder

VideoPlayerspecications:

USB use:

File format: MPEG2-PS/TS/VOB, AVI, MOV, MP4, ASF,

DivX, Xvid, MKV, Motion JPEG

Setting up your TV

MediaShare (Videos, Music, and Photos)

Video: MPEG2, H.264, MPEG-4 part2, DivX, Xvid, JPEG

Audio: MPEG1-Layer1/Layer2/Layer3, MPEG2-Layer1/

Layer2/Layer3, Dolby® Digital(AC3), LPCM

Maximum number of les: 500 per folder

Maximum video resolution: 640x480 (Motion JPEG), 1920 x

1080 (other)

Content on a connected Media Server:

File format: MPEG2-PS/TS, MP4 (Low resolution)

Video: MPEG2, H.264

Audio: MPEG1-Layer1/Layer2/Layer3, MPEG2-Layer1/

Layer2/Layer3, Dolby® Digital(AC3), LPCM

Maximum number of les: 500 per folder

Maximum video resolution: 1920 x 1080

Supportedlesystem:FAT16andFAT32

Gently insert the USB device into the port and do not remove while

viewing MediaShare.

To use MediaShare please conﬁgure the network settings on your TV.

For more information, see “Connecting to a home network” on page 35.

USB device: USB Mass Storage Class device (MSC)

Connectivity is not guaranteed for all devices.

Connect the USB device to the TV directly.

Do not use a USB Hub.

You must obtain any required permission from copyright owners to

use copyright content. Toshiba cannot and does not grant such

permission.

Depending on the ﬁle size and amount in your USB storage device, it

may take some time to load before content is viewable. A message

will display on-screen when ﬁles are loading from the USB storage

device.

Only limited types of U3 USB device are supported. Therefore, it is

suggested that you not use U3 USB with MediaShare.

Non-supported characters will be replaced with a square.

Setting up your TV

MediaShare (Videos, Music, and Photos)

Auto Start function

When Auto Start is enabled, you will be asked if you want to start

the MediaShare when a USB device is inserted. If Auto Start is

disabled, you must manually start the MediaShare from the menu.

To change the Auto Start setting:

1 In the Options menu, highlight MediaShare Setup, and then press

the OK button.

2 Highlight USB Auto Start, and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn or Off.

To open the MediaShare

There are two methods for starting the MediaShare: auto start and

manual start.

Auto Start:

1 Gently insert a supported USB storage device to the USB port

on the back of the TV. A prompt will appear.

If you repeatedly insert and remove the USB connector, the prompt may

not appear.

2 Press the ◄/►(arrow) buttons to select Yes, and then press the

OK button.

The MediaShare menu appears. (If you select No, nothing

happens.)

(Sample Image) MediaShare - open screen

If Auto Start is set to Off, you can start the MediaShare manually.

Manual Start:

1 In the Options menu, highlight MediaShare Setup, and then press

the OK button.

2 Pressthe▲/▼(arrow)buttonstohighlightMediaShare, and then

press the OK button.

3 Pressthe◄/►(arrow)buttonstohighlightPhoto, Music, or

Videos and then press the OK button.

Setting up your TV

MediaShare (Videos, Music, and Photos)

4 The focus will jump to one of the supported devices at the bottom,

select one of them, and then press the OK button.

Phot o Music Video s

(Sample Image) MediaShare setup screen

The viewer will open even if there are no photo or music ﬁles.

While the MediaShare is active, the main menus cannot be displayed.

Viewing photo ﬁles

There are three types of view modes: multi view, single view, and

slide show. Within Slide show, you can skip forward, repeat, and set

time interval.

Multi View

This view allows you to search for photos in a grid format.

