Instrukcja obsługi Steinberg 4Knob PopD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Steinberg 4Knob PopD (2 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Pop D Manual
The 4 Knob Pop D is SampleTekk’s new and approved approach to sampled pianos. Its four sounds
and 88 presets provides you with a fast way of getting the sound you want for your production. The
four sounds and all presets in 4Knob Pop D are produced by SampleTekk’s Grammy winner and
several times Grammy nominee, Niklas Flyckt. During production several exclusive, vintage and very
sought-after hardware was used, such as:
Telefunken ELAM 271
Neumann M250
Coles 4038
Fairman TMEQ
RCA BA-25A
MXR Doubler
Roland Dimension D
For the Reverb channel HALions built in REVerence is used, but with SampleTekks custom made
impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some
of the impulses consists of a combination of several reverb types.
The Interface
The four main controls is where you set the blend. You can also mute and solo each sound.
Tip: When muting the sound, those samples are not triggered, so if you don’t use a particular sound,
rather than just pulling down the volume to zero, press the mute-button.
Direct – The original piano signal
Attitude
Modulation
Reverb
This is what you will see if you click the “Extended” button in the upper right corner of the control
panel:
From left to right:
HB Volume — sets the volume of the hammerback sound (this is when the mechanics on the
piano return after releasing a key)
Pedal Volume — sets the volume of the sustain pedal being pressed and released
Sensitivity — turn clockwise to emphasis the higher velocities, counterclockwise for a more
mellow playing. This control is neutral when in 12 o’clock position
Pre Delay — sets the pre delay of the reverb channel
Size — sets the size of the reverb
Time — sets the time of the reverb
Ambience — sets the amount of room acoustic
R — Turns on and off the Repedaling function. With this on, you can repeal sustain notes by
pressing down the sustain pedal directly after you have released it. In some occasions, you
might want to turn this off for a tighter sound

Specyfikacje produktu

Marka: Steinberg
Kategoria: Niet gecategoriseerd
Model: 4Knob PopD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Steinberg 4Knob PopD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd Steinberg

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

Waeco

Waeco MHI-1100 Instrukcja

2 Października 2024
Auralex

Auralex ProPAD Instrukcja

2 Października 2024
Sissel

Sissel Cherry Instrukcja

2 Października 2024
Auralex

Auralex ProGO 26 Instrukcja

2 Października 2024