Instrukcja obsługi Sunbeam Steam Pro Non-Stop SR8500

Sunbeam Żelazo Steam Pro Non-Stop SR8500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sunbeam Steam Pro Non-Stop SR8500 (12 stron) w kategorii Żelazo. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Please read these instructions carefully
and retain for future reference.
Steam Pro Non-Stop
Professional Ironing System
Instruction Booklet
SR8500
Sunbeam’s Safety Precautions 1
Features of your Steam Pro Non-Stop 2
Using your professional ironing system 4
Care and cleaning 6
Ironing guide 7
Ironing chart 8
Contents
1
Sunbeam are very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:
Read carefully and save all the instructions
provided with an appliance.
Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.
Turn the power off and remove the plug
when the appliance is not in use and
before cleaning.
Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.
Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.
Close supervision is necessary when your
appliance is being used near children or
infirm persons.
Never leave an appliance unattended while
in use.
Young children should be supervised to ensure
that they do not play with the appliance.
Do not use an appliance for any purpose
other than its intended use.
Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
Do not place on top of any other appliance.
Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.
For safety reasons and to avoid maintenance
by unskilled persons, some appliances are
‘sealed’ using tamperproof screws. Such
appliances should always be returned to the
nearest Sunbeam Appointed Service Centre
for adjustment or repair if required.
Do not operate any electrical appliance with a
damaged cord or after the appliance has been
dropped or damaged in any manner. If damage
is suspected, return the appliance to the
nearest Sunbeam Appointed Service Centre
for examination, repair or adjustment.
For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.
Do not immerse the appliance in water
or any other liquid unless recommended.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeams Safety Precautions
SAFETY PRECAUTIONS FOR YOUR
PROFESSIONAL IRONING SYSTEM .
Do not leave a hot iron within reach of
children. If they come into contact with a hot
iron it could lead to serious burns!
Iron only on an ironing board.
An iron takes approximately 30 minutes
to cool down.
Do not wind the cord around the soleplate
Do not leave the iron unattended while it is
plugged into the power outlet.
Always unplug the iron from the power outlet
before filling or emptying the water tank.


Specyfikacje produktu

Marka: Sunbeam
Kategoria: Żelazo
Model: Steam Pro Non-Stop SR8500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sunbeam Steam Pro Non-Stop SR8500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Żelazo Sunbeam

Instrukcje Żelazo

Najnowsze instrukcje dla Żelazo

TriStar

TriStar ST-8137AH Instrukcja

15 Października 2024
Imetec

Imetec E9801 Instrukcja

15 Października 2024
Tefal

Tefal AquaTurbo FV8210 Instrukcja

11 Października 2024
Bomann

Bomann CB 740 Instrukcja

10 Października 2024
Laurastar

Laurastar LIFT 510 Instrukcja

10 Października 2024
Conair

Conair GlideLite GI305 Instrukcja

9 Października 2024
Ufesa

Ufesa GS1600 Instrukcja

9 Października 2024
Ufesa

Ufesa SV1200 Instrukcja

9 Października 2024
Ufesa

Ufesa Compact2Go GS1800 Instrukcja

9 Października 2024
Ufesa

Ufesa Digital Care Instrukcja

9 Października 2024