Instrukcja obsługi Sunbeam Verve SR6250

Sunbeam Strijkijzer Verve SR6250

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sunbeam Verve SR6250 (12 stron) w kategorii Strijkijzer. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

Verve® Irons

Instruction Booklet

This book covers the use and care of the following Verve™ Irons:

SR6850 Verve® 68 Resilium® Shot & Spray Iron with Safety Auto-Off

SR6650 Verve® 66 Stainless Shot & Spray Iron with Safety Auto-Off

SR6550 Verve® 65 Platinum Shot & Spray Iron with Safety Auto-Off

SR6250 Verve® 62 Platinum Shot & Spray Iron

Please read these instructions carefully

and retain for future reference.

Sunbeam’s Safety Precautions 3

Features of your Verve Iron 4

Using your Verve Iron 6

The Safety Auto-Off Feature 7

Care and Cleaning of your Verve Iron 8

Ironing Tips & Tricks 9

Ironing Chart 10

Contents

Important instructions – retain

for future use.

Sunbeam’s Safety Precautions

Sunbeam is very safety conscious when

designing and manufacturing consumer

products, but it is essential that the product

user also exercise care when using an

electrical appliance. Listed below are

precautions which are essential for the safe use

of an electrical appliance:

• Read carefully and save all the instructions

provided with an appliance.

• Always turn the power off at the power outlet

before you insert or remove a plug.

Remove by grasping the plug - do not pull on

the cord.

• Turn the power off and remove the plug

when the appliance is not in use and

before cleaning.

• Do not use your appliance with an extension

cord unless this cord has been checked

and tested by a qualified technician or

service person.

• Always use your appliance from a power

outlet of the voltage (A.C. only) marked

on the appliance.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• The temperature of accessible surfaces may

be high when the appliance is operating.

• Never leave an appliance unattended while

in use.

• Do not use an appliance for any purpose

other than its intended use.

• Do not place an appliance on or near a hot

gas flame, electric element or on a heated

oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance

hang over the edge of a table or bench top

or touch any hot surface.

• Do not operate any electrical appliance with

a damaged cord or after the appliance has

been damaged in any manner. If damage

is suspected, return the appliance to the

nearest Sunbeam Appointed Service Centre

for examination, repair or adjustment.

• For additional protection, Sunbeam

recommend the use of a residual current

device (RCD) with a tripping current not

exceeding 30mA in the electrical circuit

supplying power to your appliances.

• Do not immerse the appliance in water

or any other liquid unless recommended.

• Appliances are not intended to be operated

by means of an external timer or separate

remote control system.

• This appliance is intended to be used in

household and similar applications such

as: staff kitchen areas in shops, offices and

other working environments; farm houses; by

clients in hotels, motels and other residential

type environments; bed and breakfast type

environments.

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave a hot iron within reach of

children. If they come into contact with a

hot iron it could lead to serious burns.

• Iron only on an ironing board.

• An iron takes approximately 30 minutes to

cool down. Allow the iron to cool completely

before storing.

• Do not wind the cord around the soleplate

while the iron is still hot.

• Do not leave the iron unattended while it is

plugged into the power outlet.

• Always unplug the iron from the power

outlet before filling or emptying the water

tank.

• The iron must be used and rested on a

stable surface.

• The iron is not to be used if it has been

dropped, if there are visible signs of

damage or if it is leaking.

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Specyfikacje produktu

Marka:	Sunbeam
Kategoria:	Strijkijzer
Model:	Verve SR6250

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sunbeam Verve SR6250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Strijkijzer Sunbeam

Sunbeam Verve 680 SRA6800 Instrukcja

26 Września 2024

Sunbeam PressXPress STC5000 Instrukcja

26 Września 2024

Sunbeam Verve 650 CeraFlow SRC6500 Instrukcja

26 Września 2024

Sunbeam Verve 655 SRS6550 Instrukcja

26 Września 2024

Sunbeam Steam Master LX 4059 Instrukcja

10 Września 2024

Sunbeam Pro Steam Travel SR2300 Instrukcja

9 Września 2024

Sunbeam Pro Steam SR4260 Instrukcja

2 Września 2024

Sunbeam Steam Master 4215 Instrukcja

31 Sierpnia 2024

Sunbeam Steam Master 4216 Instrukcja

31 Sierpnia 2024

Sunbeam Verve SR6250 Instrukcja

24 Sierpnia 2024

Instrukcje Strijkijzer

Najnowsze instrukcje dla Strijkijzer

Exquisit BR3101wer Instrukcja

27 Września 2024

Domo DO 7071 S Instrukcja

26 Września 2024

Defy SI3126BG Instrukcja

26 Września 2024

Philips Azur Precise GC4310 Instrukcja

25 Września 2024

Cleanmaxx 00384 Instrukcja

25 Września 2024

Girmi ST01 Instrukcja

22 Września 2024

Girmi SS65 Instrukcja

22 Września 2024

Girmi ST91 Instrukcja

22 Września 2024

Conair DPP143 Instrukcja

22 Września 2024

Girmi ST62 Instrukcja

22 Września 2024