Instrukcja obsługi TOA HY-PF1

TOA głośnik HY-PF1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA HY-PF1 (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
TOA's HY-PF1B, HY-PF1W, and HY-PF1WP are used exclusively to suspend the HX-5 speaker system from the high
ceiling.
Both the HY-PF1B and HY-PF1W are designed for indoor use, while the HY-PF1WP is designed for outdoor use.
The FB-120 series Subwoofer can be suspended using the HY-PF1B or HY-PF1W and the frame's supplied mounting
brackets.
HY-PF1B
HY-PF1W
HY-PF1WP
SPEAKER RIGGING FRAMES
INSTALLATION MANUAL
1. SAFETY PRECAUTIONS
•Before installation or use, be sure to carefully read all the
instructions in this section for correct and safe operation.
•Be sure to follow all the precautionary instructions in this
section, which contain important warnings and/or
cautions regarding safety.
•After reading, keep this manual handy for future
reference.
Indicates a potentially hazardous situation which, if
mishandled, could result in death or serious personal
injury.
WARNING
•Refer all installation work to the dealer from whom the
speaker was purchased. Installation for flying requires
extensive technical knowledge and experience. The
speaker may fall off if incorrectly installed, resulting in
possible personal injury.
•Flying Precautions
Be sure to follow the instructions below. Otherwise, the
suspension wires or belts may be off or snap and the
speaker may fall off, causing personal injury.
· Use nuts and bolts that are appropriate for the ceiling's
structure and composition.
· Check to confirm that the suspension wires and belts
are strong enough to withstand the load.
· The connectors of the suspension wires and belts must
be securely linked with those of the load.
· All parts and components (such as enclosures, metal
pieces, and screws) must be free from any
deformation, crack, and corrosion.
· Be sure to use screws supplied with the optional flying
hardware when installing the speaker using such
hardware.
•Install the unit only in a location that can structurally
support the weight of the unit and the speaker. Doing
otherwise may result in the speaker falling down and
causing personal injury and/or property damage.
• (HY-PF1B and HY-PF1W only)
Since the unit is designed for indoor use, do not install it
outdoors. If installed outdoors, the aging of parts causes
the speaker to fall off, resulting in personal injury.
• Owing to the speaker's size and weight, be sure that at
least two persons are available to install the unit. Failure
to do so could result in personal injury.
• Do not use other methods than specified to mount the
unit. Extreme force is applied to the unit and the speaker
could fall off, possibly resulting in personal injuries.
• Tighten each nut and bolt securely. Ensure that the unit
has no loose joints after installation to prevent accidents
that could result in personal injury.
• Use the specified speaker in combination. Doing
otherwise may cause the speaker to fall off, resulting in
personal injury.
• Do not mount the unit in locations exposed to constant
vibration. The unit can be damaged by excessive
vibration, potentially causing the speaker to fall, which
could result in personal injury.
• Avoid installing the speaker in locations close to the
seashore or in indoor swimming facilities that are not well
ventilated. In such locations the bracket may be
vulnerable to corrosion, eventually allowing the speaker
to fall resulting in personal injury.
Indicates a potentially hazardous situation which, if
mishandled, could result in moderate or minor personal injury,
and/or property damage.
CAUTION
•Avoid touching the unit's sharp metal edge to prevent
injury.
•Do not stand or sit on, nor hang down from the unit as
this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
•Have the unit checked periodically by the shop from
where it was purchased. Failure to do so may result in
corrosion or damage to the unit that could cause the unit
to fall, possibly causing personal injury.
2. PRECAUTIONS WHEN INSTALLING
THE HY-PF1WP
Only the HY-PF1WP can be installed outdoors.
•Only the HX-5B-WP and HX-5W-WP speaker systems
can be installed outdoors.
•Install the speakers so that all speaker modules face
downward from the horizontal axis.
Doing otherwise could adversely affect the speaker's
weather resistance and possibly lead to malfunction or
failure.
3. DIMENSIONAL DIAGRAM
Subwoofer fixing bracket
(HY-PF1B and HY-PF1W
only, accessory)
550 (21 21/ )32 512 (20 5/ )32
310 (12 13/ )64
50 (1 31/ )32
Suspension hole
6-25 x 27 (6-63/ x 1 64 1/ )16
Unit: mm (inches)
Note
The holes to use for suspension
differ depending on the way of
speaker suspension.
4. SUSPENSION
4.1. When Suspending Only HX-5 Series Speaker Systems
When suspending only HX-5 series with the HY-PF1 series, use chains, wires, or carabiners.
[Example of HX-5 series vertical suspension]
Rear plate
HY-PF1 series
(suspended at 3 points)
HX-5 series (suspended at 3 points)
Use 3 wires for suspension from the ceiling.
1
2
Suspend the HX-5 series at
the same 3 suspension holes
as in step 1.
Note
If the HX-5 series is suspended
horizontally, change the
orientation of the rear plate.
More particularly, refer to the
instruction manual supplied
with the HX-5 series.
A stack of up to 4 HX-5 series
can be suspended vertically.
Only 1 HX-5 series can be
suspended horizontally.
4.2. When Suspending Only FB-120 Subwoofer
(applicable to the HY-PF1B and HY-PF1W)
Hexagon head bolt M8 x 40
with washer (accessory)
Hexagon head bolt M8 x 40
with washer (accessory)
Subwoofer fixing bracket (accessory)
HY-PF1B or HY-PF1W
Nut for M8
(accessory)
FB-120
Subwoofer
Suspension holes (4-points)
Remove the attached screws.
Note
The removed screws are not used.
2
3
1
Fix the FB-120.
4
Suspend at these 4 points from the ceiling
using chains, wires, or carabiners.
5
Place the subwoofer on the suspension frame.
Attach the fixing brackets at
the 4 positions on the speaker
rigging frame.

Specyfikacje produktu

Marka: TOA
Kategoria: głośnik
Model: HY-PF1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TOA HY-PF1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik TOA

TOA

TOA PC-391T Instrukcja

9 Października 2024
TOA

TOA PC-391 Instrukcja

9 Października 2024
TOA

TOA PC-1860EN Instrukcja

9 Października 2024
TOA

TOA PC-2360EN Instrukcja

9 Października 2024
TOA

TOA F-1300W Instrukcja

9 Października 2024
TOA

TOA PC-3WR Instrukcja

9 Października 2024
TOA

TOA TZ-205 Instrukcja

9 Października 2024
TOA

TOA PC-2668 Instrukcja

9 Października 2024
TOA

TOA PC-3WR-L Instrukcja

9 Października 2024
TOA

TOA BS-1120W Instrukcja

9 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024