Instrukcja obsługi Summit CLFD24WCCSS

Summit Szafka klimatyczna na wino CLFD24WCCSS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Summit CLFD24WCCSS (39 stron) w kategorii Szafka klimatyczna na wino. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/39
Owner’s Manual
Manuel du propriétaire
Built-in Models:
CL24WC2 : 46-Bottle Wine Cooler
CLFD24WC : 42-Bottle Wine Cooler
CL242WBV : Wine Cooler & Beverage Center
CL15WC : 34-Bottle Wine Cooler
BEFORE USE, PLEASE READ AND FOLLOW
ALL SAFETY RULES AND OPERATING INSTRUCTIONS
Write Model & Serial Number here:
Felix Storch, Inc.
Summit Appliance Division
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
CL151WBV : Wine Cooler & Beverage Center
Table of contents
Safety instructions and warnings ............................................................. 2 –
5
Transportation and unpacking ........................................................................
6
Installation instructions ............................................................................. 6 –
Before installation of your appliance ........................................................ 6
Tools you will need ...................................................................................
7
Installation dimensions (built-in) ......................................................... 7 –
8
Electrical requirements .............................................................................
8
Operation ................................................................................................... – 1
5
Operating conditions ................................................................................
9
Control elements ................................................................................ 9 –
Setting the temperature ...................................................................... 9 –
Functions .................................................................................................
Shelves ..................................................................................................
12
Reversing the door ................................................................................. 13
Wine storage .......................................................................................... 1
5
Storage diagrams ................................................................................... 1
5
Cleaning and care ........................................................................................... 1
6
Cleaning the appliance ........................................................................... 1
6
Moving ................................................................................................... 1
6
Energy-saving tips .................................................................................. 1
6
Problems with your appliance? ..................................................................... 1
7
Limited warranty ...................................................................................... 1 - 1
1
8
9
10
10
11
88
99
9
8
Installing the handle
................................................................................. 1
4
Safety instructions and warnings
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Before the appliance is used, it must be properly positioned and installed as
described in this manual. So read the manual carefully. To reduce the risk of fire,
electric shock or injury when using the appliance, follow basic precautions, including
the following:
To prevent injury or damage to the
appliance, it should be unpacked and set
up by two people.
In the event that the appliance is
damaged on delivery, contact the supplier
immediately before connecting to the
power line.
To guarantee safe operation, ensure that
the appliance is set up and connected as
described in these operating instructions.
Disconnect the appliance from the power
source if any fault occurs. Pull out the plug,
switch off or remove the fuse.
When disconnecting the appliance, pull on
the plug, not on the cable.
Any repairs and work on the appliance
should only be carried out by the
customer service department, as
unauthorized work could prove highly
dangerous for the user. The same applies
to changing the power cable.
Do not stand on the base, drawers or
doors or use them to support anything
else.
Do not allow flames or sources of ignition
to enter the appliance. When transporting
and cleaning the appliance, ensure that
the refrigerant circuit is not damaged. In
the event of damage, make sure that
there are no ignition sources nearby.
■ Keep the room well ventilated.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge unless
they have been given initial supervision or
instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not play
with the appliance.
Do not store explosives or sprays using
combustible propellants such as butane,
propane, pentane, etc., in the appliance.
Electrical components might cause
leaking gas to ignite. You may identify
such sprays by the printed contents or a
flame symbol.
Do not use electrical devices inside the
appliance.
Before you throw away your old
appliance:
Take off the door. Leave the parts in place
so that children may not easily climb
inside.
When disposing of your appliance, please
choose an authorized disposal site.
2
Safety instructions and warnings
Children in the household
DANGER, RISK OF CHILD ENTRAPMENT!
Before you throw away your old appliance:
Take off the door. Leave the shelves in place
so that children may not easily climb inside.
Never leave packaging material with
