Instrukcja obsługi Supermicro SuperServer 5018D-FN4T

Supermicro nieskategoryzowany SuperServer 5018D-FN4T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5018D-FN4T (118 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/118
USER’S MANUAL
Revision 1.0
S SUPER ERVER®
5018D-FN4T
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturers instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0
Release Date: April 27, 2015
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2015 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer. Installation and
maintainance should be performed by experienced technicians only.
Please refer to the server specications page on our Web site for updates on
supported memory, processors and operating systems (http://www.supermicro.
com).
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing
a procedure.
Warning! Indicates important information given to prevent equipment/
property damage or personal injury.


Specyfikacje produktu

Marka: Supermicro
Kategoria: nieskategoryzowany
Model: SuperServer 5018D-FN4T
Kolor produktu: Czarny, Srebrny
Wbudowany wyłącznik: Tak
Częstotliwość wejściowa AC: 50 - 60 Hz
Napięcie wejściowe AC: 100 - 240 V
Wysokość produktu: 43 mm
Szerokość produktu: 437 mm
Głębokość produktu: 249 mm
Waga produktu: 3620 g
Certyfikat środowiskowy (zrównoważonego rozwoju): RoHS
Prędkość transferu danych przez Ethernet LAN: 10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 5
Zakres temperatur (eksploatacja): 10 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Typ procesora: Intel
Kod zharmonizowanego systemu (HS): 84714100
Przewodowa sieć LAN: Tak
Diody LED: Tak
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci: 2
Obsługiwane rozmiary dysków pamięci: 2.5, 3.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 2
Obudowa: Rack (1U)
Liczba wentylatorów: 1 went.
Obsługiwane rodzaje pamięci: DDR4-SDRAM
Bez kody korekcyjnego: Tak
Maksymalna pojemność pamięci: 128 GB
Gniazdo procesora: BGA 1667
Procesor: Intel® Xeon®
Typ BIOS: AMI
PCI Express x16 gniazda: 1
Ilość złączy SATA III: 6
Zasilanie: 200 W
Wspierane interfejsy dysków twardych: druga generacja szeregowej magistrali komputerowej (serial ATA II)
Rodzaj interfejsu sieci Ethernet: Fast Ethernet, Gigabit Ethernet
Kontroler LAN: Intel I350-AM2, Realtek RTL8201N
Liczba portów VGA (D-Sub): 1
Korekcja ECC: Tak
Rozmiar pamięci BIOS: 64 Mbit
Wersja ACPI: 4.0
Technologia okablowania Copper Ethernet: 1000BASE-T, 100BASE-T, 10BASE-T
Moduł TPM (Trusted Platform Module): Tak
Wersja TPM: 1.2
Model karty graficznej on-board: Aspeed AST2400
Szeregowe porty komunikacyjne: 2
Napięcie pamięci: 1.5 V
Intel® Xeon series: D-1500
Ilość slotów DIMM: 4
Liczba obsługiwanych procesorów: 1
Przemieszczanie twardej wnęki na napęd HDD: Nie
Średnica czaszy wentylatora: 40 mm
Maksymalna pojemność pamięci RDIMM: 128 GB
Maksymalna pojemność pamięci UDIMM: 64 GB
Obsługuje rozmiary DIMM: 16GB, 32GB, 4GB, 8GB
Obsługa IPMI: Tak
Port IPMI LAN (RJ-45): Tak
Funkcje BIOS: PCI 2.3, APM 1.2, Plug & Play, UEFI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer 5018D-FN4T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Supermicro

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024