Instrukcja obsługi TOA SR-H3S

TOA głośnik SR-H3S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA SR-H3S (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
OPERATING INSTRUCTIONS
LINE ARRAY SPEAKERS
EXTENSION PLATE (optional)
SR-H2L
SR-H2S
SR-H3L
SR-H3S
SR-EP3
SR-H3L
(Long and Linear type)
SR-H3S
(Long and Curved type)
SR-H2L
(Short and Linear type)
SR-H2S
(Short and Curved type)
Thank you for purchasing TOA's Line Array Speakers and their associated products.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ......................................................................................... 3
2. GENERAL DESCRIPTION ....................................................................................... 5
3. FEATURES ................................................................................................................... 5
4. ABOUT COVERAGE AREA .................................................................................... 6
5. DIMENSIONAL DIAGRAMS
5.1. Line Array Speaker SR-H2L (Short and Linear type) ................................................. 7
5.2. Line Array Speaker SR-H2S (Short and Curved type) ............................................... 7
5.3. Extension Plate SR-EP3 (optional) ............................................................................ 7
5.4. Line Array Speaker SR-H3L (Long and Linear type) .................................................. 8
5.5. Line Array Speaker SR-H3S (Long and Curved type) ................................................ 8
6. INTERNAL WIRING DIAGRAM
6.1. Line Array Speaker SR-H2L and SR-H2S .................................................................. 9
6.2. Line Array Speaker SR-H3L and SR-H3S .................................................................. 9
7. INPUT TERMINAL CONNECTION ...................................................................... 10
8. CHANGING TO HIGH IMPEDANCE ................................................................... 11
9. JOINING SPEAKERS .............................................................................................. 12
10. INSTALLATION EXAMPLES USING THE OPTIONAL BRACKETS ....... 13
11. DIGITAL PROCESSOR FILTERING
11.1. When using the SR-H2L ......................................................................................... 14
11.2. When using the SR-H2S ........................................................................................ 14
11.3. When using the SR-H3L or Linked Speakers ......................................................... 14
11.4. When using the SR-H3S ........................................................................................ 14
12. SPECIFICATIONS
12.1. Line Array Speaker SR-H2L and SR-H2S .............................................................. 15
12.2. Line Array Speaker SR-H3L and SR-H3S .............................................................. 15
12.3. Extension Plate SR-EP3 (optional) ........................................................................ 16
3
When Installing the Unit
• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.
• Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts
causes the unit to fall off, resulting in personal injury. Also, when it gets wet with rain, there is a danger of
electric shock.
• Do not use other methods than specified to mount the bracket. Extreme force is applied to the unit and the
unit could fall off, possibly resulting in personal injuries.
• Use nuts and bolts that are appropriate for the ceiling's or wall's material and structure. Failure to do so may
cause the speaker to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent
accidents that could result in personal injury.
• Use the specified mounting bracket in combination. Doing otherwise may cause the unit or component to fall
off, resulting in personal injury.
• Do not mount the unit in locations exposed to constant vibration. The mounting bracket can be damaged by
excessive vibration, potentially causing the unit to fall, which could result in personal injury.
• (Applicable when mounting the speaker on a speaker stand)
Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.
Doing so may result in the unit falling down and causing personal injury and/or property damage.
• (Applicable when suspending the speaker)
Refer all installation work to the qualified professionals. Installation for flying requires extensive technical
knowledge and experience. The speaker may fall off if incorrectly installed, resulting in possible personal
injury.
• Flying Precautions (applicable when suspending the speaker)
Be sure to follow the instructions below. Otherwise, the suspension wires or belts may be off or snap and
the speaker may fall off, causing personal injury.
· Check to confirm that the suspension wires and belts are strong enough to withstand the speaker load.
· The connectors of the suspension wires and belts must be securely linked with those of the speaker.
· All parts and components (such as enclosures, metal pieces, and screws) must be free from any
deformation, crack, and corrosion.
· Be sure to use screws supplied with the optional flying hardware when installing the speaker using such
hardware.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING

Specyfikacje produktu

Marka: TOA
Kategoria: głośnik
Model: SR-H3S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TOA SR-H3S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik TOA

TOA

TOA PC-391T Instrukcja

9 Października 2024
TOA

TOA PC-391 Instrukcja

9 Października 2024
TOA

TOA PC-1860EN Instrukcja

9 Października 2024
TOA

TOA PC-2360EN Instrukcja

9 Października 2024
TOA

TOA F-1300W Instrukcja

9 Października 2024
TOA

TOA PC-3WR Instrukcja

9 Października 2024
TOA

TOA TZ-205 Instrukcja

9 Października 2024
TOA

TOA PC-2668 Instrukcja

9 Października 2024
TOA

TOA PC-3WR-L Instrukcja

9 Października 2024
TOA

TOA BS-1120W Instrukcja

9 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024