Ret urn XXX .JPG XXX .JPG XXX .JPG XXX .JPG XXX .JPG

XXX .JPG XXX .JPG XXX .JPG XXX .JPG XXX .JPG

XXX .JPG

XXX .JPG XXX .JPG XXX .JPG XXX .JPG XXX .JPG

/USB/sda1/Photos 1/60Direct ories: 0 Files: 17 T otal: 1013

(Sample Image) Media Play - photos screen

To use multi view:

1 Pressthe▲/▼/◄/►(arrow)buttonstomovethehighlightin

onewindow.Ifallofthephotoswillnottinonescreen,the

screenwillmovetothepreviouspagewhenyoupress◄from

thetoplefticon.Whenyoupress►fromthebottomrighticon,

the screen will move to the next page. You can also use the

▲/▼(arrow) buttons to page up or down the in photo list when

therearemorephotosthanwilltononescreen.

Setting up your TV

MediaShare (Videos, Music, and Photos)

2 When you select a folder, press the OK button to move to the

next layer, or press the BACK button to return to the previous

layer.

3 Press the OK button to view the selected photo in Single View

mode.

Single view

Inthisviewmode,onlyleslocatedintheselecteddirectorywillbe

displayed. This view allows you to change the photo content

manually. When you move from Multi View to the Single View, the

currently selected photo is displayed.

To use single view:

Pressthe►(arrow)buttontoviewthenextphoto.Press◄to

view the previous photo.

Press▲torotatetheimage90°counterclockwise.Press▼to

rotatetheimage90°clockwise.

Slide show

This view allows you to watch a slide show of the photos. In this

mode,onlyleslocatedintheselecteddirectorywillbeplayed.

To use slide show:

1 Press the OK button in the Single View mode.

2 Pressthe◄/►(arrow)buttonstoviewthepreviousornext

photo.

To set Interval Time and Repeat settings:

1 Press the MENU button to open the Quick Menu.

2 Press the ▲/▼(arrow) buttons to select either Interval Time

or Repeat.

3 Press the ◄/►(arrow) buttons to adjust the setting and press

the BACK button.

Picture size functions are disabled.

To close the Photo Viewer, press the EXIT button. The television

will return to the last viewed channel or external input.

Setting up your TV

MediaShare (Videos, Music, and Photos)

Playing music ﬁles

Youcanlistentomusicfromalistofavailableles.Whenlistening

tomusicles,youcanselectmusiclists,play,pause,stop,skip,

repeat play, and adjust sound settings.

Return XXX .mp3 XXX .mp3 XXX .mp3 XXX .mp3 XXX .mp3

XXX .mp3 XXX .mp3 XXX .mp3 XXX .mp3 XXX .mp3

XXX .mp3

XXX .mp3 XXX .mp3 XXX .mp3 XXX .mp3 XXX .mp3

/USB/sda1/Music 1/3Directories: 0 Files: 17 Total: 43

(Sample Image) MediaShare - music list

After opening MediaShare and selecting Music (see “To open the

MediaShare” on page 85). Press the

▲

/▼/

◄

►

(arrow) buttons to

selectaleorfolder.Youcanusethe

▲/▼(arrow)

buttons to page up

ordownthemusiclistwhentherearemorelesthanwilltontoone

screen.

2 Select the desired folder and press the OK button to move to

the next layer. Press the BACK button to move back to the

previous layer.

3 Withthedesiredleselected,presstheOK button or the PLAY

button to start playback.

4 Press the STOP button to stop playback

If playback ﬁnishes before STOP is pressed, the next ﬁle will

automatically start to play from the beginning.

Depending on the ﬁle size, it may take some time for playback to

begin.

During playback you can do the following:

Press PAUSE to pause.

To resume normal playback, press PLAY.

Tolocateaspecicle,presstheSKIP Reverse or SKIP

Forward button repeatedly.

To adjust volume, press the VOL (+ –) buttons.

To play in fast reverse or fast forward, press REV or FF during playback.

Each time you press REV or FF, the playback speed changes.

Setting up your TV

To set the repeat mode:

If playback ﬁnishes before STOP is pressed, the next ﬁle will

automatically start to play from the beginning.

Depending on the ﬁle size, it may take some time for playback to

begin.

During playback you can do the following:

Press PAUSE to pause.

To resume normal playback, press PLAY.

Tolocateaspecicle,presstheSKIP Reverse or SKIP

Forward button repeatedly.

To adjust volume, press the VOL (+ -) buttons.

To play in fast reverse or fast forward, press REV or FF during

playback. Each time you press REV or FF, the playback speed

changes.

During playback, you can adjust the picture and sound functions

from the Quick Menu.

To set the repeat mode:

1 Press the MENU button to open the Quick Menu.

2 Pressthe▲/▼(arrow)buttonstoselectRepeat.

3 Pressthe◄/►(arrow)buttonstoselectOff, All or 1.

4 Press the BACK button.

To close the Video Player, press the EXIT button.

To select subtitle or audio track (if available in the video content):

1 Press the MENU button to open the Quick Menu.

2 Pressthe▲/▼(arrow)buttonstoselectOptions.

3 Highlight Subtitle Track or Audio Track, and then press the

◄/►toselecttrackyouprefer.

4 Press the BACK button.

To close the Video Player, press the EXIT button.

MediaShare (Videos, Music, and Photos)

Setting up your TV

Setting the sleep timer

To playback DivX HD content:

To play in fast reverse or fast forward directions, press the 

or  button during playback. Each time you press the  or

 button, the playback speed will change.

If the content contains no chapter, this TV generates original

chapter point in 10% increments for 10 chapters in total, that

are accessible by using the Number buttons on the remote

control.

During playback, press the button to skip to the beginning of the

next chapter.

When the button is pressed twice in succession, it will repeat

two times of above.

If the buttonispressedatthelastchapter,theconrmation

message will appear.

If Yes is selected, playback will skip to the beginning of the next

content.

Press the button to skip to the beginning of the current chapter.

When the button is pressed twice in succession, it will skip to

the beginning of the previous chapter. If the button is pressed

twicecontinuouslyattherstchapter,playbackofthecurrent

contentwillstopandtheconrmationmessagewillappear.IfYesis

selected, playback will skip to the beginning of the previous

content.

Setting the sleep timer

You can set the sleep timer to turn off the TV after a set length of

time (maximum of 12 hours).

To set the sleep timer using the remote control:

1 Press the SLEEP button on the remote control to set the length

of time the TV remains on until the TV turns off.

2 Repeatedly press the SLEEP button to increase the time in

10-minute increments, or press the ▲/▼(arrow)buttonsto

increase or decrease the time in 10-minute increments, to a

maximum of 12 hours.

To set the sleep timer using the on-screen menus:

1 In Timers menu, highlight Sleep Timer, and then press the

OK button.

Setting up your TV

Using HDMI® CEC

2 Press the Number buttons to enter the length of time

(maximum of 12 hours) and then press the OK button. Or press

the ▲/▼(arrow)buttonstoincreaseordecreasein10-minute

increments (maximum of 12 hours).

If a power failure occurs, the sleep timer setting may be cleared.

To display the time remaining until the TV turns off, press the

SLEEP button.

To cancel the sleep timer, repeatedly press SLEEP until it is set to 0

minutes.

No Signal Power Down

The TV will automatically turn itself off after 15 minutes when no

signal is detected. You can change the setting to Off for the

following purposes:

Low signal strength of analog channel (no signal detection)

Only Audio L/R is connected to external input to listen to music

through the TV speakers.

To change the no signal power down setting:

1 From the Options menu, highlight Power Management, and

then press the OK button.

2 Highlight No Signal Power Down, and then press the OK

button.

3 Pressthe▲/▼(arrow)buttonstohighlighttheitemyouwant

tochange,andpressthe◄/►(arrow)buttonstoselectOn or

Off.

Default setting for this feature is On.

A warning message will appear 1 minute before the TV turns off.

Using HDMI® CEC

This is a new feature that uses CEC technology and allows you to

control Toshiba HDMI® CEC compatible devices from the TV

remote via HDMI® (see “HDMI® CEC connection” on page 31).

When Enable HDMI CEC Control in the HDMI CEC Control

Setup menu is set to On (see “Setting up HDMI

® CEC” on page 96),

the HDMI® CEC functions described below will be enabled.

