Instrukcja obsługi Stihl MS 191 T

Stihl Maszyna do piłowania MS 191 T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stihl MS 191 T (106 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/106

Instruction Manual

Manual de instrucciones

Warning!

To reduce the risk of kickback injury use

STIHL reduced kickback bar and STIHL PMN

(3/8" Picco) or PM1 (3/8" Picco) chain

depending on sprocket pitch or other available

low kickback components.

Advertencia!

Para reducir el riesgo de lesionarse como

resultado de un culatazo, utilice la barra de

contragolpe reducido y la cadena PMN (Picco

de 3/8 pulg) o PM1 (Picco de 3/8 pulg) de

STIHL, dependiendo de la rueda dentada

usada y de otros componentes reductores de

contragolpe.

Read and follow all safety precautions in

Instruction Manual – improper use can cause

serious or fatal injury.

Lea y siga todas las precauciones de

seguridad dadas en el manual de

instrucciones – el uso incorrecto puede causar

lesiones graves o mortales.

STIH)

STIHL MS 191 T

1MS 191 T

English / USA

Printing inks contain vegetable oils;

paper can be recycled.

Printed on chlorine-free paper.© ANDREAS STIHL AG & Co. KG, 2003

0458 163 3021. M1. L3. PM. Printed in USA

STIHl

Contents

Guide to Using this Manual .............. 2

Some Important Safety

Precautions for Chain Saw Users ..... 3

Safety Precautions ........................... 5

Mounting the Bar and Chain ........... 22

Tensioning the Saw Chain .............. 23

Checking Chain Tension ................. 23

Fuel ................................................ 24

Fueling ............................................ 25

Chain Lubricant .............................. 25

Filling Chain Oil Tank ...................... 26

Checking Chain Lubrication ........... 26

Chain Brake .................................... 27

Information Before You Start .......... 28

Starting / Stopping the Engine ........ 28

Operating Instructions .................... 32

Taking Care of Guide Bar ............... 33

Cleaning the Air Filter ..................... 33

Motor Management ........................ 34

Adjusting the Carburetor ................ 34

Spark Arresting Screen*

in Muffler ......................................... 36

Checking the Spark Plug ................ 36

Replacing Starter Rope /

Rewind Spring ................................ 37

Storing the Machine ........................ 38

Checking and Replacing

Chain Sprocket ............................... 38

Maintaining and Sharpening

Saw Chain ...................................... 39

Maintenance Chart ......................... 43

Parts and Controls .......................... 45

Specifications ................................. 47

* see “Guide to Using this Manual“

Special Accessories ....................... 48

Ordering Spare Parts ..................... 48

Maintenance and Repairs .............. 49

STIHL Incorporated Federal and

California Emission Control

Warranty Statement ........................ 50

This manual contains operating and

safety instructions for all STIHL

MS 191 T series power saws.

The STIHL MS 191 T chainsaw is

designed especially for tree

maintenance, tree surgery and other

cutting work in confined spaces.

Allow only persons who understand this

Manual to operate your chainsaw.

To receive maximum performance and

satisfaction from your STIHL chainsaw,

it is important that you read and

understand the maintenance and safety

precautions, starting on page 3, before

using your chainsaw. Contact your

STIHL dealer or the STIHL distributor for

your area if you do not understand any

of the instructions in this Manual.

!Warning!

Because a chainsaw is a high-speed

wood-cutting tool, some special safety

precautions must be observed as with

any other power saw to reduce the risk

of personal injury.

Careless or improper use may cause

serious or even fatal injury.

STIHL's philosophy is to continually

improve all of its products. As a result,

engineering changes and improvements

are made from time-to-time. If the

operating characteristics or the

appearance of your chainsaw differs

from those described in this Manual,

please contact your STIHL dealer for

information and assistance.

English / USA

MS 191 T

Pictograms

All the pictograms attached to the

machine are shown and explained in

this manual.

The operating and handling instructions

are supported by illustrations.

