Instrukcja obsługi Tannoy MERCURY VCi

Tannoy głośnik MERCURY VCi

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tannoy MERCURY VCi (12 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

O W NER’ S M A N U A L

02_ MERCURY Vi MANUAL

CONTENTS

WARRANTY 02 CONNECTION V1i, VCi & VRi 04

INTRODUCTION 03 CONNECTION V4i 05

AMPLIFIER CHOICE 03 POSITIONING & FINE TUNING 06

CABLE CHOICE 03 GRILLES 06

UNPACKING 03 CARE OF CABINET 06

V4i FLOOR STANDING MODELS 03 MERCURY Vi HOME THEATRE 5.1 07

V1i, VCi & VRi MODELS 04 TECHNICAL SPECIFICATIONS 08

INSTALLATION 04 SET-UP DIAGRAMS 09-11

WARRANTY

No maintenance of the Mercury Vi loudspeaker is necessary.

As part of the MUSIC Group, Tannoy is committed to providing the highest quality products, service and user experience

for our customers. One element of this commitment is our after sales support which now incorporates our extended

Limited Warranty. In the event of any concern that is not addressed by this extended Limited Warranty we would ask you

to contact us at care@music-group.com

For full warranty details including the extended Limited Warranty, please visit

http://www.music-group.com/warranty.aspx and register your purchase online at www.music-group.com

or www.tannoy.com

MERCURY Vi MANUAL_03

INTRODUCTION

Thank you for selecting Tannoy loudspeakers, developed in the UK by our dedicated team of design engineers. They

are the choice of discriminating music lovers the world over. Musical excellence is designed into our loudspeakers from

the start. Careful selection of the very best components combined with strict quality control procedures in the production

process ensures this level of excellence is maintained.

To gain maximum performance from your loudspeakers, please take time to read this owner’s manual in full before

installation. Once you have set up your new loudspeakers please register them on our website - this does not limit your

legal rights.

Loudspeakers are electromechanical devices that ‘run-in’ through use; performance will therefore improve after an initial

period of 24hrs use. Once they have been further run-in over a longer period, there will be clear enhancement of the

stereo imaging, mid-band quality and bass performance characteristics.

We are condent that you will continue to enjoy your new Tannoy Mercury Vi loudspeakers for many years to come.

AMPLIFIER CHOICE

Consult the product specication pages within this manual as this clearly shows the acceptable power range for amplier

matching to your speakers. The high peak power handling of Tannoy loudspeakers permits responsible use with more

powerful ampliers - please read the Warranty.

As with all loudspeaker systems, the power handling is a function of voice coil thermal capacity. Care should be taken

to avoid overdriving any amplier, as this will cause output overload resulting in ‘clipping’ or distortion within the output

signal. This will cause damage to the speakers if done for any extended period.

Generally an amplier of higher power that is running hard, but free of distortion, will do less damage to the loudspeaker

than a lower power amplier continually clipping. Remember also that a high powered amplier running at less than 90%

of output power generally sounds a great deal better than a lower powered example struggling to achieve 100%. An

amplier with insufcient drive capability will not allow the full performance of the loudspeakers to be realised.

CABLE CHOICE

Always use the best quality of cable available within your budget. High quality audio signals passing from the amplier

to the loudspeaker are unusual in their demands on the cable. Wide dynamic range and frequency bandwidth information

has to coexist with the ability to transmit peak currents of at least 10 amps, without incurring any loss or signal impairment.

This explains why the sound quality of the information reproduced by the loudspeakers is so dependant on the physical

properties of the cables connecting them to the amplier.

We would recommend that you always keep the cable runs the same length for each speaker. Remember that cable

construction can affect the sound quality so be prepared to experiment to nd a cable that suits your ear and audio system.

UNPACKING

To unpack the loudspeakers from their boxes remove tape from the top then fold the aps right back before inverting the

carton and contents. Lift the carton clear of the contents then remove all inner packaging.

It is strongly recommended that you store all the packaging to allow protected transportation in future.

V4i FLOOR STANDING MODEL

The Mercury V4i performs best with carpet piercing spikes tted, together with the plinth assembly provided. Referring to

g. 1, screw the plinth sections securely to the underside of the cabinet, taking care not to over tighten. The spikes with

lock nuts should then be inserted into the threaded holes in the plinth. Level the speakers and then tighten the lock nuts

rmly but without using undue force. Spike locating cups are provided in the accessory pack and these may be used to

protect sensitive oor surfaces. (See g. 1)

WARNING:

Ensure that the spikes are levelled and that the lock nuts are tightened rmly. The spikes should be pushed through the

carpet to locate into the ooring surface by applying pressure to the top of the cabinet.

If using on a sensitive oor surface place the protective cups under the levelled spikes. Failure to do so could render the

speaker unsteady and result in damage or injury should it be knocked over.

Specyfikacje produktu

Marka:	Tannoy
Kategoria:	głośnik
Model:	MERCURY VCi
Kolor produktu:	Czarny
Materiał obudowy:	MDF
Wysokość produktu:	140 mm
Szerokość produktu:	430 mm
Głębokość produktu:	170 mm
Waga produktu:	4900 g
Rekomendowane użycie:	Zestaw głośnikowy jednostka
Technologia łączności:	Przewodowa
Impedancja:	8 Ω
Moc wyjściowa (RMS):	70 W
Kanały wyjścia audio:	1.0 kan.
Zasięg częstotliwości:	67 - 53000 Hz
Rozmieszczenie głośników:	Plansza/półka
Ilość przetworników:	3
Głośnik wysokotonowy:	Tak
Głośnik niskotonowy:	Tak
Wzmacniacz:	Nie
Czułość:	90 dB
Ustawienia korektora:	Nie
Złącze banan:	2
Moc szczytowa (PMPO):	140 W
Typ głośnika:	2-drożny
Przystosowane do użytku na zewnątrz:	Nie
Liczba głośników wysokotonowych:	1
Liczba głośników niskotonowych:	2
Średnica głośnika wysokotonowego:	1 "
Średnica głośnika niskotonowego (imperial):	4 "
Średnica głośnika niskotonowego:	100 mm