No Signal Power Down

Setting up your TV

Using HDMI® CEC

HDMI® CEC playback device (Blu-rayTM/DVD player, etc.) control

With your TV’s remote control, or using the HDMI

® CEC Player

Control menu, you can control the connected HDMI

® CEC

playback device you are watching.

Available remote control key functions

Button: Description:

PLAY Begin playback

STOP Stop playback

PAUSE Pause the picture during play or record mode

SKIP Forward Skip forward

SKIP Reverse Skip backward

FF Fast forward

REW Rewind/reverse

▲/▼/◄/► Navigates menu options

OK Enters menu options

EXIT Return to the previous menu

These functions depend on the devices connected.

HDMI® CEC Player Control menu functions

To control the HDMI® CEC player from the menu:

1 From the Options menu, highlight HDMI CEC Player

Control, and then press the OK button.

Network

(Sample Image) Preferences menu - HDMI

® CEC Player Control

2 Pressthe▲/▼(arrow)buttonstoselecttheitemyouwishto

control and press the OK button.

Setting up your TV

Using HDMI® CEC

Item: Description:

Power Turns the select device On/Off

Root Menu Accesses the root menu of the selected device

Contents Menu Accesses the contents list when you press OK. At this time, the HDMI

CEC Player Control menu disappears.

Setup Menu Accesses the setup menu of a selected device

Top Menu Accesses the top menu of a selected device

Menu Accesses the menu of a selected device

These functions depend on the devices that are connected.The HDMI®

CEC Player Control item will be grayed out in the following conditions:

A non-HDMI® input is currently selected.

The Enable HDMI CEC item is set to Off.

The connected CEC device is not a playback or recording device.

HDMI® CEC input source selection

If an HDMI® CEC device with HDMI® switching capability (e.g.

Audio Receiver) is connected to the HDMI

® input, you can select

another HDMI® CEC device that is connected to the master HDMI

device using the TV’s INPUT button, see “Selecting the video input

source” on page 54.

VOLUME and MUTE controls of Audio Receiver

With your TV’s remote control, you can adjust or mute the sound

volume of the Audio Receiver.

VOL (+ –) buttons adjust the volume level.

MUTE button turns off the sound.

To use this function:

Set Initial Speaker Setting to Receiver in the HDMI CEC

Control Setup menu.

ConrmthataconnectedHDMI

® CEC device (such as DVD

player, etc.) is selected for the Audio Receiver input source.

These functions depend on the device connected.

Initial Speaker Setting will be grayed out if Ampliﬁer Control is

set to Off.

Setting up your TV

Using HDMI® CEC

Other HDMI® CEC functions

When the Enable HDMI CEC Control and each item in the

HDMI CEC Control Setup menu are set to On, the following

functions will be enabled.

Item: Description:

TV Auto Power If an HDMI® CEC device is turned on, the TV turns on automatically.

Auto Standby If the TV is turned off, the TV will send a message to turn off all of the

HDMI® CEC devices connected to the TV.

Ampliﬁer Control If Ampliﬁer Control is set to On, you can adjust the sound volume or

turn off the sound using the remote control.

Initial Speaker Setting From this item, you can set your audio output preference to the TV

speakers or the audio receiver speakers. When this item is set to

Receiver, the TV remote can be used to adjust or mute the volume of the

audio. This item will be grayed out when Ampliﬁer Control is set to

Off.

When you turn on the Audio Receiver, change its input source or adjust

the sound volume, the sound will be output from the audio receiver’s

speakers even if TV Speakers have been selected. Turn the TV off and on

again to output the sound from the TV speakers.

Setting up HDMI® CEC

To set the HDMI® CEC Setup:

1 From the Options menu, highlight HDMI CEC Control

Setup and press the OK button.

2 Highlight Enable HDMI CEC Control, and then press the

OK button.

3 Select On, and then press the OK button.

If you select Enable HDMI CEC Control Off, the other items will be

grayed out.

4 Pressthe▲/▼(arrow)buttonstohighlighttheHDMI

® CEC

Setup item you want to use, and press the OK button, follow by

▲/▼(arrow)buttons.

