Instrukcja obsługi TOA SR-A18B

TOA głośnik SR-A18B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA SR-A18B (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
OPERATING INSTRUCTIONS
LINE ARRAy SPEAkER
SR-A12L, SR-A12S, SR-A18B,
SR-A12LWP, SR-A12SWP
RIGGING FRAmE
SR-RF12, SR-RF12WP
TILT JOINT PLATE
SR-TP12
Thank you for purchasing TOA’s Line Array speaker system, Rigging Frame and Tilt Joint Frame.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
Note that casters must be prepared separately.
2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ............................................................................... 3
2. GENERAL DESCRIPTION ............................................................................. 5
3. FEATURES .......................................................................................................... 5
4. DIMENSIONS ...................................................................................................... 5
5. INPUT CONNECTORS .................................................................................... 9
6. INTERNAL WIRING DIAGRAM ................................................................... 10
7. CONNECTIONS ................................................................................................ 10
8. DIGITAL PROCESSOR SETTINGS ........................................................... 11
9. FLYING
9.1. General Description ......................................................................................... 12
9.2. SR-RF12(WP) Rigging Frame Assembly ......................................................... 13
9.3. Joining the Enclosure to the Rigging Frame .................................................... 14
9.4. Joining Enclosures ........................................................................................... 15
9.5. Notes on Flying ................................................................................................ 16
10. STACKING
10.1. General Description ...................................................................................... 18
10.2. SR-RF12 Rigging Frame Assembly .............................................................. 18
10.3. Mounting the Enclosure to the Rigging Frame ............................................. 19
10.4. Joining Enclosures......................................................................................... 20
10.5. Notes on Stacking ......................................................................................... 20
10.6. Tilting the Enclosure Downward .................................................................... 21
11. SPECIFICATIONS ..................................................................................... 23
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down and causing personal injury and/or property
damage.
• Refer all installation work to the dealer from whom
the speaker was purchased. Installation for flying
requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
• Flying Precautions
Be sure to follow the instructions below. Otherwise,
the suspension wires or belts may be off or snap
and the speaker may fall off, causing personal
injury.
· Check to confirm that the suspension wires and
belts are strong enough to withstand the speaker
load.
· The connectors of the suspension wires and belts
must be securely linked with those of the
speaker.
· All parts and components (such as enclosures,
metal pieces, and screws) must be free from any
deformation, crack, and corrosion.
· Be sure to use screws supplied with the optional
flying hardware when installing the speaker using
such hardware.
• Install the unit only in a location that can
structurally support the weight of the unit and the
mounting bracket. Doing otherwise may result in
the unit falling down and causing personal injury
and/or property damage.
• (SR-A12LWP, SR-A12SWP, SR-RF12WP only)
When installing the unit in a snowy area, take
appropriate measures to prevent snow from lying
on the unit. If the snow lies on the unit, the unit may
fall, causing personal injuries.
• Owing to the unit's size and weight, be sure that at
least two persons are available to install the unit.
Failure to do so could result in personal injury.
• Do not use other methods than specified to mount
the bracket. Extreme force is applied to the unit
and the unit could fall off, possibly resulting in
personal injuries.
• Use nuts and bolts that are appropriate for the
ceiling's or wall's structure and composition. Failure
to do so may cause the speaker to fall, resulting in
material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the
bracket has no loose joints after installation to
prevent accidents that could result in personal
injury.
• Use only the specified mounting brackets. Doing
otherwise may cause the unit or component to fall
off, resulting in personal injury.
• Do not mount the unit in locations exposed to
constant vibration. The mounting bracket can be
damaged by excessive vibration, potentially
causing the unit to fall, which could result in
personal injury.
3
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
WARNING
CAUTION

Specyfikacje produktu

Marka: TOA
Kategoria: głośnik
Model: SR-A18B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TOA SR-A18B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik TOA

TOA

TOA PC-391T Instrukcja

9 Października 2024
TOA

TOA PC-391 Instrukcja

9 Października 2024
TOA

TOA PC-1860EN Instrukcja

9 Października 2024
TOA

TOA PC-2360EN Instrukcja

9 Października 2024
TOA

TOA F-1300W Instrukcja

9 Października 2024
TOA

TOA PC-3WR Instrukcja

9 Października 2024
TOA

TOA TZ-205 Instrukcja

9 Października 2024
TOA

TOA PC-2668 Instrukcja

9 Października 2024
TOA

TOA PC-3WR-L Instrukcja

9 Października 2024
TOA

TOA BS-1120W Instrukcja

9 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024