Instrukcja obsługi Supermicro X11SAE

Supermicro płyta główna X11SAE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro X11SAE (131 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/131

X11SAE

X11SAE-F

USER’S MANUAL

Revision 1.0b

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes

no commitment to update or to keep current the information in this manual, or to notify any person

or organization of the updates. Please Note: For the most up-to-date version of this manual,

please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product de-

scribed in this manual at any time and without notice. This product, including software and documenta-

tion, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or

reproduction of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDEN-

TAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY

TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the authorized dealer or an experienced radio/TV technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-

special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used

in this product may expose you to lead, a chemi-

cal known to the State of California to cause birth

defects and other reproductive harm.

Manual Revision 1.0b

Release Date: November 15, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and

use of the X11SAE/X11SAE-F motherboard.

Manual Organization

Chapter 1 describes the features, specications and performance of

the motherboard, and provides detailed information on the Intel C236

Express chipset.

Chapter 2 provides hardware installation instructions. Read this chap-

ter when installing the processor, memory modules and other hardware

components into the system.

If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the

CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed

information on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C contains UEFI BIOS Recovery instructions.

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	płyta główna
Model:	X11SAE
Szerokość produktu:	304.8 mm
Głębokość produktu:	243.8 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Przeznaczenie:	Stanowisko
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	0 - 50 °C
Wi-Fi:	Nie
Kod zharmonizowanego systemu (HS):	84733020
Kanały wyjścia audio:	7.1 kan.
Liczba portów USB 2.0:	2
Przewodowa sieć LAN:	Tak
Usługa RAID:	Tak
Producent procesora:	Intel
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	2
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Bez kody korekcyjnego:	Tak
Obsługiwane prędkości zegara pamięci:	1600,1866,2133,2400 MHz
Maksymalna pojemność pamięci:	64 GB
Gniazdo procesora:	LGA 1151 (Socket H4)
Procesor:	Intel Core i3, Intel Core i5, Intel Core i7
Rodzaj płyty:	ATX
Układ płyty głównej:	Intel® C236
Poziomy raid:	0, 1,5, 10
Typ BIOS:	UEFI AMI
Liczba gniazd M.2 (M):	1
Gniazdo zasilania ATX (24-pin):	Tak
Ilość złączy SATA III:	8
Ilość gniazd USB 2.0:	6
Łącza USB 3.2 Gen 1 (3.1 Gen 1):	4
Ilość gniazd w podstawie wentylatora:	5
Złącze TPM:	Tak
Gniazdo na obudowie:	Tak
Ilość portów DVI-D:	1
Ilość portów USB 3.2 Gen 2 (3.1 Gen 2) Typu-C:	2
Ilość portów HDMI:	1
Układ audio:	Realtek ALC888S
Pamięć niebuforowana:	Tak
Gniazda PCI Express x16 (Gen 3.x):	2
Wspierane interfejsy dysków twardych:	SATA III
Ilość DisplayPort:	1
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Kontroler LAN:	Intel I210-AT, Intel I219LM
Dołączone oprogramowanie:	AMT, SuperDoctor 5, vPro
Obsługa funkcji Plug & Play:	Tak
Port DVI:	Tak
Korekcja ECC:	Tak
Monitorowanie stanu komputera:	FAN, LED, Power supply, Temperature, Voltage
Wersja ACPI:	5.0
Wersja interfejsu zarządzania pulpitem (DMI):	2.3
Wersja systemu BIOS (SMBIOS):	3.0
Gniazda PCI Express x1 (Gen 3.x):	3
Termiczny układ zasilania (TDP):	95 W
Moduł TPM (Trusted Platform Module):	Tak
Napięcie pamięci:	1.2 V
Intel® Xeon series:	E3-1200
Ilość slotów DIMM:	4
Liczba obsługiwanych procesorów:	1
Ilość gniazd COM:	2
Prędkość zegara pamięci UDIMM:	1600,1866,2133,2400 MHz
Obsługiwana liczba rdzeni procesora:	4
Funkcja watchdog:	Tak
Obsługiwana pojemność modułu DIMM:	4GB, 8GB, 16GB
Zegar czasu rzeczywistego (rtc):	Tak
Wersja UEFI:	2.3.1