TV Auto Power: On/Off

Auto Standby: On/Off

Amplier Control: On/Off

Initial Speaker Setting: TV/Receiver

Setting up your TV

Displaying TV status information

To display TV status information using the INFO button:

Press the INFO button on the remote control.

The following information will be displayed (if applicable):

Current input (ANT/CABLE, Video, etc.)

If ANT/CABLE is the current input, either “CABLE” (for cable

TV) or “ANT” (for over-the-air broadcasts).

Channel number (if in ANT/CABLE mode)

Digital signal strength indicator (bar graph in lower right corner

of box; for digital signals only)

Stereo, Mono, or SAP audio status (when in HDMI® input

mode, Dolby® Digital, or PCM)

Video resolution

Aspect ratio of incoming video signal (4:3 or 16:9)

V-Chip rating status

GameTimer (if set)

Title

Duration

Detailed description

ANT 69-1 ABCD 1080i TV-PG

16:9

Now

The ABCD Show

ABCD New at 5:00pm

05:00pm-06:00pm EST

08:00pm-09:00pm

Dolby Digital

(Sample Illustration) Info banner

To close the INFO screen, press the INFO button again.

Setting up your TV

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last Mode

Memory feature automatically turns on the TV when the power is

resupplied.

If you know you will be away from the TV for an extended period of time

you should unplug the power cord.

100

Chapter 7

Using the TV’s Advanced

Features

Using the advanced picture settings

ColorMaster™

The ColorMaster™ feature gives you precise control of Hue,

Saturation, and Brightness for six primary colors: Red, Green, Blue,

Yellow, Magenta, and Cyan. Now you can adjust the image color

exactly the way you want it.

1 From the Picture menu, highlight Advanced Picture Settings,

and then press the OK button.

2 Highlight ColorMaster, and then press the OK button.

3 Press the ▲/▼(arrow)buttonstoselectOn, and then press the

OK button.

Base Color Adjustment

When ColorMaster™ is set to On, the list of base colors appears.

You can select a base color to adjust.

1 From the Picture menu, highlight Advanced Picture Settings,

and then press the OK button.

2 Highlight Base Color Adjustment and then press the OK

button.

101

Using the TV’s Advanced Features

Using the advanced picture settings

3 Pressthe▲/▼(arrow) buttons to select a color. Press the OK

button.

4 Press the ◄/►(arrow) buttons to select Hue, Saturation, or

Brightness.

5 Pressthe▲/▼(arrow)buttonstoadjustthesetting.

6 Repeat Steps 3 through 5 to adjust other colors.

To reset the adjustments to the factory defaults, select Reset on

the screen. Press the OK button.

Color Temperature

You can change the quality of the picture by adjusting three preset

Color Temperatures (Cool, Medium, and Warm), as described

below.

Mode: Picture Quality:

Cool blueish

Medium neutral

Warm reddish

1 From the Picture menu, highlight Advanced Picture Settings,

and then press the OK button.

2 Highlight Color Temperature and then press the OK button.

3 Press the OKbutton,followby▲/▼(arrow)buttonstoselect

the desired color temperature, and then press the OK button.

4 Pressthe▲/▼(arrow)buttonstohighlightRed, Green, or

Blue level,andthenpressthe◄/►(arrow)buttonstoadjust

the level. Press the EXIT button.

The Red, Green, and Blue level settings are connected to the Color

Temperature settings and will change based on which preset color

temperature (Cool, Medium, or Warm) is selected.

Static Gamma

The static gamma feature lets you adjust the levels of black in the

picture.

1 From the Picture menu, highlight Advanced Picture Settings,

and then press the OK button.

2 Highlight Static Gamma and then press the OK button.

3 Press the ◄/►(arrow)buttons to adjust the level of black

detail. Press the EXIT button.

102

Using the TV’s Advanced Features

Using the advanced picture settings

If the setting is decreased, the detail of black colors is

decreased.

If the setting is increased, the detail of black colors is

increased.

DynaLightTM

The DynaLightTM feature automatically strengthens the black

coloring of dark areas in the video according to the level of

darkness.

