Instrukcja obsługi Swann ADS-466

Swann Kamera monitorująca ADS-466

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Swann ADS-466 (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

123

456

789

CConnecting the Camera DNetwork LAN Connection (optional)

QSH_466CAM200214E | © Swann 2014

AGetting to know your Camera EN

Congratulations on the purchase of your SwannCloud camera. This quick start guide will assist you on

getting your camera up and running as soon as possible. We recommend that you connect everything and

give it a try before you do a permanent installation, to make sure nothing was damaged during shipping.

A) IR (Infrared) LEDs -

The camera will use

these in low-light conditions to generate

a black and white image, even in total

darkness.

B) Light Sensor - Detects the amount of

light available and turns on the IR LEDs

when necessary.

C) Locking Ring - Loosening the locking

ring will allow you to rotate the barrel of

the camera, so no matter what direction it

faces, you can spin the camera so that your

images are correctly oriented.

A) Power Socket - Connect the power

adapter here.

B) RJ45 (Ethernet) - For a wired connection,

connect this to a spare port on your router.

C) Alarm I/O Block -

For connecting external

alarms and sensors.

A) Wi-Fi Antenna - The included Wi-Fi

antenna connects here.

B) Reset -

When pressed and held for

more than 10 seconds when the power is

disconnected and reconnected, all settings

will revert to the factory defaults.

C) Microphone - Located at the bottom, it

allows the camera to hear nearby sounds

and stream them with the video.

BAccessing the Micro-SD Card slot

To remove the protective cover,

use a Phillips-head screwdriver to

unscrew the screw located at the top

of the camera.

Even though this camera primarily connects to your home network wirelessly, it can also connect to

your router using the supplied LAN cable. The main advantage of a LAN connection is that you don’t get

disconnections or dropouts as you would with a wireless connection.

Remove each rubber cap and unscrew

to gain access to the Micro-SD Card slot.

There are three in total.

Gently pull the camera apart to reveal

the Micro-SD Card slot.

Inserting a

Micro-SD card allows you to capture

a series of snapshots and video files

directly to the card, as well as setting

an alarm schedule so it records

when it has detected motion. This

is optional and is recommended for

advanced users only.

First thing to do is to screw the provided

Wi-Fi antenna into the antenna socket

located on the camera. Use a clockwise

motion to connect. It is recommended

to leave the antenna in a vertical

position for best reception.

Now connect the

supplied power adapter

to the power input on

the camera.

US B In te rne t Et her ne t

432

10 11 12

13 14 15

16 17 18

QSCLOUD150113E | © Swann 2014

BUsing SwannCloud

Wow, that was easy! Start getting yourself familiar with the controls and impress your family and

friends. A description of the various buttons and functions can be found below.

1. SwannCloud will always dis-

play the last two events that

have occurred on the home

screen.

2. This displays how many

events have occurred in total

and for the day. Events occur

whenever motion or an intru-

sion has occurred. Tap this to

go to events.

3. This displays the amount of

cameras that have been reg-

istered to your account. It also

displays if a camera is offline.

Tap this to go to the camera list.

4. Tap this to go to the home

screen.

5. Tap this to access the event

screen. Each event is recorded

as a 10 second video file.

6. Tap this to access the cam-

era list. Tap a camera to view a

live stream.

7. Tap this to access your pro-

file, to log out of the app, to ac-

cess the user manual and to

contact Swann Help Desk.

The PTZ function requires a PTZ camera to be connected.

Use the volume buttons on your mobile device to increase or de-

crease the volume level.

To view a full image of the video

stream, tilt your mobile device hori-

zontally.

CViewing your Camera

To view a live stream from your cam-

era, tap the “Camera” button then tap

the name of the camera.

1. Tap this to enter camera settings.

This will be covered in greater detail

in the user manual that is available on

our web site (www.swann.com.au).

2. Tap this to turn night vision on or off

or to leave it on auto.

3. Tap this to control a pan & tilt camera

(only available on the ADS-446 model).

4. Tap this to take a snapshot of the live

video stream. Snapshots are stored lo-

cally on your mobile device.

EViewing Events

To playback an event full screen, tilt your mobile

device horizontally. Events that haven’t been played

will be displayed in bold on the events list.

To view an event that has occurred,

tap the “Event” button. All events that

have occurred to date will appear.

Scroll up or down to find the event that

you would like to play. When you have

selected an event, it will automatically

play. To select a different event tap the

“Home” button then tap the “Event”

button again.

1. Tap this to pause playback. Tap again

to resume playback.

2. Tap to mark this particular event.

Marking an event will prevent it from

being deleted. A red pin icon will ap-

pear on events that are marked.

3. Tap this to delete the event.

4. Tap this to share the event with oth-

er apps on your device, e.g. email or

saving to a new location.

