Instrukcja obsługi Stihl NG 7


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stihl NG 7 (10 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
STIH)
STIHL NG 7 Gebrauchsanleitung
Instruction Manual
Notice d’emploi
Instrucciones de servicio
Istruzioni d’uso
Instruções de serviço
Handleiding
11NG 7
English
BA_SE_098_002_01_02.fm Printed on chlorine-free paper.
Printing inks contain vegetable oils; paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2004
04 8 588 772 . M . 4. . nted n zer a d 5 1 0,5 E Ext Pri i Swit l n
STIHl
Contents
Guide to Using this Manual ............ 11
Assembling the Rivet Spinner ........ 12
Chain Breaking ............................... 13
Rivet Spinning ................................ 15
Main Parts ...................................... 17
Special Accessories ....................... 18
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:A bullit marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
Guide to Using this Manual
12
English
NG 7
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Note or hint which is not essential
for using the machine, but may
improve the operators under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.
Engineering improvements
STIHLs philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
:Use two wood screws and washers
to mount the base to the workbench.
:Insert lever (1) in hole in eccentric
pin (2) and secure with screw (3).
:Screw extension (4) on to lever (1).
Assembling the
Rivet Spinner
588BA009 KN
1
2
3
4


Specyfikacje produktu

Marka: Stihl
Kategoria: Niesklasyfikowane
Model: NG 7

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Stihl NG 7, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Stihl

Stihl

Stihl KM 55 R Instrukcja

11 Stycznia 2025
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Stihl

Stihl GTA 26 Instrukcja

11 Października 2024
Stihl

Stihl CM 12 Instrukcja

9 Października 2024
Stihl

Stihl ALB 8000 Instrukcja

7 Października 2024
Stihl

Stihl ALB 3000 Instrukcja

5 Października 2024
Stihl

Stihl HTA 160.0 Instrukcja

29 Września 2024
Stihl

Stihl HTA 150.0 Instrukcja

29 Września 2024
Stihl

Stihl AutoCut 27-2 Instrukcja

27 Września 2024
Stihl

Stihl KMA 80.0 R Instrukcja

24 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane