Instrukcja obsługi StarTech.com ST121HDBTDK

StarTech.com przedłużacz AV ST121HDBTDK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com ST121HDBTDK (2 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Micro-USB port

for power

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 02/16/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/ST121HDBTDK

Packaging contents

• 1 x HDBaseT transmitter

• 1 x HDBaseT receiver

• 1 x USB cable for power (transmitter)

• 1 x universal power adapter (receiver) (NA/ EU / UK / AU)

• 1 x mounting kit (receiver)

• 1 x screw kit for mounting

• 1 x footpad set (receiver)

• 1 x quick start guide

System requirements

• HDMI video source, such as a computer or Blu-ray™ player

• HDMI display with cabling

• CAT5e or CAT6 cabling with enough length to reach from the

location of your video source to the location of your display

ST121HDBTDK

Compact HDBaseT™ Extender Kit - Up to 4K

*actual product may vary from photos

Preparing your site

1. Set up your local HDMI enabled video source in your desired

location.

2. Set up your remote HDMI display in your desired location.

Notes:

• Ensure the transmitter is situated near a USB power source.

• Ensure the receiver is situated near an AC outlet.

• Ensure all devices are turned o before you begin the

installation.

Product overview

Front view Rear view

HDMI®

input

RJ-45

output

About this product

HDBaseT is a standardized, zero-latency video distribution

technology that’s revolutionizing HDMI distribution. HDBaseT uses

an advanced method of modulation that enables you to distribute

uncompressed HDMI audio and video over standard network

cabling. This extender kit turns your HDMI signal into an HDBaseT

signal, which enables you to extend your source signal to the

HDBaseT receiver up to 70 m away.

Transmitter

Receiver

Front view Rear view

HDMI

output

Status LED

Power adapter

port

RJ-45

input

Grounding

bolt

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Hardware installation

1. Position the transmitter near the video source.

2. Connect the HDMI input on the transmitter to the HDMI output on

your video source.

3. Connect the included USB cable to the Micro-USB port on the

transmitter and to a nearby USB power source.

4. Connect a CAT5e or CAT6 cable (not included) to the RJ-45 output

on the transmitter and to the RJ-45 input on the receiver.

Note: This needs to be a direct connection. Do not route the cable

through any networking equipment.

5. Connect an HDMI cable (not included) to the HDMI output on the

receiver and to the HDMI input on your display.

6. Connect the included power adapter from the power adapter port

on the receiver and to an AC outlet.

7. Power up your display, followed by your video source. The image

from your video source will now appear on your remote display.

Note: The resolution performance of this extender will vary

depending on the length of your cabling. Please review the chart

below to determine the best solution for your setup. For best

results, StarTech.com recommends using shielded CAT6 cable.

Distance Maximum resolution

35 m or less 4K x 2K

Up to 70 m 1080p

Status LED indicator

The receiver has a two-color LED indicator that can be used to

notify you of the video status. Please review the table below to

interpret the LED activity on the receiver.

Activity Status

Solid blue Active link with transmitter

Alternated blinking

red and blue

Receiver has power, but no active link with

transmitter

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	przedłużacz AV
Model:	ST121HDBTDK
Kolor produktu:	Czarny
Napięcie wejściowe AC:	100-240 V
Wysokość produktu:	25 mm
Szerokość produktu:	68 mm
Głębokość produktu:	80 mm
Waga produktu:	252 g
Długość kabla:	0.1 m
Szerokość opakowania:	196 mm
Wysokość opakowania:	74 mm
Głębokość opakowania:	293 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Certyfikaty:	CE, FCC, TAA, REACH
Zasilacz sieciowy:	Tak
Napięcie pracy:	12 V
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 80 %
Skrócona instrukcja obsługi:	Tak
Przewody:	USB
Kanały wyjścia audio:	7.1 kan.
Pobór mocy:	18 W
Waga wraz z opakowaniem:	1600 g
Diody LED:	Status
Zakres temperatur (przechowywanie):	-10 - 60 °C
Model:	Nadajnik i odbiornik AV
Prąd wyjściowy:	1.5 A
Adapter zewnętrznego zasilania:	Tak
Prąd wejściowy:	0.6 A
Maks. rozdzielczość:	4096 x 2160 px
Typ wtyczki zasilającej:	Typ M
Możliwości montowania w stelażu:	Tak
System dźwięku:	Wielokanałowy
Maksymalny dystans transferu:	70 m
HDMI in:	1
Obsługa funkcji Plug & Play:	Tak
Zestaw do montażu:	Tak
Obsługiwane typy kabli:	Cat5e, Cat6
Wejścia RJ-45:	1
Wyjścia RJ-45:	1
Daisy chain:	Nie
Rodzaje końcówek zasilania w zestawie:	ANZ, EU, NA, UK
Certyfikat HDBaseT:	Tak