Instrukcja obsługi Supermicro SuperServer 5018A-TN7B

Supermicro nieskategoryzowany SuperServer 5018A-TN7B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5018A-TN7B (122 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/122
USER’S MANUAL
Revision 1.0a
S SUPER ERVER®
5018A-TN7B
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a consumer environment
or residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause
harmful interference with radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case you will be required to correct the interference
at your own expense
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
Manual Revision 1.0a
Release Date: September 01, 2020
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2020 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
3
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer. Installation and
maintenance should be performed by experienced technicians only.
Please refer to the server specications page on our Web site for updates on
supported memory, processors and operating systems (http://www.supermicro.
com).
This manual may be periodically updated without notice. Please check the
Supermicro Web site for possible updates to the manual revision level.
Secure Data Deletion
A secure data deletion tool designed to fully erase all data from storage devices
can be found on our website: https://www.supermicro.com/about/policies/disclaimer.
cfm?url=/wftp/utility/Lot9_Secure_Data_Deletion_Utility/
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing
a procedure.
Warning! Indicates important information given to prevent equipment/
property damage or personal injury.


Specyfikacje produktu

Marka: Supermicro
Kategoria: nieskategoryzowany
Model: SuperServer 5018A-TN7B
Kolor produktu: Czarny
Częstotliwość wejściowa AC: 50 - 60 Hz
Napięcie wejściowe AC: 100 - 240 V
Wysokość produktu: 43 mm
Szerokość produktu: 437 mm
Głębokość produktu: 287 mm
Waga produktu: 3830 g
Certyfikat środowiskowy (zrównoważonego rozwoju): RoHS
Prędkość transferu danych przez Ethernet LAN: 10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 7
Zakres temperatur (eksploatacja): 10 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Typ procesora: Intel
Liczba portów USB 2.0: 7
Przewodowa sieć LAN: Tak
Diody LED: Tak
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci: 1
Obsługiwane rozmiary dysków pamięci: 3.5 "
Obudowa: Rack (1U)
Liczba wentylatorów: 4 went.
Obsługiwane rodzaje pamięci: DDR3-SDRAM
Bez kody korekcyjnego: Tak
Maksymalna pojemność pamięci: 64 GB
Gniazdo procesora: BGA 1283
Procesor: Intel Atom®
Typ BIOS: EEPROM
Zasilanie: 200 W
Rodzaj interfejsu sieci Ethernet: Fast Ethernet, Gigabit Ethernet
Kontroler LAN: Intel I210-AT, Intel I350-AM2, Realtek RTL8201N
Liczba portów VGA (D-Sub): 1
Korekcja ECC: Tak
Rozmiar pamięci BIOS: 128 Mbit
Wersja ACPI: 5.0
Moduł TPM (Trusted Platform Module): Tak
Wersja TPM: 1.2
Model karty graficznej on-board: Aspeed AST2400
Szeregowe porty komunikacyjne: 2
Wersja gniazd typu Slot (PCI Express): 2.0
Rodzaj pamięci: 240-pin DIMM
Napięcie pamięci: 1.35, 1.5 V
Ilość slotów DIMM: 4
Liczba obsługiwanych procesorów: 1
Prędkość zegara pamięci RDIMM: 1333,1600 MHz
Przemieszczanie twardej wnęki na napęd HDD: Tak
Średnica czaszy wentylatora: 40 mm
PCI Express x4 slots: 1
Obsługuje rozmiary DIMM: 16GB, 2GB, 4GB, 8GB
Prąd stały (+5 V): 8 A
Prąd stały (+12 V): 16 A
Obsługa IPMI: Tak
Port IPMI LAN (RJ-45): Tak
Funkcje BIOS: Plug & Play, UEFI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer 5018A-TN7B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Supermicro

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024