Instrukcja obsługi Supermicro H8SGL-F

Supermicro płyta główna H8SGL-F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro H8SGL-F (74 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/74

H8SGL

H8SGL-F

USER’S MANUAL

Revision 1.0d

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0d

Release Date: November 23, 2010

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

H8SGL(-F) serverboard.

The H8SGL(-F) serverboard is based on the AMD® SR5650/SP5100 chipset

and supports one AMD Socket G34 type processor with up to 128 GB of DDR3-

1333/1066/800 registered ECC SDRAM or 32 GB of DDR3-1333/1066/800 MHz

unbuffered ECC/non-ECC SDRAM. The H8SGL serverboard does not have IPMI

capability, whereas the H8SGL-F serverboard does.

Please refer to the motherboard speciﬁ cations pages on our web site for updates on

supported processors (http://www.supermicro.com/aplus/). This product is intended

to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your motherboard

box, describes the features, speciﬁ cations and performance of the motherboard

and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices. Read this

chapter when installing the processor(s) and memory modules and when installing

the motherboard in a chassis. Also refer to this chapter to connect the hard disk

drives, the various ports, and the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for the video, the memory and the setup conﬁ guration stored in CMOS.

For quick reference, a general FAQ (Frequently Asked Questions) section is

provided. Instructions are also included for contacting technical support. In addition,

you can visit our web site for more detailed information.

Appendix A provides BIOS Error Beep Code Messages.

Appendix B lists BIOS POST Checkpoint Codes.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	płyta główna
Model:	H8SGL-F
Szerokość produktu:	305 mm
Głębokość produktu:	203 mm
Ilość portów Ethernet LAN (RJ-45):	2
Wi-Fi:	Nie
Liczba portów USB 2.0:	2
Przewodowa sieć LAN:	Tak
Usługa RAID:	Tak
Producent procesora:	AMD
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Bez kody korekcyjnego:	Tak
Obsługiwane prędkości zegara pamięci:	1066,1333,1600 MHz
Maksymalna pojemność pamięci:	256 GB
Obsługa kanałów pamięci:	Czterokanałowy
Gniazdo procesora:	Gniazdo G34
Rodzaj płyty:	ATX
Układ płyty głównej:	AMD SR5650
Poziomy raid:	1, 10
Typ BIOS:	AMI
Ilość gniazd USB 2.0:	6
Liczba portów PS/2:	2
Wspierane interfejsy dysków twardych:	SATA II
Obsługa przetwarzania równoległego:	Nieobsługiwany
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Kontroler LAN:	Intel® 82574L
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	16 Mbit
Wersja ACPI:	2.0
Karta graficzna on-board:	Tak
Model karty graficznej on-board:	Matrox G200
Szeregowe porty komunikacyjne:	1
PCI Express x4 (Gen 2.x) slots:	1
Napięcie pamięci:	1.35, 1.5 V
Ilość slotów DIMM:	8
Liczba obsługiwanych procesorów:	1
Prędkość zegara pamięci RDIMM:	1066,1333,1600 MHz
Sloty PCI:	3
Ilość złączy SATA II:	6
Maksymalna pojemność pamięci RDIMM:	256 GB
Seria AMD Opteron:	6000
Mostek południowy płyty głównej:	AMD SP5100
Maksymalna pojemność pamięci UDIMM:	64 GB
Prędkość zegara pamięci UDIMM:	1066,1333,1600 MHz
Obsługuje rozmiary DIMM:	16GB, 1GB, 2GB, 32GB, 4GB, 8GB
Obsługiwana liczba rdzeni procesora:	4, 8,12, 16
PCI Express x8 (Gen 2.x) slots:	2
Pamięć karty graficznej on-board:	16 MB