Instrukcja obsługi Strong SRT 6500 CI

Strong odbiornik satelitarny SRT 6500 CI

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Strong SRT 6500 CI (27 stron) w kategorii odbiornik satelitarny. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/27

Digital Satellite Receiver with Cryptoworks Embedded

and Common Interface SRT 6500 CI

User Manual

PART 1 • English

English

TABLE OF CONTENTS

1.0 INTRODUCTION 2

1.1 Safety Instructions 2

1.2 Storage 2

1.3 Equipment Set-up 2

1.4 Features and Accessories 3

2.0 YOUR RECEIVER 4

2.1 Front Panel 4

2.2 Rear Panel 4

2.3 Remote Control 5

3.0 CONNECTING THE RECEIVER 7

3.1 To a TV set, using TV SCART connection. 7

3.2 To a HiFi system and a TV set, using both A/V connections 7

3.3 To a VCR and a TV set, using both SCART connections 8

3.4 To VCR and a TV set, using build-in UHF modulator 8

4.0 STARTING UP FOR THE FIRST TIME 9

5.0 SETUP AND OPERATION 10

5.1 Before Setup 10

5.2 Setup Menu 10

5.3 Main Menu Settings 16

5.4 General Viewing Information 21

A1 PROBLEM SOLVING 25

A.2 SPECIFICATIONS 26

PART 1 • English

1.0 INTRODUCTION

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

n In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a surface which might obstruct

the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

n To direct sunlight or near any other equipment that generates heat; to rain or intense moisture; to intense vibration and to any

shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc.

n Do not use a damaged power cord. It may cause a ﬁre or an electrical shock. Do not touch a power cord with wet hands. It may

cause an electric shock.

n Never open the cover. It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical

hazards. Your warranty will be void if the receiver has been opened.

n When the receiver is not used for a long period of time, you should unplug the power cord from the wall socket.

n Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean your receiver with a soft lint-free

cloth slightly made damp with a mild soap solution, only after disconnecting from the mains voltage supply. Make sure no

foreign objects fall through the ventilation slots because this could cause ﬁre or an electric shock.

n Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside.

Safety Precautions

n Do not open the receiver cover, as you will be exposed to a shock hazard. It will also void your warranty. Refer all maintenance

or servicing to suitably qualiﬁed personnel

n When you are connecting the cables, be sure that the receiver is disconnected from the mains supply voltage. Wait a few

seconds after switching off the receiver before you move the receiver or disconnect any equipment.

n It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power

consumption of the installed equipment. Please ensure that the electrical power supply corresponds with the voltage on the

electrical identiﬁcation plate at the back of the receiver.

If the receiver does not operate normally even after strictly following the instructions in this user manual, it is recommended to consult your dealer.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture.

When unpacking it, make sure that all the parts are included and keep the packaging away from children. When transporting the receiver

from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its

accessories. Failing to comply with such packaging procedures could void your warranty.

1.3 Equipment Set-up

We recommend you consult a professional installer to set up your equipment. Otherwise, please follow the instructions below:

n Refer to the user manual of your TV and your antenna.

n Make sure that the SCART cable and outdoor components are in a good condition and the SCART connections are well shielded

This manual provides complete instructions for installing and using this receiver. The following symbols will serve as follow.

Warning Indicates warning information.

Indicates any other additional important or helpful information.Tips