children. There is a danger of poisoning or
suffocation by the cardboard boxes and
plastic sheets!
This appliance is in no way a toy for
children!
If you will no longer be using the
appliance, remove the doors and gasket
seals and store in a safe place. In this way
you will prevent the danger of children
becoming trapped inside the appliance.
Never allow children to operate, play with,
or crawl inside the appliance.
Child entrapment and suffocation are not
problems of the past. Junked or
abandoned appliances are still
dangerous....even if they will “just sit in the
garage a few days”.
Grounding instructions
This appliance must be grounded.
If the power socket of the home system is
not grounded in accordance with the
current legal regulations, connect the
appliance to the grounding lead itself after
consulting a specialized technician.
Do not use an extension cord with this
appliance.
This appliance is equipped with a power
cord having a grounding wire with a
grounding plug. The plug must be plugged
into an outlet that is properly installed and
grounded.
Consult a qualified electrician or service
technician if the grounding instructions are
not completely understood, or if doubt
exists as to whether the appliance is
properly grounded.
If the outlet is a standard 2-prong wall
outlet, it is your personal responsibility and
obligation to have it replaced with a
properly grounded 3-prong wall outlet.
For best operation, plug this appliance into
its own electrical outlet to prevent flickering
of lights, blowing of fuse or tripping of
circuit breaker.
under any circumstances cut or Do not
remove the third (ground) prong from the
power cord.
use an adapter plug with this Do not
appliance.
3
IMPORTANT SAFETY INFORMATION
Improper handling can cause serious damage to the appliance and/or injury to the user.
This unit is designed for domestic indoor use only. Do not use the unit for industrial use.
Any other use may invalidate the warranty. Please review the rating label located on the
rear panel of the unit for electrical and other technical data related to this unit. The unit
must be used in a properly grounded wall outlet. Please read and follow the safety
information listed below to reduce the risk of fire, electric shock, or injury.
SAFETY PRECAUTIONS
Carefully inspect the appliance. If you discover any faults, stop the installation and
contact the vendor.
In the event that the appliance is damaged on delivery, contact the supplier immediately.
The packaging material is recyclable and is marked with a recycling symbol. For disposal,
follow the local regulations. Packaging materials (plastic bags, polystyrene parts, etc.)
must be kept out of the reach of children, because they present a possible source of
danger.
Do not exceed the power outlet recommended ratings.
It is recommended the appliance be connected on its own, independent circuit.
The unit must be installed in accordance with Provincial and National electrical codes.
This appliance is equipped with a grounding plug. The plug must connected into an outlet
that is properly installed and grounded in accordance with the National Electrical Code
and local codes and ordinances is required.
When disconnecting the appliance, pull on the plug, not the cable.
Do not use extension cords or power strips with this unit. You may need to contact your
electrician if it is necessary to use a longer cord or if you do not have a grounded outlet.
Do not modify the power cord’s length or share the outlet with other appliances.
Any repairs and work on the appliance should only be carried out by the customer service
department, as unauthorized work could prove highly dangerous for the user. The same
applies to changing the power cable.
Component parts shall be replaced with manufacture’s components so as to minimize the
risk of possible ignition due to incorrect parts or improper service.
Unplug the unit if it is not going to be used for an extended period of time.
Always turn the unit off and unplug it from the electric outlet when cleaning.
Use outlets that cannot be turned off by a switch or pull chain.
Do not start or stop the unit by switching the circuit’s power on and off.
Never plug or unplug the unit with wet hands.
Do not stand on the base, drawers or doors or use them to support anything else.
4
Do not allow flames or sources of ignition to enter the appliance. When transporting and
cleaning the appliance, ensure that the refrigerant circuit is off. In the event of damage,
make sure that there are no ignition sources nearby.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge unless they
have been given initial supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
Do not store explosives or sprays using combustible propellants such as butane, propane,
pentane, etc., in the appliance.
Electrical components might cause leaking gas to ignite. You may identify such sprays by
the printed contents or a flame symbol.
Do not store explosives or sprays using combustible propellants such as butane, propane,
pentane, etc., in the appliance.
Do not use electrical devices inside the appliance.
DANGER : before you throw away your old appliance: Take off the door. Leave the parts in
place so that children may not easily climb inside.
When disposing of your appliance, please choose an authorized disposal site.
Do not under any circumstances cut or remove or bypass the third (ground) prong from
the power cord.
Do not locate the appliance in direct sunlight or in a room with a high ambient
