Instrukcja obsługi Tefal Easy Pro FR1014

Tefal frytkownica Easy Pro FR1014

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tefal Easy Pro FR1014 (24 stron) w kategorii frytkownica. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

www.t-fal.com

EASY PRO

IMPORTANT SAFEGUARDS

When using fryer, basic safety precautions should always be followed,

including the following:

1. Read all instructions before using.

2. Do not touch hot surfaces. Use handles or knobs.

3. To protect against electric shock, do not immerse cord, plugs or fryer in

water or other liquid.

4. Close supervision is necessary when the fryer is used by or near children.

5. Unplug from outlet when not in use and before cleaning. Allow to cool

before putting on or taking off parts, and before cleaning the fryer.

6. Do not operate the fryer with a damaged cord or plug or after the fryer

malfunctions, or has been damaged in any manner. Return the fryer to the

nearest authorized service facility for examination, repair or adjustment.

7. The use of accessory attachments not recommended by the fryer

manufacturer may cause injuries.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. Extreme caution must be used when moving fryer containing hot oil.

12. Always attach plug to the fryer ﬁrst (depending on model), then plug cord

in the wall outlet.

To disconnect, turn any control to “off”, then remove plug from wall outlet.

13. Do not use the fryer for other than intended use.

14. Be sure handles are properly assembled to basket and locked in place. See

detailed assembly instructions. Ensure the two metallic parts of the basket

handle are correctly positioned before locking the handle on the basket.

15. SAVE THESE INSTRUCTIONS.

FOR HOUSEHOLD USE ONLY.

16. Before use, check that your local voltage corresponds with the speciﬁcations

shown on the appliance nameplate located under the fryer.

17. Only connect the appliance to electrical sockets which have a minimum

load of 15A. If the sockets and the plug on the appliance should prove

incompatible, get a professionally qualiﬁed technician to replace the socket

with a more suitable one.

18. This electrical equipment operates at high temperatures which may cause

burns. Do not touch the ﬁlter, window, metal walls (depending on model), or

other apparent metal parts.

19. To ensure safe operation, oversized foods must not be inserted into the fryer.

20. Ensure that the lid and bowl are completely dry after washing and before use.

21. Never immerse the fryer basket into the hot oil - or drain it - without the fryer

lid in place.

22. The oil level must always be between the Min. and Max. markings.

23. Do not overload the basket. For safety reasons never exceed the maximum

quantity.

24. Never operate your fryer without any oil.

25. The cooking times are given as guidelines only.

26. The oil must be ﬁltered regularly and changed after 8 to 12 uses.

27. Do not mix different types of oil.

28. If you use solid vegetable shortening, cut it into pieces and melt it over low heat

in a separate pot beforehand, then slowly pour it into the deep fryer pot. Never

put solid shortening directly into the deep fryer pot or basket, as this will lead to

deterioration of the fryer.

29. If the fryer has a removable pot, never remove it while the deep fryer is on.

30. This model is equipped with a permanent metallic ﬁlter, which does not need to

be changed.

31. This appliance is not designed to be used by people (including children) with

a physical, sensory or mental impairment, or people without knowledge or

experience, unless they are supervised or given prior instructions concerning the

use of the appliance by someone responsible for their safety.

Children must be supervised to ensure that they do not play with the appliance.

32. Warning: Possible eruption. Waters reaction to hot oil is extremely volatile.

Please ensure, no matter what the recipe states, food must be dried

thoroughly before immersing in Hot oil.

33. If you have any problems, contact the authorized after-sales service center or

the internet address www.t-falusa.com or www.t-fal.ca.

Polarization instructions (USA)

If this appliance has a polarized plug (one blade is wider than the other), it is

to reduce the risk of electric shock.

This plug is intended to ﬁt into a polarized outlet only one way. If the plug

does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact

a qualiﬁed electrician. Do not attempt to modify the plug in any way.

Short Cord instructions

Do not use with an extension cord. A short power supply cord is provided to

reduce the risks resulting from being tangled in, or tripping over, a long cord.

Magnetic connector (USA)

The cord is equipped with a detachable magnetic connector. The magnetic

connector should be attached directly to the fryer. THIS SHOULD BE DONE PRIOR

TO PLUGGING THE CORD INTO THE WALL OUTLET.

Environment protection first!

 Your appliance contains valuable materials which can be recycled.

 When you decide to replace your appliance, leave it at a local civic

waste collection point.

Specyfikacje produktu

Marka:	Tefal
Kategoria:	frytkownica
Model:	Easy Pro FR1014
Rodzaj zasilania:	PoE
Waga produktu:	260 g
Certyfikaty:	CE, FCC
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	0 - 40 °C
Pobór mocy:	9 W
Zakres temperatur (przechowywanie):	-15 - 60 °C
Wymiary produktu (SxGxW):	170 x 80 x 40 mm
Maks. rozdzielczość:	640 x 480 px
System operacyjny:	Windows XP(32/64-bit), Vista (32/64-bit)
Zgodny ze standradami przemysłowymi:	IEEE 802.3u,IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Obsługiwane protokoły sieciowe:	IPV4, ARP, TCP, UDP, ICMP, DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client, HTTP Server, Samba Client, PPPoE, UPnP AV, RTP (Real Time Protocol), RTCP (Real Time Control Protocol), RTSP (Real Time Streaming Protocol)
Typ przetwornika obrazu:	CMOS
Min. Oświetlenie:	0.5 lx
Wielkość czujnika CCD:	1/4 "
Ilość klatek:	30 fps