Instrukcja obsługi Supermicro X8DTT-HIBXF

Supermicro płyta główna X8DTT-HIBXF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro X8DTT-HIBXF (91 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/91

X8DTT-H

X8DTT-HF

X8DTT-HIBX

X8DTT-HIBXF

X8DTT-HIBQ

X8DTT-HIBQF

USER’S MANUAL

Revision 1.0

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0

Release Date: July 24, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and knowledgeable PC

users. It provides information for the installation and use of the X8DTT-H

Series motherboard.

About This Motherboard

The X8DTT-H Series motherboards support the Intel 5500 Series Proces-

sor platform and the QuickPath Interconnect (QPI) Technology, providing the next

generation point-to-point system interface, replacing the current Front Side Bus.

With the 5500 Series Processor built in, the X8DTT-H/-HF/-HIBX/-HIBXF/-HIBXQ/-

HIBQF offers substantial enhancement in system performance with increased

bandwidth and unprecedented scalability optimized for HPC/Cluster, high-end serv-

ers and intensive application platforms. Please refer to our web site (http://www.

supermicro.com/products/) for updates on supported processors. This product is

intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A lists BIOS POST Error Codes.

Appendix B Appendix C and provide the Windows OS and Other Software Instal-

lation Instructions.

iii

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	płyta główna
Model:	X8DTT-HIBXF
Szerokość produktu:	422.6 mm
Głębokość produktu:	172.7 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Przeznaczenie:	Serwer
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Liczba portów USB 2.0:	4
Przewodowa sieć LAN:	Tak
Producent procesora:	Intel
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Bez kody korekcyjnego:	Tak
Obsługiwane prędkości zegara pamięci:	800,1066,1333 MHz
Gniazdo procesora:	Socket B (LGA 1366)
Układ płyty głównej:	Intel® 5520
Poziomy raid:	0, 1,5, 10
Typ BIOS:	AMI
PCI Express x16 gniazda:	1
Ilość gniazd USB 2.0:	4
Liczba portów PS/2:	1
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	32 Mbit
Wersja ACPI:	3.0
Model karty graficznej on-board:	Matrox G200eW
Wersja gniazd typu Slot (PCI Express):	2.0
Intel® Xeon series:	E5500, E5600, L5500, L5600, X5500, X5600
Ilość slotów DIMM:	12
Liczba obsługiwanych procesorów:	2
Prędkość zegara pamięci RDIMM:	800,1066,1333 MHz
Maksymalna pojemność pamięci RDIMM:	192 GB
Maksymalna pojemność pamięci UDIMM:	48 GB
Obsługuje rozmiary DIMM:	16GB, 1GB, 2GB, 4GB, 8GB
Obsługa IPMI:	Tak
Port IPMI LAN (RJ-45):	Tak
Obsługiwana pojemność modułu DIMM:	16GB, 1GB, 2GB, 4GB, 8GB
Obsługiwana pojemność modułu RDIMM:	16GB, 1GB, 2GB, 4GB, 8GB
Obsługiwane QPI:	6.4 GT/s