Instrukcja obsługi Supermicro MBD-X8DTL-3-B

Supermicro płyta główna MBD-X8DTL-3-B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro MBD-X8DTL-3-B (5 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

X8DTL-3

X8DTL-i

USER’S MANUAL

Revision 1.2

X8DTL-3F

X8DTL-iF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.2

Release Date: Dec. 1, 2010

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for system integrators, PC technicians and knowledgeable PC

users. It provides information for the installation and use of the X8DTL-3/

X8DTL-i/X8DTL-3F/X8DTL-iF motherboard.

About this Motherboard

The X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF supports the Intel® 5500/5600

Series Processor, the ﬁ rst dual-processing platform that supports the Intel Quick-

Path Interconnect (QPI) Technology, providing the next generation point-to-point

system interface to replace the current Front Side Bus. With the Intel 5500/5600

Series Processor built in, the X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF substantially

enhances system performance with increased bandwidth and unprecedented scal-

ability optimized for high-end HCP/Cluster systems and intensive applications.

Please refer to our web site (http://www.supermicro.com/products/) for updates

on supported processors. This product is intended to be installed and serviced by

professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A . Appendix Blists BIOS POST Error Codes provides Software Instal-

lation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

iii

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	płyta główna
Model:	MBD-X8DTL-3-B
Szerokość produktu:	305 mm
Głębokość produktu:	254 mm
Certyfikaty:	RoHS
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Liczba portów USB 2.0:	2
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Bez kody korekcyjnego:	Tak
Obsługiwane prędkości zegara pamięci:	800,1066,1333 MHz
Rodzaj płyty:	ATX
Układ płyty głównej:	Intel® 5500
Poziomy raid:	0, 1,5, 10
Typ BIOS:	AMI
Ilość gniazd USB 2.0:	1
Ilość gniazd w podstawie wentylatora:	6
Gniazdo na obudowie:	Tak
Liczba portów PS/2:	2
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Kontroler LAN:	Intel® 82574L
Liczba portów VGA (D-Sub):	1
Dołączone oprogramowanie:	Super Doctor III
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	32 Mbit
Wersja ACPI:	3.0
Karta graficzna on-board:	Tak
Szeregowe porty komunikacyjne:	1
Napięcie pamięci:	1.5 V
Ilość slotów DIMM:	6
Prędkość zegara pamięci RDIMM:	800,1066,1333 MHz
Sloty PCI:	2
PCI Express x4 slots:	1
Maksymalna pojemność pamięci RDIMM:	48 GB
Maksymalna pojemność pamięci UDIMM:	24 GB
Prędkość zegara pamięci UDIMM:	800,1066,1333 MHz
Obsługuje rozmiary DIMM:	1GB, 2GB, 4GB, 8GB
PCI Express x8 slots:	3