Instrukcja obsługi Supermicro H8SCM-F

Supermicro płyta główna H8SCM-F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro H8SCM-F (72 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/72

H8SCM

H8SCM-F

USER’S MANUAL

Revision 1.0c

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0c

Release Date: April 1, 2011

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

H8SCM(-F) serverboard.

The H8SCM(-F) serverboard is based on the AMD® SR5650/SP5100

chipset and supports one AMD Socket C32 type processor with up to

16GB of ECC/Non-ECC UDIMM or up to 64GB of ECC RDIMM. The H8SCM

serverboard does not have IPMI capability, whereas the H8SCM-F serverboard

does.

Please refer to the motherboard speciﬁ cations pages on our web site for updates on

supported processors (http://www.supermicro.com/aplus/). This product is intended

to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your motherboard

box, describes the features, speciﬁ cations and performance of the motherboard

and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices. Read this

chapter when installing the processor(s) and memory modules and when installing

the motherboard in a chassis. Also refer to this chapter to connect the hard disk

drives, the various ports, and the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for the video, the memory and the setup conﬁ guration stored in CMOS.

For quick reference, a general FAQ (Frequently Asked Questions) section is

provided. Instructions are also included for contacting technical support. In addition,

you can visit our web site for more detailed information.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Code Messages.

Appendix B lists BIOS POST Checkpoint Codes.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	płyta główna
Model:	H8SCM-F
Szerokość produktu:	244 mm
Głębokość produktu:	218 mm
Przeznaczenie:	Serwer
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Wi-Fi:	Nie
Liczba portów USB 2.0:	7
Przewodowa sieć LAN:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Producent procesora:	AMD
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Bez kody korekcyjnego:	Tak
Obsługiwane prędkości zegara pamięci:	1066,1333,1600 MHz
Maksymalna pojemność pamięci:	128 GB
Gniazdo procesora:	Socket C32
Rodzaj płyty:	micro ATX
Układ płyty głównej:	AMD SR5690
Poziomy raid:	0, 1,10
Typ BIOS:	AMI
PCI Express x16 gniazda:	1
Ilość gniazd USB 2.0:	5
Gniazdo wentylatora procesora:	Tak
Liczba portów PS/2:	1
Wspierane interfejsy dysków twardych:	SATA II
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Kontroler LAN:	Intel® 82574L
Liczba portów VGA (D-Sub):	1
Obsługiwane gniazda procesora:	Socket C32
Korekcja ECC:	Tak
Złącze Serial port:	2
Rozmiar pamięci BIOS:	16 Mbit
Wersja ACPI:	2.0
Model karty graficznej on-board:	Matrox G200eW
Szeregowe porty komunikacyjne:	1
Wersja gniazd typu Slot (PCI Express):	2.0
Napięcie pamięci:	1.35, 1.5 V
Ilość slotów DIMM:	4
Liczba obsługiwanych procesorów:	1
Ilość gniazd SATA:	6
PCI Express x4 slots:	1
Maksymalna pojemność pamięci RDIMM:	128 GB
Seria AMD Opteron:	4000
Maksymalna pojemność pamięci UDIMM:	32 GB
Obsługuje rozmiary DIMM:	16GB, 1GB, 2GB, 32GB, 4GB, 8GB
PCI Express x8 slots:	1
Obsługiwana liczba rdzeni procesora:	4, 8
Port IPMI LAN (RJ-45):	Tak
Pamięć karty graficznej on-board:	16 MB