Instrukcja obsługi Swann SWNVK-460KH2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Swann SWNVK-460KH2 (36 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/36
Welcome to the Setup Wizard! The Setup Wizard automatically runs the first time you start your NVR and will guide you through all the important
settings you need to get up and working. Please be patient as it can take a moment for the wizard to appear after turning on your NVR.
QW460200814E | © Swann 2014
The Setup Wizard EN
Change Wi-Fi settings
Choose a language
Select a video standard
Select a time zone
Change display resolution
Adjust the system time and
date
Select settings for Daylight
Savings
Configure an email account
for alert notifications
Create a new security code
for the NVR
This quick start guide gives you the choice of configuring
your NVR to run in AP” mode or Station” mode. AP” is the
default mode of operation and the recommended method of
configuration. In this mode the included cameras communicate di-
rectly with the NVR with no configuration required, however a cable
connection to your router is required for Internet access. In “Sta-
tion” mode the NVR and cameras connect to your Wi-Fi network.
This gives you the freedom of placing the NVR in different locations
without being tethered to your router. Wi-Fi booster devices can
also be used to extend the overall coverage allowing you to mount
the cameras that were once outside the range of the NVR.
During the wizard you will:
1
4
Please follow the instructions in the “Getting to know your NVR (blue
colour)” quick start guide before commencing the Setup Wizard.
Before proceeding to the Setup Wizard, you need to enable each check-
box for the equipment required. It’s recommended to have the NVR and
cameras close by during setup before doing a permanent installation.
AP Mode - If you would like to setup your NVR in this mode follow the
instructions on page 3. Please make sure the NVR is connected to your
router using the provided Ethernet cable and that each camera is con-
nected to the power adapter using the provided power splitter.
Station Mode - To setup in this mode follow the instructions on page 4.
Please make sure the NVR is connected to your router using the pro-
vided Ethernet cable. There is an additional Ethernet cable to connect
one of the cameras to your router. If you have additional Ethernet cables
on hand, use these to connect each camera to your router. Make sure
that each camera is connected to the power adapter using the provided
power splitter.
Click “Proceed” to continue.
2
Introduction 1


Specyfikacje produktu

Marka: Swann
Kategoria: Kamera monitorująca
Model: SWNVK-460KH2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Swann SWNVK-460KH2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca Swann

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca