Instrukcja obsługi Supermicro SuperServer E403-9D-14CN-FN13TP

Supermicro nieskategoryzowany SuperServer E403-9D-14CN-FN13TP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer E403-9D-14CN-FN13TP (138 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/138
USER’S MANUAL
Revision 1.0a
SuperServer®
E403-9D-4C-FN13TP
E403-9D-8CN-FN13TP
E403-9D-12C-FN13TP
E403-9D-14C-FN13TP
E403-9D-14CN-FN13TP
E403-9D-16C-FN13TP
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a consumer environment or residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct
the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0a
Release Date: April 10, 2020
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2020 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
3
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It provides
information for the installation and use of this server. Installation and maintenance should be
performed by experienced technicians only.
Please refer to the E403-9D-4C-FN13TP, E403-9D-8CN-FN13TP, E403-9D-12C-FN13TP,
E403- 9 D-14C-FN13T P, E403- 9 D-14CN-FN13 T P, E403 - 9D-16C-FN13 T P, or
E403-9D-16C-FN13TP server specications page on our website for updates on supported
memory, processors and operating systems (http://www.supermicro.com).
Notes
For your system to work properly, please follow the links below to download all necessary
drivers/utilities and the user’s manual for your server.
Supermicro product manuals: http://www.supermicro.com/support/manuals/
Product drivers and utilities: https://www.supermicro.com/wftp
Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm
If you have any questions, please contact our support team at: support@supermicro.com
This manual may be periodically updated without notice. Please check the Supermicro website
for possible updates to the manual revision level.
Secure Data Deletion
A secure data deletion tool designed to fully erase all data from storage devices can be found
on our website: https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/
Lot9_Secure_Data_Deletion_Utility/
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.


Specyfikacje produktu

Marka: Supermicro
Kategoria: nieskategoryzowany
Model: SuperServer E403-9D-14CN-FN13TP
Kolor produktu: Czarny
Wysokość produktu: 109 mm
Szerokość produktu: 267 mm
Głębokość produktu: 406 mm
Waga produktu: 7700 g
Zakres temperatur (eksploatacja): 10 - 40 °C
Zakres wilgotności względnej: 8 - 90 %
Taktowanie procesora: 1.9 GHz
Typ procesora: Intel® Xeon® D
Model procesora: D-2177NT
Liczba portów USB 2.0: 2
Przewodowa sieć LAN: Tak
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Producent procesora: Intel
Liczba rdzeni procesora: 14
Typ pamięci wewnętrznej: DDR4-SDRAM
Pamięć wewnętrzna: - GB
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 2
Zainstalowany system operacyjny: Nie
Maksymalna pojemność pamięci: 512 GB
Gniazdo procesora: BGA 2518
Typ BIOS: AMI
Ilość złączy SATA III: 4
Zasilanie: 600 W
Gniazda PCI Express x16 (Gen 3.x): 2
Rodzaj interfejsu sieci Ethernet: 10 Gigabit Ethernet
Liczba portów VGA (D-Sub): 1
Korekcja ECC: Tak
Gniazda pamięci: 4
Rozmiar HDD: - "
Całkowita pojemność przechowywania: - GB
Procesor ARK ID: 136436
Technologia Intel® Hyper Threading (Intel® HT Technology): Tak
Technologia Intel® Turbo Boost: 2.0
Nowe instrukcje AES (Intel® AES-NI): Tak
Technologia Udoskonalona Intel SpeedStep: Tak
Technologia Intel® Trusted Execution: Tak
Maksymalna konfiguracja CPU: 1
Intel® Enhanced Halt State: Tak
Intel® VT-x with Extended Page Tables (EPT): Tak
Intel® TSX-NI: Tak
Intel® Secure Key: Tak
Intel® 64: Tak
Intel® OS Guard: Tak
Technologia Wirtualizacji Intel® (Directed I/O) (VT-d): Tak
Technologia Intel® Software Guard Extensions (Intel® SGX): Nie
Wersja technologii Intel® Secure Key: 1.00
Technologia virtualizacji Intel® (VT-x): Tak
Wersja Intel® TSX-NI: 1.00
Maksymalna pojemność przchowywania: - TB
Liczba procesorów: 1
Cache procesora: 19 MB
Wskaźnik magistrali systemowej: - GT/s
Maksymalne taktowanie procesora: 3 GHz
Litografia procesora: 14 nm
Liczba wątków: 28
Nazwa kodowa procesora: Skylake
Maksymalna pamięć wewnętrzna wspierana przez procesor: 512 GB
Typy pamięci wspierane przez procesor: DDR4-SDRAM
Taktowanie zegara pamięci wspierane przez procesor: 2667 MHz
Maksymalna liczba linii PCI Express: 32
Termiczny układ zasilania (TDP): 105 W
Bezkonfliktowy procesor: Tak
Stepping: M1
Kod procesora: SR3ZY
Technologia Execute Disable Bit (EDB): Tak
Stan spoczynku: Tak
Technologie Thermal Monitoring: Tak
Skalowalność: 1S
Wbudowane opcje dostępne: Tak
Typ magistrali: UPI
Liczba głównych źródeł zasilania: 1
Gniazda PCI Express x8 (Gen 3.x): 3
Wersja gniazd typu Slot (PCI Express): 3.0
Intel® Rapid Storage Technology: Tak
Napędy optyczne: Nie
Obsługa IPMI: Tak
Technologia Intel® QuickAssist: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer E403-9D-14CN-FN13TP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Supermicro

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024