temperature, or in the vicinity of any sources of direct heat, such as a radiator or oven.
To prevent back and other types of injuries, use at least two people to move and install
the appliance.
Install the wine refrigerator in a well ventilated area.
The temperature range for this refrigerator is optimized for Perishable food items .
Do not place hot or warm items into the refrigerator before they cool down to room
temperature.
Only use in an upright position on a flat, level surface and provide proper ventilation.
Do not pinch or kink the power supply line between the unit and cabinet.
Do not place any other appliances on top of the unit.
Do not turn the unit upside down, on its side, or at an angle off level.
BE CAREFUL WHEN HANDLING, MOVING, AND USING THE APPLIANCE TO AVOID EITHER
DAMAGING THE REFRIGERANT TUBING OR INCREASING THE RISK OF A LEAK.
5
Transportation and unpacking
If the appliance is transported in a
horizontal position, the oil from the
compressor may leak into the cooling
circuit. For this reason, allow the appliance
to rest in a vertical position for 12 hours
before turning it on, so that the oil flows
back into the compressor.
Remove the external packaging, remove
the protective plastic film from the surface
of the appliance (if used) and clean the
external parts of the appliance with a
cleaner designed for this purpose. Do not
use steel wool or any coarse agents,
which could irreparably damage the
surface of the appliance. Carefully remove
all papers and adhesive tape from the
appliance, doors and other parts packed in
polystyrene. Remove documents and
accessories from inside the appliance.
The packaging material is recyclable and
is marked with a recycling symbol. For
disposal, follow the local regulations.
Packaging materials (plastic bags,
polystyrene parts, etc.) must be kept out of
the reach of children, because they
present a possible source of danger.
Carefully inspect the appliance. If you
discover any faults, stop the installation
and contact the vendor.
Installation instructions
Before installation of your appliance
The placement of the appliance must meet the requirements in the section Operating
conditions on page 7 and must include a stable floor with a load-bearing capacity
corresponding to the weight of the appliance.
Level the appliance using the adjustable feet. Ensure there is a gap between the bottom edge
of the appliance and the ground, so that there is sufficient circulation of air. This will ensure
the optimal performance of the cooling system.
Check whether any coolant circulation pipes have been damaged during the installation.
Use the appliance only for the purposes for which it has been designed.
The appliance must be located on a rigid and even surface. In this way you will ensure free
circulation of the coolant and effective operation of your appliance.
If possible, place the appliance in a cool, well ventilated and dry room.
Do not locate the appliance in direct sunlight or in a room with a high ambient temperature, or
in the vicinity of any sources of direct heat, such as a radiator or oven. This would cause the
compressor to work harder, resulting in a substantially higher power consumption level.
either built-in or free-standing units. For free-standing installation, allow at least 4” of
clearance at the back, sides and top of the unit to permit the proper air circulation to
cool the compressor and condenser. Even for built-in installation, certain clearances
are necessary for optimal operation. In this case, allow 3/16” on both sides, 2” at the
rear and 1/16” at the top to ensure proper ventilation. Take care that the air vent at
the front of the appliance is never covered or blocked in any way.
NOTE: Models CL24WC2, CLFD24WC, CL242WBV, CL15WC and CL151WBV can be installed as
6
Installation instructions
FOR YOUR SAFETY
While performing installations described in this section, gloves and
safety glasses or goggles should be worn.
Tools you will need:
Installation dimensions (mm/in)
If your appliance is to be built-in, follow the diagram and chart below for appropriate
dimensions.
7
Installation instructions
Model CL15WC/CL151WBV CL24WC2 CLFD24WC CL242WBV
A 660mm (26″) 660mm (26″) 660mm (26″) 660mm (26″)
B 387mm (15¼″) 610mm (24″) 610mm (24″) 610mm (24″)
C 883mm (34 ¾″) 883mm (34 ¾″) 883mm (34 ¾″) 883mm (34 ¾″)
D 152mm (6″) 152mm (6″) 152mm (6″) 152mm (6″)
E 51mm (2″) 51mm (2″) 51mm (2″) 51mm (2″)
Electrical requirements
A 115 Volt (AC only) 60 Hz grounded electrical supply equipped with a 15- or 20- amp fuse or
circuit breaker is required. It is recommended that a separate circuit serving only your appliance
be provided. Use outlets that cannot be turned off by a switch or pull chain. Connect this
appliance to a 3-prong power supply outlet that has a ground terminal. If you only have a 2-prong
outlet, have it replaced by a qualified technician with an outlet that meets the local codes. DO
NOT USE AN EXTENSION CORD. Required nominal voltage and frequency are indicated on
the rating plate. The connection to the power supply and grounding has to be made according to
current standards and regulations.
8
Operation
Operating conditions
Proper operation of the appliance is
guaranteed only if the following conditions are
met:
The temperature in the room where the
appliance is located conforms to the
climate class stated on the appliance’s
rating label.
Maximum ambient relative humidity:
RH75%.
The appliance must be placed at a
sufficient distance from heat sources ( e.g.,
ovens, central heating, direct sunlight,
etc.).
The appliance must be located in such a
