Instrukcja obsługi TOA VP-2122

TOA odbiornik VP-2122

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA VP-2122 (180 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/180
INSTALLATION MANUAL
MATRIX SYSTEM SX-2000 SERIES
When an EN 54-16 compliant SX-2000 system has to be installed, then read "APPENDIX: ADDITIONAL
INSTALLATION INSTRUCTIONS FOR AN EN 54-16 COMPLIANT SYSTEM" in this document carefully
and follow up the installation and configuration requirements explained herein. This APPENDIX contains
the basic description of settings and installations, so please refer to the general instruction sections in
this document for more details.
Note
Refer to the Instruction Manual attached to the VX-2000DS for the installation of the the VX-2000DS
Emergency power supply, the VX-2000PF Power supply frame, and the VX-200PS Power supply unit.
1134
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany
The year when the CE mark was affixed on the product
is indicated by the first two digits of the serial number.
1134-CPD-102
EN 54-16: 2008
Fire detection and fire alarm systems
— Part 16: Voice alarm control and indicating equipment
Options:
Emergency microphone(s)
Manual reset of the voice alarm condition
Indication of faults related to voice alarm zones
Phased evacuation
Voice alarm condition output to CIE
Redundant power amplifiers
Thank you for purchasing TOA's Matrix System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
2
TABLE OF CONTENTS
1. NOMENCLATURE AND FUNCTIONS
1.1. SX-2000SM System Manager .................................................................................. 6
1.2. SX-2000AI Audio Input Unit ................................................................................... 10
1.3. SX-2100AI Audio Input Unit ................................................................................... 15
1.4. SX-2000AO Audio Output Unit ............................................................................... 20
1.5. SX-2100AO Audio Output Unit ............................................................................... 26
1.6. SX-2000CI Control Input Unit ................................................................................. 32
1.7. SX-2000CO Control Output Unit ............................................................................ 34
1.8. RM-200SF Fireman's Microphone ......................................................................... 36
1.9. RM-200SA Remote Microphone ............................................................................ 39
1.10. RM-210 Remote Microphone Extension ................................................................ 42
1.11. RM-200RJ Terminal Unit ........................................................................................ 43
1.12. Optional Modules
1.12.1. SX-200RM Remote Microphone Interface Module .................................... 44
1.12.2. D-921E Microphone/Line Input Module ...................................................... 45
1.12.3. D-921F Microphone/Line Input Module ...................................................... 45
1.12.4. D-922E Microphone/Line Input Module ...................................................... 46
1.12.5. D-922F Microphone/Line Input Module ...................................................... 46
1.12.6. D-936R Stereo Input Module ..................................................................... 47
1.13. VP-2064, VP-2122, VP-2241, and VP-2421 Power Amplifiers .............................. 48
1.14. VP-200VX Power Amplifier Input Module ............................................................... 48
2. INSTALLATION
2.1. SX-2000SM
2.1.1. System reset enable/disable settings (DIP switch 3 operation) ................... 49
2.1.2. Failure reset operation method settings (DIP switch 4 operation) ............... 50
2.2. SX-2000AI and SX-2100AI
2.2.1. Module installation ....................................................................................... 51
2.2.2. Setting the device number ........................................................................... 52
2.2.3. Changing the type of control outputs (SX-2100AI only) ............................... 53
2.3. SX-2000AO and SX-2100AO
2.3.1. Setting the device number ........................................................................... 55
2.3.2. 24 V Emergency cutoff input settings (DIP switch 8 operation)
(SX-2000AO only) ........................................................................................ 56
2.3.3. Converting an output into a transformer-balanced output
(SX-2000AO only) ........................................................................................ 57
2.3.4. Changing the method of power supply for the control input signal
applied to the Local Audio Control Input Terminal (SX-2100AO only) ......... 60
2.4. SX-2000CO ............................................................................................................ 62
2.5. RM-200SF, RM-200SA, and RM-210
2.5.1. RM-200SF and RM-200SA device number settings
(DIP switches 1 – 3 operation) ..................................................................... 64
2.5.2. Adjusting microphone sensitivity (RM-200SF: DIP switch 5 operation
or RM-200SA: DIP switch 4 operation) ........................................................ 66
2.5.3. CPU OFF function (general urgency all-call) settings
(RM-200SF:DIP switch 6 operation or RM-200SA: DIP switch 5 operation)
..... 68
2.5.4. RM Communication function setting
(RM-200SF: DIP switch 4 operation or RM-200SA: DIP switch 6 operation)