Symbols in text

The individual steps or procedures

described in the manual may be marked

in different ways:

: Step or procedure without direct

reference to an illustration.

Description of step or procedure that

refers directly to the illustration and

contains item numbers that appear in

the illustration.

Example:

Loosen the screw (1)

Lever (2) ...

In addition to the operating instructions,

this manual may contain paragraphs

that require your special attention. Such

paragraphs are marked with the

symbols described below:

Warning where there is a risk of an

accident or personal injury or

serious damage to property.

Warning where there is a risk of

damaging the machine or individual

components.

Note or hint which is not essential

for using the machine, but may

improve the operator’s under-

standing of the situation and result

in better use of the machine.

Note or hint on correct procedure in

order to avoid damage to the

environment.

Equipment and features

This instruction manual refers to

several models with different

features. Components that are not

installed in all models and related

applications are marked thus *.

Such components are available as

special accessories from your

STIHL dealer.

Engineering improvements

STIHL’s philosophy is to continually

improve all of its products. As a result,

engineering changes and improvements

are made from time to time. If the

operating characteristics or the

appearance of your machine differ from

those described in this manual, please

contact your STIHL dealer for

assistance.

Therefore, we cannot be responsible for

changes, modifications or

improvements not covered in this

manual.

Guide to Using this Manual

Specyfikacje produktu

Marka:	Stihl
Kategoria:	Maszyna do piłowania
Model:	MS 191 T
Liczba ustawień temperatury:	5
Schowany element grzewczy:	Tak
Typ kontroli:	Przyciski
Wbudowany wyświetlacz:	Tak
Długość przewodu:	1.75 m
Położenie urządzenia:	Wolnostojący
Wysokość produktu:	845 mm
Szerokość produktu:	600 mm
Głębokość produktu:	600 mm
Waga produktu:	50078 g
Rozmiar produktu:	Pełny rozmiar (60 cm)
Kolor drzwiczek:	Stal nierdzewna
Kolor panelu sterowania:	Stal nierdzewna
Długość węża dopływowego:	1.5 m
Długość węża odpływowego:	1.9 m
Dostosowany do paneli:	Nie
Programy mycia:	60min 65°C,Auto 45-65°C,Eco 50°C,Hygiene,Intensive,Intensive 70°C,Quick 45°C
Liczba miejsc:	14 komplet.
Funkcja AquaStop:	Nie
Ilość programów piorących:	6
funkcja AquaSensor:	Tak
System suszenia:	Wymiennik ciepła
Poziom hałasu:	46 dB
Opóźniony start czasomierza:	Tak
Opóźniony start:	24 h
Pół wsadu:	Tak
Czas cyklu:	225 min
Temperatura (maks):	70 °C
Czujnik obciążenia:	Tak
Prąd:	10 A
Obciążenie:	2400 W
Pobór wody na cykl:	9.5 l
Zużycie energii na cykl:	0.93 kWh
Tryb wyłączenia:	0.1 W
Skala efektywności energetycznej:	A +++ do D
Wskaźnik konieczności płukania:	Tak
Wskaźnik soli:	Tak
Wskaźnik pozostałego czasu:	Tak
Zabezpieczenie przed dziećmi:	Tak
Sterowanie przez Wi-Fi:	Nie
Klasa efektywności energetycznej (stara):	A++
Kategoria prania:	A
Ekstra suchy:	Tak
Ochrona szkła:	Tak
Pobór mocy (pozostawiony):	0.1 W
Samoczyszczący:	Tak
Wbudowany zmiękczacz wody:	Nie
Asystent dozowania:	Tak
Roczne zużycie energii:	266 kWh
Kategoria suszenia:	A
Roczne spożycie wody:	2660 l
Maksymalna temperatura ciepłej wody:	60 °C
Tworzywo rury:	Stal nierdzewna
Automatyczne wykrywanie detergentu:	Tak
Zdejmowalna góra:	Tak
Czas trwania trybu czuwania:	0 min