Instrukcja obsługi Supermicro X7DAL-E+

Supermicro płyta główna X7DAL-E+

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro X7DAL-E+ (6 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

X7DAL-E+

USER’S MANUAL

Revision 1.1

Manual Revision: Rev. 1.1

Release Date: August 13, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more of

the following measures:

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment and the receiver.

*Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

*Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of

the X7DAL-E+ motherboard. The X7DAL-E+ supports dual

Intel Quad-Core and Dual-Core processors with a front side bus speed of 1.333

GHz/1.066 GHz/667 MHz. With two 64-bit Quad-Core and Dual-Core processors

built-in, the X7DAL-E+ offers substantial functionality enhancements to the mother-

boards based on the Intel Core Microarchitecture cores while remaining compatible

with the IA-32 software. The features include Intel Hyper-Threading Technology,

Virtualization Technology, Hyper Pipelined Technology, Execution Trace Cache,

Thermal Monitor 1/2 (TM1/TM2), Enhanced Intel SpeedStep technology, Advanced

Dynamic Execution, Advanced Transfer Cache, Streaming SIMD Extensions 3

(SSE3) and Extended Memory 64 Technology (EM64T). These features allow the

motherboard to operate at much higher speeds with better power management in

much safer thermal environments than the traditional motherboards. The X7DAL-E+

is ideal for high performance quad-processor or dual-processor (DP) workstation

and enterprise server environments. Please refer to our web site (http://www.super-

micro.com/products/) for updates on supported processors. This product is intended

to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A lists BIOS Error Beep Codes.

Appendix B and Appendix C provide the Windows OS and other software instal-

lation instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Important information given to prevent faulty installation and to avoid

damage to the motherboard and the components

Note: Additional Information given to ensure proper component installation and cor-

rect system setup

iii

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	płyta główna
Model:	X7DAL-E+
Rodzaj zasilania:	ATX
Wielkość pamięci flash:	8 MB
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Liczba portów USB 2.0:	4
Producent procesora:	Intel
Liczba gniazd pamięci:	6
Bez kody korekcyjnego:	Nie
Obsługiwane pojemności modułów pamięci:	1GB, 256MB, 2GB, 4GB, 512MB
Maksymalna pojemność pamięci:	24 GB
Gniazdo procesora:	LGA 771 (Socket J)
Rodzaj płyty:	ATX
Układ płyty głównej:	Intel® 5000X
Poziomy raid:	0, 1,10
PCI Express x16 gniazda:	1
Ilość gniazd USB 2.0:	2
Liczba portów PS/2:	2
Wymiary produktu (SxGxW):	254 x 305 x 1 mm
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Szeregowe porty komunikacyjne:	1
Napięcie pamięci:	1.8 V
Ilość gniazd SATA:	6
Gniazdo stacji dyskietek:	Tak
PCI Express x4 slots:	1
Port S/PDIF:	Nie