Instrukcja obsługi Supermicro MBD-H8SML-IF-O

Supermicro płyta główna MBD-H8SML-IF-O

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro MBD-H8SML-IF-O (78 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/78

USER’S MANUAL

Revision 1.0c

SUPER

H8SML-7

H8SML-i

H8SML-7F

H8SML-iF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0c

Release Date: March 12, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

H8SML-7/i(F) serverboard.

The H8SML-7/i(F) serverboard is based on the AMD® SR5650/SP5100 chipsets

and supports one AMD Socket AM3+ type processor with up to 32 GB of DDR3

Unbuffered ECC DDR3-1600/1333/1066 Mhz SDRAM in four (4) DIMMs. The

only differences between the various models of boards is that the H8SML-7 and

H8SML-7F serverboards have SAS2 capability, and that the H8SML-7F and

H8SML-iF serverboards have IPMI capability.

Please refer to the motherboard speciﬁ cations pages on our web site for updates on

supported processors (http://www.supermicro.com/aplus/). This product is intended

to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your motherboard

box, describes the features, speciﬁ cations and performance of the motherboard

and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices. Read this

chapter when installing the processor(s) and memory modules and when installing

the motherboard in a chassis. Also refer to this chapter to connect the hard disk

drives, the various ports, and the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for the video, the memory and the setup conﬁ guration stored in CMOS.

For quick reference, a general FAQ (Frequently Asked Questions) section is

provided. Instructions are also included for contacting technical support. In addition,

you can visit our web site for more detailed information.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Code Messages.

Appendix B lists BIOS POST Checkpoint Codes.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	płyta główna
Model:	MBD-H8SML-IF-O
Szerokość produktu:	244 mm
Głębokość produktu:	244 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Przeznaczenie:	Serwer
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Wi-Fi:	Nie
Liczba portów USB 2.0:	2
Przewodowa sieć LAN:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Producent procesora:	AMD
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Bez kody korekcyjnego:	Tak
Obsługiwane prędkości zegara pamięci:	1066,1333,1600 MHz
Maksymalna pojemność pamięci:	32 GB
Obsługa kanałów pamięci:	Dwukanałowy
Gniazdo procesora:	Socket AM3+
Rodzaj płyty:	micro ATX
Układ płyty głównej:	AMD SR5650
Poziomy raid:	0, 1,10
Typ BIOS:	AMI
Ilość gniazd USB 2.0:	2
Gniazdo na obudowie:	Tak
Wspierane interfejsy dysków twardych:	SATA II
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Złącze Serial port:	1
Rozmiar pamięci BIOS:	16 Mbit
Wersja ACPI:	2.0
Pamięć ECC wspierana przez procesor:	Tak
Model karty graficznej on-board:	Matrox G200eW
Szeregowe porty komunikacyjne:	1
PCI Express x4 (Gen 2.x) slots:	1
Napięcie pamięci:	1.35, 1.5 V
Intel® Xeon series:	3000
Ilość slotów DIMM:	4
Liczba obsługiwanych procesorów:	1
Ilość złączy SATA II:	6
Mostek południowy płyty głównej:	AMD SP5100
Obsługuje rozmiary DIMM:	1GB, 2GB, 4GB, 8GB
Obsługiwana liczba rdzeni procesora:	4, 8
Port IPMI LAN (RJ-45):	Tak
PCI Express x8 (Gen 2.x) slots:	2
Pamięć karty graficznej on-board:	16 MB