Instrukcja obsługi TC Electronic SCF Gold


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TC Electronic SCF Gold (9 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/9
SCF GOLD
Reissue SCF Stereo Chorus Flanger Pedal with
3 Modulation Modes, Analog BBD Circuit and Preamp
Quick Start Guide
V 1.0
2SCF GOLD
3 types of stereo eects
The 3 kinds of eects are all stereo, but can be used in mono as well. The eects are suitable
for all electric or electried instruments and will in no way compromise the tonal quality
of the instrument.
Chorus
A chorus is basically a pitch generator which mixes multiple delay signals. When the
multiple delay signals are mixed with the original signal, a soft and wide sounding
modulation eect is created.
Flanger
A anger is based on the same principle as a chorus, although here the signal can be
regenerated (like adding feedback on a delay) creating a more distinctive sounding eect.
Pitch Modulation
A combination of chorus and pitch vibrato which creates a “light” chorus sound.
Real Stereo
When using stereo, the eect signals and the clean signal appear simultaneously in both sides.
The eect signals are alternating phase reversed in left and right sides, creating a unique
spatial dimension.
Introduction SCF GOLD Controls
4SCF GOLD
(1) SPEED – Controls the rate of sweep
in a range from 1 sweep every
10 seconds to 10 sweeps each second
(0.1 – 10 Hz). Slower Speed settings
usually work well with higher
Width settings, and faster speeds
should use lower Width settings.
(2) INTENSITY – The Intensity knob has 3
functions, one for each mode:
In the Chorus mode, it blends
between chorus and clean signal.
In Flanger mode, it controls
the strength of the comb lter
phasing of the signal (like
feedback on a delay).
In Pitch Modulation mode,
it blends chorus with vibrato.
(3) MODE – Switches between the
3 modes of operation: Chorus, Pitch
Modulation (P.M.), and Flanger.
(4) WIDTH – Determines how wide of
a modulation (sweep) is produced.
Ranges are from 0 (no modulation) to
6 (max) on a relative scale.
(5) INPUT GAIN – Controls the gain of
the built-in preamplier. Set fully
counterclockwise for most situations.
(6) OVERLOAD – Indicates when the SCF
is close to being overloaded. Adjust for
occasional peak indication.
(7) INPUT – High impedance input.
Connect your instrument here.
(8) OUTPUT (MONO) – Outputs a
monophonic eect signal, or if both
outputs are used, the left channel of
the stereo signal.
(9) OUTPUT (STEREO) – Outputs the right
channel of the stereo signal.
(10) BYPASS Press to engage or bypass
the pedal.
(11) POWER – Connect a standard
9 V / >150 mA power supply.
(12) LED INDICATORIndicates the sweep
rate (as set by Speed knob) with the
eect on.
SCF GOLD Controls
(EN) Controls


Specyfikacje produktu

Marka: TC Electronic
Kategoria: Niesklasyfikowane
Model: SCF Gold

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TC Electronic SCF Gold, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane TC Electronic

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane