Instrukcja obsługi Swann PRO-870

Swann Kamera monitorująca PRO-870

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Swann PRO-870 (18 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/18
1
Professional
All-Purpose Security
Camera
INSTRUCTION MANUAL
EN
MLFBCAM150514T
2
ENGLISH
Congratulations on your purchase of this PRO-CAM from Swann! You’ve chosen well: we
think this is one of the finest CCTV video cameras available. The PRO-CAM is great for
monitoring a specific area and is able to provide a high level of detail, even at night - it can
see up to 35m/115ft in the dark.
Placement Guide
The PRO-CAM has a 6mm, 45° lens built-in which
allows it to focus its attention onto one specific area.
What does this mean for you when placing it?
• The camera will focus on the one particular
area in front of the lens, but won’t see much
happening to the sides of it. You’ll need to aim
the camera specifically at what you want to see.
• Objects and people will look like they are slightly
closer to the camera than they really are. You’ll
be able to monitor a space which is as long (or
longer) than it is wide.
The PRO-CAM is great for monitoring long, narrow
spaces such as hallways or corridors. It’s also great
for monitoring a specific space, such as a doorway,
smaller room or staircase.
Typically, it is best mounted in a corner looking across and down into the room, so that it
can look over intervening obstacles. The higher the ceiling the camera is mounted on, the
more it will be able to see and the harder it’ll be for an intruder to access the camera or
interfere with it.
Tips: Positioning and Orienting
• Try to aim the camera at an area which is evenly lit, as objects or people in shadows
near brightly lit objects are very hard to see.
• It’s better to have the camera in the shade looking into the light than vice-versa.
• Avoid having bright light sources in your image. This includes the obvious (such as the
sun or an artificial light source) but also things such as reflections. Cars are notorious
for reflected light sources, as are buildings with a lot of windows, mirrors and so forth.
About the Camera
45°
10m
33ft
8.3m
27ft
3
ENGLISH
The camera mounts onto a flat surface using screws. The surface must have sufficient
strength to hold the camera. Materials such as hardwood, brick or masonry are good
options, and we’ve included all the gear you’ll need to mount it there (except the tools -
sorry, you’ll still need your own drill). You can mount the camera onto a metal surface, but
you’ll need to supply your own mounting hardware.
To mount the camera:
• Using the holes on the camera stand as a guide, mark the locations on your wall to
drill. Make sure the wall is thick and strong enough that you won’t drill through it.
• If the wall is masonry, brickwork or similar, use the provided wall plugs. If the wall is
made of wood, then the camera can be screwed directly onto the wall.
• Ensure that the cable is protected from the weather. The camera is weatherproof, but
the cable (particularly the power and video-out plugs) is not.
• Once the camera has been mounted, ensure that it is securely fixed in place. The camera
is vandal resistant, but that won’t help if an intruder can remove the whole camera!
Tips: Positioning your Cables
• When running your cable, try to avoid bending it at sharp angles.
• Don’t put your cable near live electrical wiring. AC electricity generates radio “noise”
which can interfere with the signal from your camera.
Tips: Weather Resistance
• The PRO-CAM is built to be weather resistant. It’ll stand up to getting wet occasionally,
but it’s not intended to be underwater all the time. When mounting the camera, ensure
that it’s not in a location where water is likely to pool or build up over time.
• Long term exposure to direct sunlight will adversely affect the camera. Over time, the
infrared and ultraviolet radiation will eventually begin to degrade the integrity of the
plastic and rubber components of the camera (particularly the seals, cable, protectors
and so on). Basically, put it in the shade!
• The camera itself is weather resistant, but the cables (most importantly the plugs)
are not. Ensure that all wiring and the connectors are suitably insulated and protected
from moisture and sunlight.
Tips: Night Vision
• Don’t place the camera so that there are any objects near the lens. Even transparent
or seemingly inconsequential objects (such as glass or spider’s webs) will reflect
infrared light, and effectively blind the camera at night.
Mounting the Camera

Specyfikacje produktu

Marka: Swann
Kategoria: Kamera monitorująca
Model: PRO-870

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Swann PRO-870, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca Swann

Swann

Swann SWNHD-866MSD Instrukcja

2 Października 2024
Swann

Swann Pro DVR8-4000 Instrukcja

28 Września 2024
Swann

Swann DVR4-1000 Instrukcja

22 Września 2024
Swann

Swann Enforcer SWPRO-4KMQB Instrukcja

19 Września 2024
Swann

Swann SW312-HMD-CA Instrukcja

16 Września 2024
Swann

Swann PRO-A851 Instrukcja

15 Września 2024
Swann

Swann SWIFI-PTCAM232GB Instrukcja

12 Września 2024
Swann

Swann AllSecure650 SWNVK-650KH4 Instrukcja

12 Września 2024
Swann

Swann PrivateEye ADS-45 Instrukcja

9 Września 2024
Swann

Swann SW331-PR5 Instrukcja

9 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025
Toshiba

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025
AVerMedia

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025
Digitus

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025
Speco Technologies

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025
ZKTeco

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025