Instrukcja obsługi StarTech.com TBT3TBTADAP

StarTech.com Niesklasyfikowane TBT3TBTADAP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com TBT3TBTADAP (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 08/04/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/TBT3TBTADAP.

Package contents

• 1 x Thunderbolt™ 3 to Thunderbolt adapter

System requirements

• Host desktop computer or laptop with a Thunderbolt 3 port

• Thunderbolt or Thunderbolt 2 device

• Thunderbolt cable

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/TBT3TBTADAP.

TBT3TBTADAP

Thunderbolt™ 3 to Thunderbolt Adapter

*actual product may vary from photos

Introduction

Use the TBT3TBTADAP adapter to connect a Thunderbolt 3 desktop

or laptop computer to legacy Thunderbolt devices, including

external hard drives, Thunderbolt displays, and Mac computers that

are Thunderbolt capable. The TBT3TBTADAP is compatible with rst-

generation Thunderbolt and Thunderbolt 2 devices, making it a cost-

eective method to connect newer devices to older peripherals.

You can use the TBT3TBTADAP to connect to rst-generation

Thunderbolt devices at 10Gbps and Thunderbolt 2 devices at

20Gbps.

Product diagram

Thunderbolt 3 USB-C connector

Thunderbolt 2 port

Connect the Thunderbolt adapter

Your computer’s Thunderbolt 3 ports might not function properly

until you update one or more of the following on your computer:

• BIOS

• Thunderbolt rmware

• Thunderbolt 3 controller drivers

• Thunderbolt 3 software

The required updates will vary depending on your computer.

For an up-to-date list of aected computers and instructions, visit

http://thunderbolttechnology.net/updates. If your manufacturer

isn’t listed on the Thunderbolt website, contact your manufacturer.

Make sure that the Thunderbolt device that you’re using with the

TBT3TBTADAP is compatible with the OS that you’re running on your

computer.

1. Connect the connector to the Thunderbolt 3 USB-C Thunderbolt

3 USB-C port on your desktop or laptop.

2. Use a Thunderbolt cable to connect the Thunderbolt device to the

Thunderbolt 2 port on the Thunderbolt adapter.

3. If you’re using a Windows® operating system, a pop-up message

may appear requesting permission to allow the adapter to

connect to your computer. If this message appears, click > . OK Yes

In the drop-down list, select Connect always OK and click .

The following is an example of a setup that includes the Thunderbolt

adapter:

Troubleshooting

If you are experiencing issues, there are some quick tests that you

can complete to narrow down the source of the issue.

Update your computer to use Thunderbolt 3

• Visit http://thunderbolttechnology.net/updates and look for your

computer in the list of aected computers. If your computer is

listed, then you must update your computer for its Thunderbolt

3 ports to function properly. To update your computer, follow the

instructions on the website or contact your manufacturer.

Verify that your components are Thunderbolt compliant

1. Make sure that you are using Thunderbolt compliant cables.

First-generation Thunderbolt and Thunderbolt 2 use the same

connector type as Mini DisplayPort. If you are using a Mini

DisplayPort cable that is not Thunderbolt compliant, replace the

cable with one that is compliant.

2. Make sure that the port on your computer is Thunderbolt 3

compliant. Thunderbolt 3 uses the USB-C connector type, but not

all USB-C connectors are compatible with Thunderbolt 3. If you

are using a USB-C port that is not Thunderbolt 3 compliant, switch

to a port that is Thunderbolt 3 compliant.

3. Make sure that your peripheral is Thunderbolt compliant. If you’re

not sure, check with the manufacturer.

Replace the Thunderbolt cable

Use the Thunderbolt peripheral with a dierent cable that is

Thunderbolt compliant.

Test the Thunderbolt peripheral

1. Use a second Thunderbolt peripheral, and see if it works. Ideally,

the second peripheral is one that you know works in other setups.

If the second peripheral works in the current setup, then there is

probably an issue with the rst Thunderbolt peripheral.

2. Use the Thunderbolt peripheral with a second setup. If it works

in the second setup, then there is probably an issue with the rst

setup.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation. Changes or

modications not expressly approved by StarTech.com could void the user’s authority to operate

the equipment.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide

industry-leading solutions. If you ever need help with your product, visit www.startech.com/

support and access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods

noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and

labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,

directors, employees or agents) for any damages (whether direct or indirect, special, punitive,

incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,

arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If

such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Use of Trademarks, Registered Trademarks, and other Protected Names

and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected

names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of their

respective holders.

Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other

countries.

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	Niesklasyfikowane
Model:	TBT3TBTADAP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com TBT3TBTADAP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane StarTech.com

StarTech.com MCM110SC2P Instrukcja

9 Października 2024

StarTech.com PLATE9M Instrukcja

9 Października 2024

StarTech.com RACKCONV1901 Instrukcja

9 Października 2024

StarTech.com PLATE9MB Instrukcja

9 Października 2024

StarTech.com ET91000LC2 Instrukcja

9 Października 2024

StarTech.com ET10GSFP Instrukcja

9 Października 2024

StarTech.com MCM1110SFP Instrukcja

9 Października 2024

StarTech.com ET91000SFP2 Instrukcja

9 Października 2024

StarTech.com ET91000LC Instrukcja

9 Października 2024

StarTech.com ET91000LCOAM Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024