place that it is protected against the effects
of weather.
Regular maintenance is performed
according to the instructions in this user’s
manual.
The ventilation openings on the appliance
must not be covered.
Correct installation ( e.g. leveling, the
capacity of the system corresponds to
the specifications on the rating label of
the appliance).
For Models CLFD24WC, CL242WBV and
CL15WC, CL151WBV
Control elements
1) “ ” button
To turn the unit ON and OFF, press and
hold this button for approximately 3 seconds.
2) “ ” button
Energy conservation button: Pressing this
button for 3 seconds will turn the energy
conservation mode ON or OFF. In this
mode, the LED light and display will turn
off, and the C/ F light will be on.  
3) “ “ indicator light
Shows that the compressor is in operation.
4) “ C/ F” indicator light
The temperature scale is changed by
pressing the “ C/ F”  button.
5) “ ” button
Used to increase (warm) the temperature
in steps of 1 F (or 1 C).
6) “ ” button
Used to decrease (cool) the temperature in
steps of 1 F (or 1 C).  
7) “°C/°F” button
Press this button to switch the indicator
light between C/ F.
8) “ ” button
Turns the interior light ON and OFF. (If you
use this button, the light is no longer con-
trolled by the reed switch, and remains
ON.)
9) LED display
Shows the temperature of the internal
cabinet.
Setting the temperature
Insert the power plug into a properly
grounded power socket.
Use the / buttons to set the desired
temperature of the appliance. Each time
the / buttons are pressed, the
temperature will increase / decrease by
1 F (or 1 C).  
You can set the temperature in the range
of 39°F to 64°F (or 4°C to 18°C) .
9
Operation
For Model CL24WC2:
Control elements
1) “ ” button
To turn this unit ON and OFF, press and
hold this button for approximately 3
seconds.
2) “ ” button
Energy conservation button: Pressing this
button for 3 seconds will turn the energy
conservation mode either ON or OFF. In
this mode, the LED light and display will
be turned off; the °F/°C light will be on.
3) “ ” button (left)
Pressing this button will increase (warm)
the temperature of the upper chamber in
steps of 1 F (or 1 C).  
4) “ ” button (left)
Pressing this button will lower (cool) the
temperature of the upper chamber in steps
of 1 F (or 1 C).  
5) LED display
Displays temperature for the upper zone.
6) “
“ indicator light
Indicates that compressor is operating.
7) “°C/°F ” indicator light
Will change as the “°C/°F ” button is
pressed.
8) LED display
Displays temperature for the lower zone.
9) “ ” button (right)
Pressing this button will increase (warm) the
temperature of the lower chamber in steps of
1 F (or 1 C).  
10) “ ” button (right)
Pressing this button will lower (cool) the
temperature of the lower chamber in steps of
1 F (or 1 C).  
11) “°C/°F ” button
Pressing this button switches the indicator
light between °C and °F.
12)
“ ”
button
Turns the interior light ON or OFF. (If you
use this button, the light is no longer con-
trolled by the reed switch, and remains ON.)
Setting the temperature
When you press the or button, the
system will enter the set-up mode in the
upper or lower compartment automatically.
The LED will flash and display the setting
temperature.
When you press the button once, the
temperature will increase or decrease by
1 F (or 1 C). If you try to go beyond the  
minimum/maximum value that can be
established, the display will jump to the
lowest/highest adjustable temperature value
automatically. If a button is not pressed for 5
seconds, the LED will stop flashing and the
setting mode will be exited.
Temperature range for upper and lower
compartments: The temperature setting can
be adjusted from 39°F to 64°F
(or 4°C to
18°C).
10
Operation
Functions
Temperature Memory Function
If the power is suddenly lost, the set
temperature will be saved by the unit. Once
the power is back on, the unit will be at the
same set temperature.
“Close Door” Reminder Function
When you forget to close the door or the
door is not fully closed, there will be warning
alarm after 5 minutes.
Temperature Alarm Function
If the interior temperature is higher than
73°F (23°C), “HI” is shown on the display
panel and the buzzer alarm sounds
continuously after one hour. This indicates
that the inner temperature is too high, and
you should look for the reason. If the inner
temperature is lower than 32°F (0°C), “LO”
is shown on the display panel; the alarm
and the malfunction indicator light go on at
the same time.
Note:
If too many bottles are put in at once or the
door has not been closed tightly, the unit
will display the "HI" signal on the display
panel. This is normal. Please wait 5 minutes
after closing the door and “HI” will
disappear.
It is normal that the cabinet shows “HI” or
“LO” from time to time. If it occurs frequently
or lasts for a long time, you can restart the
unit by unplugging it, then re-plugging after
5 minutes. If the problem occurs again after
restarting, please contact customer service.
Before reconnecting the power, wait 3 to 5
minutes. Otherwise you could damage your
appliance. If you attempt to start the
appliance before the end of this time delay,
the appliance will not turn on.
If you turn on the appliance for the first time
or after a restart, or after it has been out of
operation for a long time, there may be a
temperature difference between the
temperature inside the appliance and that
on the LED display. This is a normal event
caused by the duration of the activation
period. Leave the appliance turned on for
several hours and the temperatures will
stabilize during operation.
11

