Instrukcja obsługi Supermicro SuperServer 6028R-TT

Supermicro nieskategoryzowany SuperServer 6028R-TT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 6028R-TT (128 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/128
S SUPER ERVER®
6028R-T
6028R-TT
SUPER ®
USER’S MANUAL
1.0
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful interference
with radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0
Release Date: August 7, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6028R-T/TT.
Installation and maintenance should be performed by experienced technicians only.
The SuperServer 6028R-T/TT is a high-end server based on the SC823TQ-
653LPB 2U rackmount chassis and the Super X10DRi/X10DRi-T dual processor
serverboard.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the X10DRi/X10DRi-T serverboard
and the SC823TQ-653LPB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6028R-T/TT
into a rack and check out the server conguration prior to powering up the system.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6028R-T/TT.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X10DRi/X10DRi-T serverboard,
including the locations and functions of connections, headers and jumpers. Refer


Specyfikacje produktu

Marka: Supermicro
Kategoria: nieskategoryzowany
Model: SuperServer 6028R-TT
Kolor produktu: Czarny
Wbudowany wyłącznik: Tak
Wysokość produktu: 89 mm
Szerokość produktu: 490 mm
Głębokość produktu: 680 mm
Waga produktu: 14200 g
Prędkość transferu danych przez Ethernet LAN: 10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 3
Zakres temperatur (eksploatacja): 10 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Typ procesora: Intel® Xeon E5 v3
Kod zharmonizowanego systemu (HS): 84714100
Liczba portów USB 2.0: 2
Przewodowa sieć LAN: Tak
Diody LED: Tak
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci: 6
Obsługiwane rozmiary dysków pamięci: 2.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 2
Obudowa: Rack (2U)
Obsługiwane rodzaje pamięci: DDR4-SDRAM
Maksymalna pojemność pamięci: 1000 GB
Gniazdo procesora: LGA 2011 (Socket R)
Procesor: Intel® Xeon®
Układ płyty głównej: Intel® C612
Poziomy raid: 0, 1,5, 10
Typ BIOS: AMI
PCI Express x16 gniazda: 3
Ilość złączy SATA III: 10
Zasilanie: 650 W
Wspierane interfejsy dysków twardych: Serial ATA III
Rodzaj interfejsu sieci Ethernet: Fast Ethernet, Gigabit Ethernet
Kontroler LAN: Intel® I350
Liczba portów VGA (D-Sub): 1
Korekcja ECC: Tak
Rozmiar pamięci BIOS: 128 Mbit
Wersja ACPI: 4.0
Technologia okablowania Copper Ethernet: 1000BASE-T, 100BASE-TX, 10BASE-T
Wskaźnik magistrali systemowej: 9.6 GT/s
Model karty graficznej on-board: Aspeed AST2400
Szeregowe porty komunikacyjne: 1
Napięcie pamięci: 1.2 V
Intel® Xeon series: E5-2600
Ilość slotów DIMM: 16
Liczba obsługiwanych procesorów: 2
Przemieszczanie twardej wnęki na napęd HDD: Tak
Maksymalna pojemność pamięci RDIMM: 32 GB
PCI Express x8 slots: 3
Port IPMI LAN (RJ-45): Tak
Funkcje BIOS: APM 1.2, UEFI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer 6028R-TT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Supermicro

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024