Instrukcja obsługi Supermicro SuperServer 5019D-4C-FN8TP

Supermicro nieskategoryzowany SuperServer 5019D-4C-FN8TP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5019D-4C-FN8TP (128 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/128





SuperServer®



The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes

no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update

or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:

For the most up-to-date version of this manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual

at any time and without notice. This product, including software and documentation, is the property of Supermicro and/

or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except

as expressly permitted by the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT

OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER

MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED

OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the

State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution

of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,

may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only

to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.

See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate

The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,

nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical

systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic

property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products

for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully

indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and

proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Manual March 02, 2023

Release Date: March 02, 2023

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this

document. Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

SuperServer 5019D-FN8TP User's Manual

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It provides

information for the installation and use of the SuperServer 5019D-FN8TP. Installation and

maintenance should be performed by experienced technicians only.

Please refer to the 5019D-FN8TP server specications page on our website for updates on

supported memory, processors, and operating systems (http://www.supermicro.com).

Notes

For your system to work properly, please follow the links below to download all necessary

drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: https://www.supermicro.com/wftp/

• Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, contact our support team at:

support@supermicro.com

This manual may be periodically updated without notice. Please check the Supermicro website

for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing a procedure.

Warning! Indicates important information given to prevent equipment/property damage

or personal injury.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	nieskategoryzowany
Model:	SuperServer 5019D-4C-FN8TP
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	43 mm
Szerokość produktu:	437 mm
Głębokość produktu:	249 mm
Waga produktu:	3630 g
Szerokość opakowania:	655 mm
Wysokość opakowania:	155 mm
Głębokość opakowania:	465 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Procesor wbudowany:	Tak
Prędkość transferu danych przez Ethernet LAN:	10,100,1000,10000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	6
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Typ procesora:	Intel® Xeon® Scalable
Kod zharmonizowanego systemu (HS):	84714100
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	5440 g
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	4
Obsługiwane rodzaje dysków:	HDD & SSD
Obsługiwane rozmiary dysków pamięci:	2.5, 3.5, M.2 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	2
Obudowa:	Rack (1U)
Rodzaj chłodzenia:	Aktywne
Liczba wentylatorów:	3 went.
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Bez kody korekcyjnego:	Tak
Maksymalna pojemność pamięci:	512 GB
Gniazdo procesora:	BGA 2518
Procesor:	Intel® Xeon®
Układ płyty głównej:	Intel SoC
Typ BIOS:	AMI
Liczba gniazd M.2 (M):	2
Ilość złączy SATA III:	4
Zasilanie:	200 W
Prąd wejściowy:	2.6 A
Rodzaj interfejsu sieci Ethernet:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Kontroler LAN:	Intel® I350-AM4
Przycisk reset:	Tak
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	128 Mbit
Wersja ACPI:	5.0
Wersja systemu BIOS (SMBIOS):	2.8
Ilość zatok 3.5":	1
Ilość zatok 2,5 ":	4
Pamięć ECC wspierana przez procesor:	Tak
Moduł TPM (Trusted Platform Module):	Tak
Wersja TPM:	2.0
Model karty graficznej on-board:	Aspeed AST2500
Liczba głównych źródeł zasilania:	1
Gniazda PCI Express x8 (Gen 3.x):	1
Wersja gniazd typu Slot (PCI Express):	3.0
Napięcie pamięci:	1.2 V
Ilość slotów DIMM:	4
Liczba obsługiwanych procesorów:	1
Prędkość zegara pamięci RDIMM:	2133,2400,2666 MHz
Przemieszczanie twardej wnęki na napęd HDD:	Nie
Certyfikat 80 PLUS:	80 PLUS Gold
Średnica czaszy wentylatora:	40 mm
Ilość slotów Modułu SFP+:	2
Maksymalna pojemność pamięci RDIMM:	256 GB
Obsługuje rozmiary DIMM:	16GB, 32GB, 64GB, 128MB
Prąd stały (+5 V):	8 A
Prąd stały (+12 V):	16 A
Obsługa IPMI:	Tak
Zintegrowany BMC z IPMI:	Tak
Port IPMI LAN (RJ-45):	Tak
Wersja UEFI:	2.4
Funkcje BIOS:	PCI 3.0, SMBIOS 2.8, UEFI