5. Tap this to view a live stream from

the camera.

The event icons represent

the type of event that has

occurred.

Each event that occurs is

10 seconds long. This is the

maximum length.

Status Icons

This icon repre-

sents that an in-

trusion has oc-

curred.

This icon rep-

resents motion

detected by the

PIR sensor.

This icon repre-

sents someone

has tampered

with the camera.

This icon repre-

sents that facial

detection has

occurred.

This icon repre-

sents an alarm

event has oc-

curred.

This icon repre-

sents that the

camera is of-

fline.

This icon repre-

sents that mo-

tion detection

has occurred.

My Account

Tap “More” to access your pro-

file. You can update your account

name, change password or logout

of the app. You can also access the

user manual and contact Swann

Help Desk.

This pin icon

will appear on

events that have

been marked.

DCamera Settings

1. Tap this to give the camera a

relevant name.

2. Tap this to check if there is an

update available. When you start

the app, you will be notified if an

update is available.

3. Motion detection will be ena-

bled by default.

4. Slide this to the ON position to

enable intrusion detection.

5. Slide this to the ON position to

enable camera tampering.

6. Slide this to the ON position to

enable face detection.

7. Tap this to change settings for

sensitivity, to change the motion

detection area, and to set the in-

trusion direction.

8. Tap this to enable the PIR sen-

sor on the camera.

9. Slide this to the ON position if

you are connecting an alarm to

the camera.

10. Slide this to the ON position

if you would like the app to alert

you if the camera is no longer be-

ing detected.

11. Tap this to change video set-

tings for live view. Adjusting the

frame rate and bit rate may help

if you’re having problems when

viewing a live stream.

12. Tap this to adjust brightness,

contrast, sharpness and satura-

tion.

Please have a look at the user

manual for more information.

123

Tap “Create Account” to cre-

ate a new account.

Input your first name, sur-

name and email address. Tap

“Create” to send a temporary

password to your email ad-

dress.

Input the temporary pass-

word (which is case sensi-

tive), input a new password

and again to confirm, then

tap “Done”.

After a short moment, your

account will be created.

456

Check your email, you should

have received your tempo-

rary password.

Make sure that your mobile

device is connected to the

same Wi-Fi network that your

camera will be connected to.

Tap “Camera” then tap “+” to

add your camera.

Input the password for your

Wi-Fi network then tap “Con-

tinue”. A QR code will appear,

this contains all the network

settings.

Hold your mobile device 4” to

6” (100mm to 150mm) in front

of the camera lens to scan

the QR code. The IR LEDs will

flash twice to confirm the QR

code has been scanned suc-

cessfully.

789

Select how you would like to

have the camera connect-

ed. If you select “Wired”, you

will be taken directly to the

QR code (step 9). If you se-

lect “Wireless” or “Both”, you

will be requested to input the

password for your Wi-Fi net-

work. Tap “Continue”.

Have a Smartphone or Tablet? With the free SwannCloud app, you can turn your iOS or Android

mobile device into a monitoring centre for your camera. Have the peace of mind that you can mon-

itor your home at any time from any place. With “SwannLink” Peer to Peer technology, connecting

your mobile device to your camera is so easy - there’s no need to fiddle around with complicated

network configurations. Best of all, it only takes minutes to get it up and running!

To download the SwannCloud app, go to your relevant app

store and type in the following - “SwannCloud” for Handsets

and Tablets. Follow the on-screen instructions for installa-

tion and accept any license requirements that may appear.

The SwannCloud Mobile App EN

After downloading and installing SwannCloud

onto your Handset or Tablet, locate the app

and tap the icon to run.

The screenshots used on this page are

from the Android version of SwannCloud. The

functions, buttons and overall look and feel

are identical for the iOS version. The app is

continually being tweaked and improved, so

the following screenshots may differ slightly.

Specyfikacje produktu

Marka:	Swann
Kategoria:	Kamera monitorująca
Model:	ADS-466

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Swann ADS-466, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca Swann

Swann SWNHD-866MSD Instrukcja

2 Października 2024

Swann Pro DVR8-4000 Instrukcja

28 Września 2024

Swann DVR4-1000 Instrukcja

22 Września 2024

Swann Enforcer SWPRO-4KMQB Instrukcja

19 Września 2024

Swann SW312-HMD-CA Instrukcja

16 Września 2024

Swann PRO-A851 Instrukcja

15 Września 2024

Swann SWIFI-PTCAM232GB Instrukcja

12 Września 2024

Swann AllSecure650 SWNVK-650KH4 Instrukcja

12 Września 2024

Swann PrivateEye ADS-45 Instrukcja

9 Września 2024

Swann SW331-PR5 Instrukcja

9 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025