Instrukcja obsługi Supermicro SuperServer 5019A-12TN4

Supermicro nieskategoryzowany SuperServer 5019A-12TN4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5019A-12TN4 (115 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/115
USER'S MANUAL
Revision 1.0
SuperServer®
5019A-12TN4
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual April 25, 2018
Release Date: Revision 1.0
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2018 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
SuperServer 5019A-12TN4 User's Manual
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It provides
information for the installation and use of the SuperServer 5019A-12TN4. Installation and
maintenance should be performed by experienced technicians only.
Please refer to the 5019A-12TN4 server specications page on our website for updates on
supported memory, processors and operating systems (http://www.supermicro.com).
Notes
For your system to work properly, please follow the links below to download all necessary
drivers/utilities and the user’s manual for your server.
Supermicro product manuals: http://www.supermicro.com/support/manuals/
Product drivers and utilities: ftp://ftp.supermicro.com
Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm
If you have any questions, please contact our support team at:
support@supermicro.com
This manual may be periodically updated without notice. Please check the Supermicro website
for possible updates to the manual revision level.
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.


Specyfikacje produktu

Marka: Supermicro
Kategoria: nieskategoryzowany
Model: SuperServer 5019A-12TN4
Kolor produktu: Czarny
Częstotliwość wejściowa AC: 50 - 60 Hz
Napięcie wejściowe AC: 100 - 240 V
Wysokość produktu: 43 mm
Szerokość produktu: 437 mm
Głębokość produktu: 249 mm
Waga produktu: 3620 g
Procesor wbudowany: Nie
Prędkość transferu danych przez Ethernet LAN: 10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 4
Zakres temperatur (eksploatacja): 0 - 40 °C
Zakres wilgotności względnej: 8 - 90 %
Typ procesora: Intel
Kod zharmonizowanego systemu (HS): 84714100
Przewodowa sieć LAN: Tak
Waga wraz z opakowaniem: 4540 g
Diody LED: HDD, LAN, Network, Power
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci: 4
Obsługiwane rozmiary dysków pamięci: 2.5, 3.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 2
Obudowa: Rack (1U)
Liczba wentylatorów: 2 went.
Obsługiwane rodzaje pamięci: DDR4-SDRAM
Bez kody korekcyjnego: Tak
Maksymalna pojemność pamięci: 64 GB
Gniazdo procesora: BGA 1310
Układ płyty głównej: Intel SoC
Typ BIOS: UEFI AMI
Zasilanie: 200 W
Wspierane interfejsy dysków twardych: Serial ATA III
Rodzaj interfejsu sieci Ethernet: Fast Ethernet, Gigabit Ethernet
Kontroler LAN: Intel® I350-AM4
Liczba portów VGA (D-Sub): 1
Korekcja ECC: Tak
Technologia okablowania Copper Ethernet: 10BASE-T, 100BASE-TX, 1000BASE-T
Model karty graficznej on-board: Aspeed AST2400
Wersja gniazd typu Slot (PCI Express): 3.0
Napięcie pamięci: 1.2 V
Ilość slotów DIMM: 4
PCI Express x4 slots: 1
Maksymalna pojemność pamięci UDIMM: 64 GB
Prędkość zegara pamięci UDIMM: 1600,1866,2133,2400 MHz
Obsługuje rozmiary DIMM: 4GB, 8GB, 16GB
Prąd stały (+5 V): 8 A
Prąd stały (+12 V): 16 A
Port IPMI LAN (RJ-45): Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer 5019A-12TN4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Supermicro

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024