.... 69
2.5.5. Using an external microphone (RM-200SA only) ......................................... 70
2.5.6. Compressor function setting ........................................................................ 72
2.5.7. Microphone fault detection function settings (RM-200SA only) ................... 74
3
2.5.8. Installing the RM-200SF on a wall ............................................................... 75
2.5.9. RM-200SA expansion with the addition of the RM-210
(Installed on a flat surface) ........................................................................... 79
2.5.10. Installing the RM-200SA on a wall ............................................................. 80
2.5.11. Installing the RM-210 on a wall .................................................................. 81
2.5.12. Creating remote microphone name labels ................................................. 83
2.6. VP-2064, VP-2122, VP-2241 and VP-2421 Power Amplifiers
2.6.1. Removing the VP Power Amplifier's top panel ............................................. 87
2.6.2. Changing the speaker line voltage ............................................................... 87
2.6.3. Installing the VP-200VX Power Amplifier Input Module
in the VP Power Amplifiers ........................................................................... 89
2.6.4. Ground lifting using the VP-200VX Power Amplifier Input Module .............. 91
2.6.5. Replacing the blade fuse .............................................................................. 92
2.7. Rack Mounting ....................................................................................................... 93
3. SYSTEM CONFIGURATION EXAMPLE
3.1. System Configuration Example 1 ........................................................................... 94
3.2. System Configuration Example 2 ........................................................................... 95
4. CONNECTIONS
4.1. Removable Terminal Plug Connection ................................................................... 96
4.2. Input Equipment Connections
4.2.1. Connections of SX-2100AO's Local audio control input terminals ............... 97
4.2.2. Connecting the SX-200RM to the RM-200SF or RM-200SA
(via RM-200RJ as needed) .......................................................................... 99
4.2.3. Connecting other input equipment ............................................................. 104
4.3. Output Equipment Connections
4.3.1. Connecting the SX-2000AO to power amplifiers ........................................ 106
4.3.2. Connecting the SX-2100AO to power amplifiers and speakers ................. 107
4.3.3. Connecting the SX-2100AO to external attenuators .................................. 108
4.3.4. Connecting the SX-2100AO to standby amplifiers ..................................... 109
4.4. Control Input/Output Connections
4.4.1. SX-2000SM ................................................................................................ 110
4.4.2. SX-2100AI .................................................................................................. 112
4.4.3. SX-2000AO and SX-2100AO ..................................................................... 115
4.4.4. SX-2000CI .................................................................................................. 118
4.4.5. SX-2000CO ................................................................................................ 119
4.5. SX Link Terminal Connections ............................................................................. 120
4.5.1. Redundant configuration of switching hubs ............................................... 121
4.5.2. Non-redundant configuration of switching hubs ......................................... 122
4.6. CI/CO Link Terminal Connections
4.6.1. Connecting a single SX-2000CI or SX-2000CO ........................................ 123
4.6.2. Connecting one each of SX-2000CI and SX-2000CO ............................... 123
4.7. Analog Link Terminal Connections ...................................................................... 124
4.8. Connections to Use the Surveillance Function
4.8.1. Speaker line surveillance (SX-2100AO only) ............................................. 125
4.8.2. Control line surveillance ............................................................................. 129
5. SPEAKER LINE INITIAL SETTING
5.1. Setting Items ........................................................................................................ 130
5.2. OPEN/SHORT Criterion by Comparing the Current Value
with the Initial Value ............................................................................................. 130
5.3. Setting Procedures
5.3.1. Summary setting procedures ..................................................................... 131

Specyfikacje produktu

Marka: TOA
Kategoria: odbiornik
Model: VP-2122

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TOA VP-2122, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik TOA

TOA

TOA DA-250FH CU Instrukcja

5 Października 2024
TOA

TOA AV-20D Instrukcja

4 Października 2024
TOA

TOA DA-250F Instrukcja

28 Września 2024
TOA

TOA A-2240DD Instrukcja

14 Września 2024
TOA

TOA WT-5810 Instrukcja

12 Września 2024
TOA

TOA VX-015DA Instrukcja

5 Września 2024
TOA

TOA DA-500F-HL Instrukcja

3 Września 2024
TOA

TOA A-2120DD Instrukcja

27 Sierpnia 2024
TOA

TOA DA-250D Instrukcja

27 Sierpnia 2024
TOA

TOA DA-250DH Instrukcja

25 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025