1 From the Picture menu, highlight Advanced Picture Settings, and

then press the OK button.

2 Highlight DynaLight and then press the OK button.

3 Pressthe▲/▼(arrow) buttons to select High, Low, or Off. Press

the OK button.

Dynamic Contrast

Dynamic Contrast detects changes in picture quality that affect the

appearance of your contrast settings and then automatically adjusts

the video.

1 From the Picture menu, highlight Advanced Picture Settings, and

then press the OK button.

2 Highlight Dynamic Contrast and then press the OK button.

3 Pressthe▲/▼(arrow) buttons to select High, Middle, Low, or

Off. Press the OK button.

Cinema Mode

When you view a DVD (3:2 pulldown processed) from a DVD

player connected to the VIDEO, ColorStream

TM HD (component

video), or HDMI® inputs on the TV, smoother motion can be

obtained by setting the Cinema Mode to On. (available for 480i and

1080i signals).

1 From the Picture menu, highlight Advanced Picture Settings, and

then press the OK button.

2 Highlight Cinema Mode and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn or Off. Press the

OK button.

103

Using the TV’s Advanced Features

Using the advanced picture settings

Noise Reduction

MPEG NR

The MPEG noise reduction feature allows you to reduce visible

interference caused by MPEG compression.

1 From the Picture menu, highlight Advanced Picture Settings, and

then press the OK button.

2 Highlight Noise Reduction and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectMPEG NR and then

press the OK button.

4 Pressthe▲/▼(arrow)buttonstoselectHigh, Middle, Low, or

Off, and then press the OK button.

DNR (Dynamic Noise Reduction)

DNR lets you soften the screen representation of a weak signal to

reduce the noise effect.

1 From the Picture menu, highlight Advanced Picture Settings, and

then press the OK button.

2 Highlight Noise Reduction and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectDNR and then press

the OK button.

4 Pressthe▲/▼(arrow)buttonstoselectHigh, Middle, Low, or

Off, and then press the OK button.

Edge Enhancer

The EdgeEnhancerfeaturedenestheedgesandtexturesfor

greater image details to make the picture look crisp and clear.

1 From the Picture menu, highlight Advanced Picture Settings, and

then press the OK button.

2 Highlight Edge Enhancer and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn or Off. Press the

OK button.

This feature may not work properly depending on the content.

Specyfikacje produktu

Marka:	Toshiba
Kategoria:	Telewizja
Model:	40L3400U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Toshiba 40L3400U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Telewizja Toshiba

Toshiba 65UA2363DG Instrukcja

17 Lutego 2025

Toshiba 50QV3F63DG Instrukcja

11 Lutego 2025

Toshiba 40QA2F63DG Instrukcja

10 Lutego 2025

Toshiba 65QV3363DG Instrukcja

9 Lutego 2025

Toshiba 42PW23P Instrukcja

6 Lutego 2025

Toshiba 50XP27 Instrukcja

6 Lutego 2025

Toshiba 20VL43P Instrukcja

1 Lutego 2025

Toshiba 43L3663 Instrukcja

19 Stycznia 2025

Toshiba 15V31D Instrukcja

19 Stycznia 2025

Toshiba 28N04D Instrukcja

17 Stycznia 2025

Instrukcje Telewizja

Najnowsze instrukcje dla Telewizja

Daewoo 14C7GT Instrukcja

9 Kwietnia 2025

Philips 14pt2694 Instrukcja

9 Kwietnia 2025

Panasonic Viera TX-L32D28 Instrukcja

9 Kwietnia 2025

Panasonic TX-L24C5B Instrukcja

9 Kwietnia 2025

Panasonic TX-24E302B Instrukcja

9 Kwietnia 2025

Panasonic TX-26LX62FA Instrukcja

9 Kwietnia 2025

Panasonic TX-24CS500B Instrukcja

9 Kwietnia 2025

TCL 65P69K Instrukcja

9 Kwietnia 2025

TCL 55P69K Instrukcja

9 Kwietnia 2025

TCL 50P69K Instrukcja

9 Kwietnia 2025