Specyfikacje produktu

Marka: Summit
Kategoria: Szafka klimatyczna na wino
Model: CLFD24WCCSS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Summit CLFD24WCCSS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Szafka klimatyczna na wino Summit

Summit

Summit SWC1224B Instrukcja

9 Października 2024
Summit

Summit SWCDAF24PNR Instrukcja

9 Października 2024
Summit

Summit SWCDAR24 Instrukcja

9 Października 2024
Summit

Summit ASDW2412 Instrukcja

9 Października 2024
Summit

Summit STC6 Instrukcja

9 Października 2024
Summit

Summit SWCDAF24 Instrukcja

9 Października 2024
Summit

Summit SWCDRF24 Instrukcja

9 Października 2024
Summit

Summit SWCDRF24PNR Instrukcja

9 Października 2024
Summit

Summit STC12 Instrukcja

9 Października 2024
Summit

Summit SWC532LBIST Instrukcja

30 Września 2024

Instrukcje Szafka klimatyczna na wino

Najnowsze instrukcje dla Szafka klimatyczna na wino

Liebherr

Liebherr WPgbh 7473 Instrukcja

11 Marca 2025
Liebherr

Liebherr WPsd 5262 Instrukcja

11 Marca 2025
Sheffield

Sheffield PLA2400 Instrukcja

4 Marca 2025
Stoves

Stoves 600WC Instrukcja

28 Lutego 2025
Euromaid

Euromaid EWC46IB Instrukcja

27 Lutego 2025
Euromaid

Euromaid EWC171IB Instrukcja

27 Lutego 2025
Euromaid

Euromaid EWC122IB Instrukcja

27 Lutego 2025
Stoves

Stoves 300WC Instrukcja

27 Lutego 2025
Klarstein

Klarstein Shiraz 24 Instrukcja

13 Stycznia 2025
Klarstein

Klarstein Vinamour 46 Instrukcja

12 Stycznia 2025