Instrukcja obsługi Strong SRT 8010

Strong odbiornik satelitarny SRT 8010

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Strong SRT 8010 (23 stron) w kategorii odbiornik satelitarny. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/23
Digital Terrestrial
Receiver SRT 8010
User Manual
Picture similar
PART 1 • English
1
English
TABLE OF CONTENTS
1.0 INTRODUCTION 2
1.1 Safety Instructions 2
1.2 Storage 2
1.3 Equipment Set-up 3
1.4 Features & Accessories 3
2.0 YOUR RECEIVER 4
2.1 Front panel 4
2.2 Rear panel 5
2.3 Remote control 6
3.0 CONNECTION 7
3.1 Connecting to terrestrial antenna. 7
3.2 Connecting to TV set. 7
3.3 Connecting to digital audio amplifier 8
3.4 Connecting of external USB memory device 8
4.0 FIRST TIME INSTALLATION 8
4.1 Language select 8
4.2 Terrestrial settings 8
4.3 Preferences 9
4.4 Adjust antenna 9
4.5 Channel setup 9
5.0 MAIN MENU 10
5.1 Channel organiser 10
5.2 Installation 12
5.3 Preferences 14
5.4 Setup 15
6.0 DAILY OPERATIONS 16
6.1 Electronic Program Guide (EPG) 16
6.2 Channel information 17
6.3 Channel list and view mode 17
A.1 TROUBLE SHOOTING 18
A.2 SPECIFICATION 19
* €0.12/Min. from Austrian wired line
* €0.14/Min. from German wired line
per February 2008
PART 1 • English
2
1.0 INTRODUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
n In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a
surface which might obstruct the ventilation slots
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
n To direct sunlight or near any other equipment that generates heat; to rain or intense moisture;
to intense vibration and to any shock which may cause permanent damage to your receiver or to
any magnetic objects, such as loudspeakers, transformers, etc
n Do not use a damaged power cord. It may cause a fire or an electrical shock. Do not touch a
power cord with wet hands. It may cause an electric shock
n Never open the cover. It is dangerous to touch the inside of the receiver due to high voltage currents
and possible electrical hazards. Your warranty will be void if the receiver has been opened
n When the receiver is not used for a long period of time, you should unplug the power cord from
the wall socket
n Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean
your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, only after
disconnecting from the mains voltage supply. Make sure no foreign objects fall through the
ventilation slots because this could cause fire or an electric shock
n Do not place any objects on top of the receiver because this might prevent proper cooling of the
components inside
SAFETY PRECAUTIONS
n Do not open the receiver cover, as you will be exposed to a shock hazard. It will also void your
warranty. Refer all maintenance or servicing to suitably qualified personnel
n When you are connecting the cables, be sure that the receiver is disconnected from the mains
supply voltage. Wait a few seconds after switching off the receiver before you move the receiver
or disconnect any equipment
n It is a necessity that you only use an approved extension and compatible wiring that is suitable for
the electrical power consumption of the installed equipment. Please ensure that the electrical power
supply corresponds with the voltage on the electrical identification plate at the back of the receiver
If the receiver does not operate normally even after strictly following the instructions in this user manual,
it is recommended to consult your dealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against
electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep the
packaging away from children. When transporting the receiver from one place to another or if you are
returning it under warranty make sure to repack the receiver in its original packaging with its accessories.
Failing to comply with such packaging procedures could void your warranty.

Specyfikacje produktu

Marka: Strong
Kategoria: odbiornik satelitarny
Model: SRT 8010

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Strong SRT 8010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik satelitarny Strong

Strong

Strong SRT 7406 Instrukcja

13 Września 2024
Strong

Strong SRT 7009 Instrukcja

11 Września 2024
Strong

Strong SRT 7408 Instrukcja

9 Września 2024
Strong

Strong SRT 7600 Instrukcja

9 Września 2024
Strong

Strong XtraTV STB v1 Instrukcja

9 Września 2024
Strong

Strong SRT 7010 Instrukcja

6 Września 2024
Strong

Strong SRT 8910 Instrukcja

6 Września 2024
Strong

Strong SRT 7510 Instrukcja

6 Września 2024
Strong

Strong SRT 7008 Instrukcja

6 Września 2024
Strong

Strong SRT 6502 Instrukcja

2 Lipca 2024

Instrukcje odbiornik satelitarny

Najnowsze instrukcje dla odbiornik satelitarny

Reflexion

Reflexion CarSat-65MKII Twin Instrukcja

9 Października 2024
Oyster

Oyster Vision II Instrukcja

4 Października 2024
Triax

Triax TDS 64 Instrukcja

4 Października 2024
Triax

Triax TDS 78 Instrukcja

4 Października 2024
Axing

Axing SZU 17-02 Instrukcja

1 Października 2024
Thomson

Thomson TSR600CI Instrukcja

29 Września 2024
Kathrein

Kathrein CAP 500M plus Instrukcja

29 Września 2024
Aston

Aston Tracsat DiSEqC gestuurde H-H motor Instrukcja

28 Września 2024
Aston

Aston SatSeeker DS 200 Instrukcja

28 Września 2024
Pure Acoustics

Pure Acoustics Dream Nano Instrukcja

28 Września 2024