Instrukcja obsługi Swann NHD-880

Swann Kamera monitorujÄ…ca NHD-880

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Swann NHD-880 (3 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
5 6
Limited Warranty - Terms & Conditions
Swann Communications warrants this product
against defects in workmanship and material for
a period of one (1) year from its original purchase
date. You must present your receipt as proof of
purchase for warranty validation. Any unit which
proves defective during the stated period will
be repaired without charge for parts or labour
or replaced at the sole discretion of Swann. The
end user is responsible for all freight charges in-
curred to send the product to Swann’s repair cen-
tres. The end user is responsible for all shipping
costs incurred when shipping from and to any
country other than the country of origin.
The warranty does not cover any incidental, ac-
cidental or consequential damages arising from
the use of or the inability to use this product. Any
costs associated with the fitting or removal of this
product by a tradesman or other person or any
other costs associated with its use are the re-
sponsibility of the end user. This warranty applies
to the original purchaser of the product only and
is not transferable to any third party. Unauthor-
ized end user or third party modifications to any
component will render all warranties void. By law
some countries do not allow limitations on certain
exclusions in this warranty. Where applicable by
local laws, regulations and legal rights will take
precedence.
For Australia: Our goods come with guarantees
which cannot be excluded under Australian Con-
sumer Law. You are entitled to a replacement
or refund for a major failure and for compensa-
tion for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of ac-
ceptable quality.
M850880CAMVER1E
FCC Verification
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) These devices may not cause harmful interference.
(2) These devices must accept any interference received, including interference that may cause
undesired operation.
Ultra HD
Security Camera
5MP and 4K HD Bullet Camera for
Ultra HD Network Video Recorders
EN INSTRUCTION MANUAL
Helpdesk/Technical Support
tech@swann.com
support.swann.com
USA & Canada 1800 627 2799
Australia 1800 788 210
New Zealand 0800 479 266
UK 0808 168 9031
Security Made Smarter
© Swann Communications 2017
1 2 3 4
Congratulations on your purchase of this Swann
Ultra HD Network Video Camera. You’ve made
a fine choice for keeping a watchful eye over
your home or business. The camera delivers
brilliant and amazingly clear high definition
images and videos in both day and nighttime
conditions even in complete darkness. Designed
in an elegant, unobtrusive weatherproof casing
with an integrated 3-axis mounting bracket,
the camera is versatile enough to be installed
on walls and ceilings - indoors or outdoors and
will be an excellent addition to your Swann NVR
monitoring solution.
Note: This manual covers both the 5MP and 4K
camera models.
Important note - All jurisdictions have specific
laws and regulations relating to the use of
cameras. Before using an y camera for any
purpose, it is the buyer’s responsibility to be
aware of all applicable laws and regulations that
prohibit or limit the use of cameras.
Important safety instructions
1) Make sure the camera is fixed correctly and
stable if fastened in place.
2) Do not operate if wires and terminals are
exposed.
3) Never place strain of any kind on the network
cable connection. It’s designed to clip into place to
prevent slippage, but it won’t support any weight
and can be easily broken by a sharp tug. Exercise
caution.
Warning - Modifications not approved by the party
responsible for compliance could void user’s
authority to operate the equipment.
Introduction Connecting your Camera
Some things to consider when choosing a location -
1) What you want to monitor and where you’ll get the
best view of it.
2) How you’re going to connect the camera to your
monitoring system; remember that ca bles and
connections shou ld be kept out of the weather.
3) It’s recommended to mount your camera at an
elevated position to minimise harm.
4) Place your camera as close to the area of interest
as practicable. The best position is from about 4m
(13ft) above looking slightly down, keeping in mind
the details you are looking for.
5) Although the sky looks nice when you look at the
live view from your camera, it is an unlikely direction
for an offender to approach, make sure your camera
has minimal sky in it as the light in daylight can make
the foreground of the image darker.
6) Think about the most likely way a potential offender
may approach your home, use your cameras to give
you the best coverage of these areas.
7) The camera’s casing is resistant to water, different
weather conditions and tampering. It would take
an overwhelming event of this kind to damage the
housing of the camera. However, the cable and
connector are vulnerable and require protection.
8) Even though the camera is weather and water-
resistant, prolonged exposure to adverse weather
conditions such as sunlight or excessive moisture,
may eventually damage the internal components of
the camera and adversely affect its performance.
9) Avoid bending your cables at sharp angles.
10) If you install the camera outside of your home,
we highly recommend using waterproof tape
to wrap the cable connection area between the
camera’s network (LAN) port and the extension
cable’s Ethernet plug, as shown below. Use as
much as is necessary for the layer of tape to
protect the connection. This will help prevent
water or moistuire from leaking into the cable
which can cause the network cable connection to
degrade over time or stop working.
Mounting your Camera Camera Location Tips
To connect your camera to the NVR, simply connect the supplied Ethernet cable to the LAN connection on
the camera then plug the other end of the cable into one of the IP camera inputs on the back of the NVR.
The Ethernet cable is the same at both ends so it doesn’t matter which end plugs into the camera or the NVR.
Note: The DC Power connector is provided as an alternative power option if required. The NVR will provide PoE
power over the network cable when connected as described above and in this case the DC Power is not needed.
The camera can be mounted onto a flat surface using screws. The surface must have sufficient
strength to hold the camera.
• Position the camera in the location you want to mount it, and
mark the screw holes on the surface to position the screws.
Then, using appropriate screws for the surface you’re fixing the
camera to, secure the camera into place.
• If you’re mounting to a wooden surface, then screw the camera
directly to the surface.
• If you’re mounting to a masonry surface (bricks, concrete or
similar), then you’ll need to use wall plugs.
Adjusting the camera angle
• Loosening the locking ring will allow you to pan, tilt and rotate
the camera.
• Remember to tighten the locking ring back securely to lock the
camera’s position in place after you’ve finished adjusting the
viewing angle of the camera.
4321
9 10 11 12
5 6 7 8
16151413 AUDIO OUT
AUDIO IN
VGA
LAN
POE
Ethernet cable
LAN
DC Power
Camera
Unscrew the compartment
lid underneath the camera
body using the supplied tool
to access the Reset button if
required.

Specyfikacje produktu

Marka: Swann
Kategoria: Kamera monitorujÄ…ca
Model: NHD-880

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Swann NHD-880, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorujÄ…ca Swann

Swann

Swann SWNHD-866MSD Instrukcja

2 Października 2024
Swann

Swann Pro DVR8-4000 Instrukcja

28 Września 2024
Swann

Swann DVR4-1000 Instrukcja

22 Września 2024
Swann

Swann Enforcer SWPRO-4KMQB Instrukcja

19 Września 2024
Swann

Swann SW312-HMD-CA Instrukcja

16 Września 2024
Swann

Swann PRO-A851 Instrukcja

15 Września 2024
Swann

Swann SWIFI-PTCAM232GB Instrukcja

12 Września 2024
Swann

Swann AllSecure650 SWNVK-650KH4 Instrukcja

12 Września 2024
Swann

Swann PrivateEye ADS-45 Instrukcja

9 Września 2024
Swann

Swann SWNVK-887802B2FB Instrukcja

6 Września 2024

Instrukcje Kamera monitorujÄ…ca

Najnowsze instrukcje dla Kamera monitorujÄ…ca

Trebs

Trebs CCD-401C Instrukcja

15 Października 2024
Hikvision

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024
D-Link

D-Link DCS-7510 Instrukcja

15 Października 2024
Ubiquiti Networks

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024
Hikvision

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024
Alecto

Alecto DVC-215IP Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024